+ Reply to Thread
Results 91 to 120 of 1946
Thread: GGS LX launch monitor
-
04-22-2012 10:56 AM #91
- Join Date
- May 2010
- Location
- SC, Brazil
- Posts
- 647
It is not clear which type of connections it is using? Serial/usb or Bluetooth?
For outdoor use it would be very unpractical to have to plug in a laptop to get shot information!
-
04-22-2012 11:06 AM #92
-
05-01-2012 09:46 AM #93
- Join Date
- Oct 2010
- Location
- Stamford, CT
- Posts
- 228
Update on the LX page:
"GSA LX series launch monitors will be available mid/end May 2012."
not surprising. Want to place odds on it being June? I am still hoping for end of May.
-
05-02-2012 12:57 PM #94
- Join Date
- Dec 2010
- Location
- Post Falls
- Posts
- 521
It sounds like the GSA software update for spin will coincide with the release of the LX. That is "this month".
-
05-11-2012 09:35 PM #95
- Join Date
- Apr 2012
- Location
- MIAMI
- Posts
- 3
Has this been released?
Wondering if this is out and who are thinking of getting this?
-
05-16-2012 09:40 AM #96
- Join Date
- Mar 2012
- Location
- Gatineau, QC
- Posts
- 40
The LX2 has gone trough another physical hardware change.
It is now, a sideway camera instead of overhead.
-
05-16-2012 11:42 AM #97
- Join Date
- May 2012
- Location
- Birmingham, UK
- Posts
- 28
I've been emailing Martin about the LX because it seems the only option for me due to limited space (I can easily swing a club but don't have much distance from ball to screen). His latest reply earlier today stated that he currently has a lot of time which he will utilise by finally completing the testing of the LX (he emphasised the word finally himself in the email).
I've also noticed that he has changed the details on the site which a few days ago stated a release date of May/June however since his email today it now simply states May. I for one like to think of myself as an optimist and so despite the previous deadlines for the release of the LX not being met I am hoping that Martin comes through with the latest release date particularly considering his response to my latest email.
Good luck with it Martin! Hope it works out (for both of us).
-
05-16-2012 12:11 PM #98
- Join Date
- Oct 2010
- Location
- Stamford, CT
- Posts
- 228
I too am waiting on the LX. I hope Martin does meet the end of May timeline, as I will be in Tampa in mid-june and if he has it completed then I will take the opportunity to go to Naples and see it before buying it.
I like the change to the LX2 - now I might actually consider it.
-
05-16-2012 03:31 PM #99
- Join Date
- Apr 2012
- Location
- MIAMI
- Posts
- 3
I too am waiting for this. I did have a conversation a few days ago and was informed of the same thing, that the testing phase is on and if goes well then the release should be soon. He did mention that the camera for these units are on backorder until sometime early June.
-
05-18-2012 01:29 PM #100
- Join Date
- May 2012
- Location
- Birmingham, UK
- Posts
- 28
Martin seems to have updated the LX page again, he's got some added info and some new pictures of some of the previously mentioned addons that will be available (mini PC, 7" monitor, battery pack for outdoor use). He's also updated the release date from May back to May/June.
Its also worth noting that there is now the option to buy the LX2 (the club tracker) but no option for the LX1 yet (the ball tracker).
I think all of this added info outwieghs the slight setback in release date info (think we knew June was more likely anyway). Getting really excited now, only good thing about the wait is that it has given me loads of time to properly research the best setup for me in terms of projector, impact screen, side protection etc.
Here's the link: http://www.golfsimfactory.com/LXSetup.html
-
05-18-2012 01:41 PM #101
Do you really think it will be ready by June?
-
05-18-2012 01:54 PM #102
- Join Date
- Dec 2010
- Location
- Post Falls
- Posts
- 521
Oh, that is just hard to say. I see the "was free unmarked ball upgrade" is now going to be a "low cost upgrade". Wonder how he's going to control that? Firmware update? Eh, at this point I want the GSA update that uses spin so I can test it. Until I see how well that works I'm going to hold off on anything else.
-
05-18-2012 02:41 PM #103
I assume that same upgrade mm will apply for the spin cam as well as the LX? How is the spin cam coming mm? As well club cam?
-
05-18-2012 02:43 PM #104
- Join Date
- Dec 2010
- Location
- Post Falls
- Posts
- 521
I haven't messed with it. Until GSA uses the data I'm not going to bother. It is golf season after all. The GSA update is supposed to be available when the LX comes out.
-
05-18-2012 02:58 PM #105
So true mm. Keep us posted with the changes ad they happen. You are the resident expert here with the GSA gear.
-
05-18-2012 03:06 PM #106
- Join Date
- Oct 2010
- Location
- Stamford, CT
- Posts
- 228
Well, I am still hoping he hits an early June date so I can see it when I am in FLA in mid June.
-
05-18-2012 03:33 PM #107
- Join Date
- May 2012
- Location
- Birmingham, UK
- Posts
- 28
Well I got an email from Protee advising that their setup might not be best suited to the space I have available (I can easily swing a driver but they were concerened with the room available for the cameras). With this in mind my options are dwindling which is why I'm really hoping the LX is released soon and why I'm staying optimistic with the June release date haha.
All this golf sim excitement these last few weeks have blinded me, completely forgot that I've got a proper game of real golf to look forward to tomorrow lol. Although its currently raining here so still extremely excitied about my future golf sim career!
-
05-18-2012 03:48 PM #108
- Join Date
- Nov 2010
- Location
- Newark
- Posts
- 410
I have about 9.5' from tee to screen, protee works more than fine.
-
05-18-2012 05:07 PM #109
That's weird mm. What exactly is your space?
-
05-18-2012 06:26 PM #110
- Join Date
- Dec 2011
- Location
- Melbourne, Land of Oz.
- Posts
- 1,535
-
05-21-2012 03:44 AM #111
- Join Date
- May 2012
- Location
- Birmingham, UK
- Posts
- 28
Martin has released some further info about the LX in the 'Technical News' section of the site, its an interesting read because he goes through the development/testing progress of the product as of 19th May by explaining what has been tested and what is awaiting final testing etc. He also mentioned a production date of 10th June.
Here's the link: http://www.golfsimfactory.com/technical_news.htm
The first section of info about the LX is the same however if you scroll down to 'System Updates and Development News' section under the heading '19th May 2012 - GSA LX Development Stage' then you'll find the info I'mposting about.
-
05-21-2012 01:57 PM #112
- Join Date
- Feb 2012
- Location
- Colman, SD
- Posts
- 399
This is getting VERY interesting! I've been SOLD on Protee for quite some time. It's still the choice it I had to buy today. Fortunately, I don't have to make my decision today and this is getting interesting!
-
05-21-2012 07:24 PM #113
I know you all seem optimistic but do you all know the track record of Martins promises? I really hope it comes through.
-
05-22-2012 03:48 AM #114
- Join Date
- May 2012
- Location
- Birmingham, UK
- Posts
- 28
True, I've seen that the LX has been delayed for last 12 or so months now however all the testing info he's released indicates that he's at least now fully focusing all his attention on the LX (which from what I gathered from this forum is the main reason why the LX hasn't yet seen production).
He's also given another quick update yesterday regarding spin detection, it's not as interesting as the previous entry on the 19th however as stated above atleast it is showing that he is devoting all his time now on testing the LX (see below):
21st. May. 2012
GSA LX development stage
Tests today showed that the system works far better with balls without a line mark on them. i.e just the lettering or ball logo is better.
As nearly all balls have some kind of lettering or logo on them there is no need for the player to place extra marks or lines on the ball.
All the new LX ball spin detection development will be applied to the current Bcam ball spin camera system by the end of the week.
-
05-22-2012 08:33 AM #115
- Join Date
- Oct 2010
- Location
- Stamford, CT
- Posts
- 228
Bubba,
I know Martin's track record on development. The details he has given on his testing progress makes a June launch sound possible. That said, software and hardware development sometimes throws up issues that destroy the best laid plans.
-
05-23-2012 03:09 AM #116
- Join Date
- Apr 2011
- Location
- University Place, WA
- Posts
- 76
I too am looking forward to LX completion. I've been in touch with Martin regarding my modified cx5. He said that he'd have the software upgrade done by week's end. He said that the LX spin program will work with the bcam. He seemed pretty sure in his email. Looking forward to having my sim fully functional.
Last edited by wigalo; 05-23-2012 at 09:40 AM.
-
05-23-2012 04:21 AM #117
- Join Date
- May 2012
- Location
- Birmingham, UK
- Posts
- 28
More updates from Martin on his site (see link below), apparently the 2 IR matrix lamps aren't adequate engouh to fully light the ball up so he's added 2 more to the prototype (he's also updated the picture of the LX to show these extra 2 lights). It seems a bit weird that it has taken this long to discover this problem however at least we're still seeing some progress.
http://www.golfsimfactory.com/technical_news.htm
-
05-23-2012 08:05 AM #118
- Join Date
- Dec 2011
- Location
- Melbourne, Land of Oz.
- Posts
- 1,535
Dare I ask how the GC2 gets away with one IR flash and the LX looks like it will be a Christmas tree of them? Better camera?
-
05-23-2012 09:08 AM #119
- Join Date
- May 2012
- Location
- Birmingham, UK
- Posts
- 28
I'd imagine the camera is a lot better on the GC2, or atleast I'd hope so for 3 times the price of the LX1. Martin hinted that more than 4 lamps might be required which will mean having external lamps (he states that the max the LX can power is 8, therefore 4 internal and 4 external) I hope that it doesn't come to that therefore I'd be happy with the 4 because they'll all be internal, if he starts adding external lamps then I might rethink my options.
-
05-25-2012 08:39 PM #120
- Join Date
- Apr 2011
- Location
- University Place, WA
- Posts
- 76
A little disappointed...nothing from Martin on the Spin upgrade.
Last edited by wigalo; 05-25-2012 at 09:10 PM.
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
AccuSport Vector Pro Launch Monitor P3ProSwing with Launch Angle and Video Capture
By wzjy47 in forum Other Golf AdsReplies: 0Last Post: 11-10-2011, 10:52 PM -
GT Launch Monitor
By golfisforfun in forum General Golf TalkReplies: 18Last Post: 08-06-2007, 02:49 AM -
about the launch monitor at golftown
By Powerdraw in forum InstructionReplies: 11Last Post: 04-06-2007, 09:17 AM -
Vector Launch Monitor
By pwr_fade in forum Local StuffReplies: 12Last Post: 03-30-2004, 08:28 PM -
Launch Monitor
By natgolfer in forum InstructionReplies: 0Last Post: 10-10-2002, 09:45 AM