+ Reply to Thread
Results 1 to 30 of 37
-
04-11-2014 02:48 PM #1
- Join Date
- May 2007
- Location
- ottawa
- Posts
- 1,987
Shaft Advice - Looking for a stiffer Regular Flex ... if that makes sense
So I am looking for advice...
I am right on the edge of R and S flex shafts for my driver.
Each guy at Golf Town gives me a different suggestion, so I am wondering if anybody can suggest a good shaft that in a regular flex would play a little stiffer.
Maybe I am looking for the wrong thing, so please feel free to correct me.
Thanks
-
04-11-2014 02:57 PM #2
they are all different so its hard to say but if you find something you like in R and it's not quite as stiff you can tip it if you like
I got a fever. And the only prescription is more golf equipment.
-
04-11-2014 04:07 PM #3
- Join Date
- May 2007
- Location
- ottawa
- Posts
- 1,987
Is there one brand that plays stiffer than another?
-
04-11-2014 04:34 PM #4
sure, but its still all over the map even in a given shaft. There are no real standards as to what R and S are and even in a particular brand consistency is not always that great.
I got a fever. And the only prescription is more golf equipment.
-
04-11-2014 04:58 PM #5
Jeffc is right.
Here is a suggestion though. You could get a regular and tip it more than suggested to be ''in between''
AXE XCaliber Tour Graphite Wood Shafts
Features:
- The NEW T6 Wood is designed with a slightly softer lower stiffness profile than the T6+ but stiffer than the standard Xcaliber 6. Designed for players with high swing speeds and medium to quick tempos looking for slightly higher ball flight and spin than the T6+.
- The Tour T6+ and the NEW T7.5 Woods have the stiffest lower tip sections (16” to tip) than any shafts in the industry. Designed to produce penetrating ball flight with low spin for players with high swing speeds and quick tempos.
Live as if you were to die tomorrow. Learn as if you were to live forever.
Mahatma Gandhi
-
04-17-2014 12:57 PM #6
- Join Date
- Nov 2013
- Location
- Calgary
- Posts
- 323
The only thing I can think of is to give the Ping G20 reg flex shat a try ( the stock shaft from Ping) it is rated a reg flex, but is very close to a stiff shaft in my view. If you can get it new for 200 that is a great price, but I'm sure you could find a used one for a 100.
-
04-19-2014 09:04 AM #7
I was on that same edge a year ago. I was pushing all my shots off the T box to the right(Iam right handed). I ALWAYS usd a S flex driver. A young lad at Golftown suggested a R flex Callaway driver and so far so good. As stated earlier in a post the flex even though they say R and S are all over the map. It might be an idea to find a fitter that can fit a shaft perfectly to your swing. To me the right shaft is way more important than the brand of head
Mark K
-
04-22-2014 12:07 AM #8
- Join Date
- Nov 2013
- Location
- Calgary
- Posts
- 323
Golfisforfun, what did you end up going with?
-
04-22-2014 12:30 AM #9
- Join Date
- May 2007
- Location
- ottawa
- Posts
- 1,987
Nothing yet...
Callaway is sending me an R flex in the Tour Blue X2hot shaft. It normally plays at 46" and I want it at 45" max.
I am thinking of having 1/2" taken off both ends if that's possible...
-
04-22-2014 12:36 AM #10
- Join Date
- May 2007
- Location
- ottawa
- Posts
- 1,987
Or I just have an inch taken off the butt end...
Might look for a deal on shafts at golfworks to experiment ...
-
04-22-2014 09:06 AM #11
I'd echo Andre and try an Xcaliber Tour. There is a lot of bang for the buck in those shafts, and I find they play a bit stiffer than stock shaft ratings. I have one in my 3w and it's great.
-
04-22-2014 09:27 AM #12
- Join Date
- May 2007
- Location
- ottawa
- Posts
- 1,987
OK, but when reading the descriptions above, they say "high swing speeds and quick tempos" and thats not me... 95-97mph and a smooth tempo... So I am not sure if this would work for me...
-
04-22-2014 10:38 AM #13
Your swing speed is definitely on the higher end for reg flex. I'd call Golfworks and see if they had any Xcalibers in demo clubs you could try in their hitting bay.
-
04-22-2014 11:08 AM #14
- Join Date
- May 2007
- Location
- ottawa
- Posts
- 1,987
Thanks... I will try the Callaway shaft to start and see how it goes with the R flex, shortened to 45"...
Because I play a bit of a fade, I always have a slightly higher launch and spin, that is just natural based on my swing, but I don't want something that purposely launches higher...
-
04-23-2014 12:50 PM #15
- Join Date
- Jun 2003
- Location
- Pine Arbour Estates, Port Elmsley
- Posts
- 7,984
Get fitted is the best solution, shafts are expensive and at least with a fitting you can see the numbers and get a shaft profile to fit your swing and get the best possible results. It has saved me mucho moula as I only get shafts with profiles that fit my swing and stick with them.
Lefty Lucas
I am abidextrous, I once golfed right-handed and now I shoot left-handed just as badly!
-
04-23-2014 03:43 PM #16
- Join Date
- Dec 2005
- Location
- Stittsville
- Posts
- 1,512
-
04-23-2014 03:46 PM #17
- Join Date
- Jun 2003
- Location
- Pine Arbour Estates, Port Elmsley
- Posts
- 7,984
Yeah I know, there is this great certified club maker/fitter who goes on this site with great advice, you should check him out, just look above!!!!
Lefty Lucas
I am abidextrous, I once golfed right-handed and now I shoot left-handed just as badly!
-
04-23-2014 04:47 PM #18
How many shafts on the market fit your profile? IMHO this task is virtually impossible. A club fitter and even a store such as GW would have to have all shaft profiles from all shaft suppliers measured the same way with the same measuring tool. I know Wishon has a shaft database but they all can't be on there.Live as if you were to die tomorrow. Learn as if you were to live forever.
Mahatma Gandhi
-
04-23-2014 04:53 PM #19
- Join Date
- Jun 2003
- Location
- Pine Arbour Estates, Port Elmsley
- Posts
- 7,984
The shafts I saw were on a program at Artisan golf, I picked the ones I hit best and did not make a list. I have a couple I use with an interchangeable head
Lefty Lucas
I am abidextrous, I once golfed right-handed and now I shoot left-handed just as badly!
-
04-23-2014 06:03 PM #20
Exactly. Don can't keep a gazillion brands or he'd go broke. He just sticks with a few and for his survival he has exclusivity on certain clubheads. Now there must be some other shafts out there that fit you but finding out would mean that they would all have to be profiled from tip to butt and fit within your range.
Live as if you were to die tomorrow. Learn as if you were to live forever.
Mahatma Gandhi
-
04-24-2014 03:03 PM #21
- Join Date
- Jun 2003
- Location
- Pine Arbour Estates, Port Elmsley
- Posts
- 7,984
No one is going to profile my butt to fit anything!!!
Lefty Lucas
I am abidextrous, I once golfed right-handed and now I shoot left-handed just as badly!
-
04-24-2014 04:59 PM #22
-
04-24-2014 05:15 PM #23
- Join Date
- Dec 2005
- Location
- Stittsville
- Posts
- 1,512
Golfers in general, put WAY to much emphasis on the shaft. The shaft is one part of the overall finished product. The performance of all the components combined is what matters most. The shaft has two basic functions. It controls the overall weight of the finished club and, pay attention to this one, transfers the energy that was produced by YOUR swing.
These guys who go on and on about the flavor of the month shafts are offering nothing more than what THEY are experiencing with said shaft. To think that said shaft will perform for you in the same manner or feel similar is not logical. The human factor, each person's individual swing trumps that every time.
of all the components
Wishon's Shaft Profiling software is a valuable tool. Yes, it has thousands of shafts listed with an annual update on inventory and yes, each shaft is profiled identically. The beauty of it is when you have a established a reasonable and I mean reasonable profile based on the golfers swing characteristics, you can use the software to sort out the plethora of shafts available by categorizing them by weight, bend profile, by cost, ...
You guys would be quite surprised how many shafts in a certain bend profile category are extremely similar ! This where the clubamaker shows his stuff with his capabilities to tweak shafts.
My present Wishon 919, witch has been in the bag, starting it's 3rd season, is a Matrix Studio 74 "R" flex, spined, tipped 1'', playing 44.5'' long, D4. Not considered an expensive shaft by today's standards but a decent product. This thing is golden ! I have another identical 919 head witch I use to try out other shafts, always looking for that magic wand. I found it. It's my original driver !
For the hell of it, ( it was a very long winter ! ) I took two Studio 74 "R"s and played with the profile a little, one softer, the other firmer, just enough to make a noticeable difference form the original on either side. The verdict is "if it ain't broke, don't fix it ! "
The problem is the human factor at the amateur level. A different day means a different swing so finding the holly grail is wishful thinking at best.
Stop relying on your equipment to fix your game. If your clubs are within a reasonable fitting tolerance for you then things should be fine so go have some fun and work on your game for the time being.
-
04-26-2014 07:55 PM #24
- Join Date
- May 2007
- Location
- ottawa
- Posts
- 1,987
I am wondering is how many amateur golfers actually have a consistent enough swing to get any meaningful numbers from a launch monitor?
I am a 4 capper and a good driver of the ball, and my numbers are not all that consistent.
So is all this club fitting really accomplish anything for high cap golfers?
-
04-26-2014 08:35 PM #25
-
04-26-2014 08:36 PM #26
Xcaliber shafts are amazing, you just need to find the right one for your swing.
Obviously you're not a golfer.
-
04-27-2014 09:18 AM #27
- Join Date
- Dec 2005
- Location
- Stittsville
- Posts
- 1,512
Good point. Numbers where the ball makes contact with the center of the face should only be considered. If that does not occur, start by shortening the shaft. If all over the face still persists, go get some lessons !
-
08-31-2014 12:56 PM #28Bill WoodGuest
Another Xcaliber here. You may want to try the Tour regular. I have a couple of pulls in my shop. You could even take that regular and stiffen up by taking a 1/2 inch off the tip. Very tough to compare all the possibilities of all brands as mentioned.
-
08-31-2014 01:02 PM #29
- Join Date
- May 2007
- Location
- ottawa
- Posts
- 1,987
Where is your shop?
If I go buy the adapter, can you put one together for me?
Where are you located?
-
08-31-2014 01:15 PM #30Bill WoodGuest
A long way from you unfortunately. Melfort, Sk. chieflongtree is probably your best bet. Conversely I can send you the shaft. No charge. I have about 3 of them. Just pay for postage.
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
Regular Flex R9 shaft
By rview1 in forum Components & ToolsReplies: 0Last Post: 01-29-2012, 10:32 PM -
TaylorMade R9 fujikura 65 Stiff flex shaft trade for regular flex
By GWallman in forum Right Hand DriversReplies: 2Last Post: 09-10-2011, 11:57 PM -
i'm a math guy so this law stuff makes no sense to me... help
By sillywilly in forum Almost AnythingReplies: 3Last Post: 08-18-2009, 09:31 PM -
Shaughnessy makes sense
By Kilroy in forum Tour TalkReplies: 0Last Post: 04-20-2009, 06:20 PM -
YS-6 Regular flex driver shaft
By Chieflongtee in forum Components & ToolsReplies: 1Last Post: 05-24-2007, 09:45 AM