+ Reply to Thread
Results 1 to 22 of 22
-
03-07-2019 02:46 PM #1
My new sim... the build is complete
Hi all, a few weeks ago I posted that I was getting ready to build my sim. So now that it is complete I thought I would put some general information out there.
EQUIPMENT (PARTS LIST)
- SKY TRAK
- BENQ projector
- INTEL i7 8700 with 16GB of memory. Running a Geforce RTX 2070
- Country Club elite 5x5 hitting mat
- Carls Place Premium impact screen
- 1 inch electrical
- Theater curtains
- 2 inch thick memory foam
- 2 foot by 2 foot acoustical tiles.
- Heavy carpet
- Felt under pad
- Artificial grass
THE ROOM AND SET UP:
- The room is 14 feet wide by 17 long
- Room is set up for right hand golfers only
- Cage is made from 1 inch electrical conduit painted black
- My impact screen is 8 inches from the back wall
- I have a heavy carpet hung 2 inches behind the impact screen
- I am 8 feet 6 inches from the impact screen
- Right side wall has 2 inch foam running from the front wall for 7 feet and floor to ceiling
- Both the left and right sides have heavy theater curtains
- Floor is covered in heavy felt under pad and artificial grass.
-
03-07-2019 04:35 PM #2
Very nice, thanks for sharing!
"Be happy, but never satisfied." – Bruce Lee
-
03-07-2019 09:36 PM #3
- Join Date
- Mar 2014
- Location
- Oakville
- Posts
- 387
Nice room
-
03-08-2019 08:31 AM #4
Very nice!
Life dinnae come wit gimmies so yuv got nae chance o' gitt'n any from me.
-
03-08-2019 11:22 AM #5
Don't wanna be indiscret but how much about it costed you?
Chip
-
03-08-2019 01:57 PM #6
-
03-08-2019 02:08 PM #7
That's awesome
I like to call it a power fade
-
03-11-2019 06:45 PM #8
-
04-28-2019 11:47 PM #9
- Join Date
- Jan 2019
- Location
- Birmingham, USA
- Posts
- 4
-
05-01-2019 11:16 AM #10
- Join Date
- Jun 2003
- Location
- Pine Arbour Estates, Port Elmsley
- Posts
- 8,009
Why do you hate lefties
Lefty Lucas
I am abidextrous, I once golfed right-handed and now I shoot left-handed just as badly!
-
05-02-2019 03:09 PM #11
-
05-02-2019 03:11 PM #12
-
05-02-2019 03:11 PM #13
- Join Date
- Jun 2003
- Location
- Pine Arbour Estates, Port Elmsley
- Posts
- 8,009
Fine, now I will build a sim for lefties only!!
Lefty Lucas
I am abidextrous, I once golfed right-handed and now I shoot left-handed just as badly!
-
03-26-2020 09:00 PM #14
- Join Date
- Mar 2020
- Location
- bolton
- Posts
- 5
I'm new to the forum, looking to get some help and tips for my install (from anyone who's done the Sim setup). Sent you a PM with my phone number. Thanks in advance!
-
03-27-2020 10:48 AM #15
-
03-28-2020 03:22 PM #16
- Join Date
- Jun 2003
- Location
- Pine Arbour Estates, Port Elmsley
- Posts
- 8,009
Hey, I would love to come by sometime when the situation allows to see it and fond out after you've used it if there is anything you would change. Also, what is the height of the room?
Lefty Lucas
I am abidextrous, I once golfed right-handed and now I shoot left-handed just as badly!
-
03-28-2020 04:46 PM #17
Would be nice to have you... I have 9 foot ceilings, and I am 6 feet tall and stand on a mat that is about 1.5 inches thick. I have glanced the ceiling twice with driver, but only when I was quite out of position on my follow through. I have changed a couple of things and still have a couple of to do's. So starting with the to do's. First I will move the projector back farther and I will go to a 1080p projector as a minimum. Second, when the ball lands it hits artificial grass over quarter inch felt pad. I am going to replace the felt pads with those square exercise tiles. I have done some experiments and they kill the energy and sound. Things that I have already changed; I have wall mounted a monitor above the computer. Finally, have removed all the blankets and padding behind the impact screen and put in golf netting. The netting behind the screen completely removes all remaining energy (read no bounce back) even from my highest ball speed (150 mph).
-
03-28-2020 05:11 PM #18
- Join Date
- Jun 2003
- Location
- Pine Arbour Estates, Port Elmsley
- Posts
- 8,009
I am still a few years away from building one but it will be for sim and for club fitting so may be a bit different
Lefty Lucas
I am abidextrous, I once golfed right-handed and now I shoot left-handed just as badly!
-
03-28-2020 09:21 PM #19
-
03-29-2020 02:06 AM #20
- Join Date
- Mar 2020
- Location
- bolton
- Posts
- 5
Thanks for the prompt reply! So ordered angled iron and bungee cords. Blankets and cinema drapes come tomorrow. I was hoping tio find out few details as belkow:
Measured the space I'm working with. In a finished garage, 10.5 feet high, 11 feet wide and only 9 feet deep.
3 angle irons (2 vertical, one horizontal on top) and bungee cords to support the screen, 3 angle irons about 6-8 inches behind the screen with blanket/net to dampen the hit and wear on the screen (Carl's place premium screen)
Screen is 10.5 ft wideX8 feet high.
Not sure what is the minimum distance I need to have from screen to hit the balls.
Also need to make room for ceiling projector (Benq, short throw) and the skytrak (got the metal case for)
my main questions to start the project is:
should I cut the angled irons almost same as the screen size?
how much distance between the back wall of garage and the impact screen, even with 2 layers. I want to minimize that as I only have about 8-9 feet depth
how far do I need to be minimum to hit?
is 10.5 inch height enough? I'm 6 feet tall
Does hitting area need to be centered? Even though I have about 10.5 feet wide space, it will be better hitting off center to avoid and chance of hitting the overhead garage door.
How much distance for wedge hits? Will they always hit the ceiling or just the missed hit ones? (I still need to figure out club trajectories when hitting indoors.
Then I have whole bunch of questions about the protection around the frame and walls/ceiling etc
Sorry, I know it cant be that bad but I just want to get it kinda right so I didnt mes anything up. I'm sure you can help with some of these questions. Thanks for the help! Let me know if you need more info or pics.
-
03-29-2020 02:10 AM #21
- Join Date
- Mar 2020
- Location
- bolton
- Posts
- 5
Also, should I go with EMT pipes like you did or stick with angle iron? I cant find the 3 way connectors for them anywhere, unless I order from US and wait 3 weeks! angle iron seems easier to connect. Thanks again!
-
12-19-2021 10:19 AM #22
- Join Date
- May 2019
- Location
- cobden
- Posts
- 24
If you're looking for a game, look me up.
I have Skytrak and TGC19. i'm on Discord jackbeau #4853.
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
Re-build sale
By Brent4Hire in forum Left Hand ClubsReplies: 2Last Post: 10-12-2016, 03:38 PM -
Garage Build
By GWallman in forum Almost AnythingReplies: 0Last Post: 12-01-2012, 09:57 PM -
Need a bit of projector help for build....
By 96p993 in forum Home Simulators - GeneralReplies: 9Last Post: 11-28-2012, 08:47 AM -
Looking for someone to build a set for me
By sillywilly in forum Other Golf AdsReplies: 1Last Post: 04-14-2009, 09:22 PM -
I need someone to build me a set!!
By dnagolf in forum Golf ClubsReplies: 8Last Post: 07-31-2006, 02:03 PM