+ Reply to Thread
Results 151 to 180 of 569
-
03-08-2012 02:12 PM #151
- Join Date
- Oct 2011
- Location
- Location
- Posts
- 493
-
03-08-2012 04:56 PM #152
-
03-08-2012 05:15 PM #153
- Join Date
- Apr 2009
- Location
- Kitchener
- Posts
- 1,297
It's amazing the creativity that's inspired when you're set on a golf simulator and your wife is set on continuing to park in the garage...
-
03-08-2012 06:02 PM #154
- Join Date
- Dec 2011
- Location
- Melbourne, Land of Oz.
- Posts
- 1,535
Mmmm inconsiderate wives are global......
-
03-11-2012 08:03 AM #155
The Little Dig -- 1 of 2 -- Protee system with a lowered basement floor
For those who view a low basement ceiling as a challenge to be conquered...
1) lowered floor 2-2.5 feet (there is a ~1-1.5' ridge around the pit that comes from dropping reinforcing foundation walls; it is covered with black commercial carpet)
2) built 2x4 flooring to set system hardware in and to set artificial turf on
3) desktop computer off to the side under a shelf cover; touchscreen monitor and wireless keyboard sitting on top of that shelf
4) used as a home theatre (Panasonic AR100U projector hung ~20 feet back from screen)
5) black curtains on wall
6) insulation sheathing covered in black auto headliner on ceiling (installed in 4'x4' sections that can be removed if needed)
7) screen hung with bungees on angle iron brackets
-
03-11-2012 08:06 AM #156
The Little Dig -- 2 of 2 -- Protee system with a lowered basement floor
The final product (the picture of Tom Brady in the Superbowl has my 5'4" son standing in the lower right corner for dimension perspective); there are two can lights inside the pit that get turned off during movies or sim playing; the theater seating is sitting on the original flooring; the row of 4 beanbag chairs for movie watching is inside the pit
-
03-11-2012 08:19 AM #157
Very nice setup. Lots of work wih the dig but cam together very well.
-
03-11-2012 08:55 AM #158
- Join Date
- Mar 2010
- Location
- Broadalbin
- Posts
- 501
very nice. Wish I did that to my basement
-
03-11-2012 10:36 AM #159
- Join Date
- May 2010
- Location
- SC, Brazil
- Posts
- 647
Very nice!
Good to see another New England fan.
Is it the same screen you use for TV? or is it a pull down in front?
-
03-11-2012 10:59 AM #160
- Join Date
- Nov 2009
- Location
- Canada
- Posts
- 1,224
Very nice setup, Libbing and I am very jealous. It must be nice to have both setups for one screen and in your home to boot.
-
03-11-2012 11:16 AM #161
Univeristy of Michigan guy - need to support Brady! Although I was also rooting for UofM-er Manningham, who had a great game.
The screen I use for the movies is the same one I use for the sim. It's the screen that came from Protee. So far so good with it but I expect that if we keep watching movies I might end up getting another one for just movies and use the current one for the golf. Not sure yet how I'll rig that up. The screen is good right now but it is starting to stretch where the ball hits and you can see the scuff marks closer to the top from iron shots. The only time it is really noticable when watching TV / movies is when the background is either a solid color or a light color (white). When the picture has a lot of variation going on and/or its a darker color you can barely notice it. We watched Tower Heist last night and I don't think I ever noticed the scuff marks and only had a couple of scenes where the stretching / sagging was noticable. So I'm probably ok for a couple of years but I envision trying to figure out a double screen setup for movies at some point. If we keep watching movies (which I think is realaly cool - massive scale) then I won't feel bad about investing in another screen.
-
03-11-2012 12:28 PM #162
- Join Date
- May 2010
- Location
- SC, Brazil
- Posts
- 647
If you make it black or dark around the picture it will pop out even more.
I have a greenish carpet coming up a ramp to just below the picture. Makes a nice effect and most of the balls are coming back to you.
Real handy when you 3 and 4 put
-
03-11-2012 01:44 PM #163
- Join Date
- Feb 2012
- Location
- IL
- Posts
- 23
Sweet setup for sure....
-
03-12-2012 02:07 PM #164
- Join Date
- Jan 2011
- Location
- Reno Nevada
- Posts
- 69
Awesome job, very classy. The only thing I would add is a motorized drop down projector screen for movies and games.
-
03-12-2012 03:08 PM #165
Thanks. Yeah, I'm guessing the motorized drop down screen is in my future. I think I can get a 200" diagonal electric screen for $1000 from a quick search on amazon. But would need to look into that more to make sure its good quality etc. I'm pretty sure after another season or two it will be needed.
-
03-12-2012 09:18 PM #166
- Join Date
- Mar 2012
- Location
- MI
- Posts
- 21
A lob wedge shot wouldnt daMage your ceiling, would it?
-
03-12-2012 10:24 PM #167
I don't use a lob wedge so not a huge concern. My 56* sandwedge (my ~100 yard club) does often hit right up at the corner of the screen and ceiling so a lob would presumably hit the ceiling within a couple of feet of the screen. But the ceiling is covered with 1" thick sheathing that would dent, but the fabric I wrapped around it is auto headliner. It is a bit stretchy and thick, so I don't think it would dent. Maybe it would stretch. My theory is that the sheathing underneath would dent but the fabric would be ok). In any event, I made those in 4' x 4' tiles so that I could replace them if needed to over time or if I needed to switch out the front 4' with something else in case this solution didn't work. So far I've never hit the ceiling so it isn't tested yet. As I debated the design, I figured if I need to swap it out I could potentially put a 1-2" sheet of foam wrapped in the black fabric. That would also provide some nice sound insulation. The whole thing is so dark (between the ceiling and the walls and the dim lighting, I won't likely care if there are a few marks).
-
03-28-2012 01:29 AM #168
- Join Date
- Mar 2012
- Location
- fort worth
- Posts
- 79
im new to the projector world, how did you get a 9.5x7.5 hd picture, ratios don't work for me, what am i missing? I'm planning on 16:9 1080 picture and according to my calc my 12 wide screen will only be 6.7 tall.
-
03-28-2012 01:36 AM #169
- Join Date
- Mar 2012
- Location
- fort worth
- Posts
- 79
im new to the projector world, how did you get a 9.5x7.5 hd picture, ratios don't work for me, what am i missing? I'm planning on 16:9 1080 picture and according to my calc my 12 wide screen will only be 6.7 tall.
-
03-28-2012 01:41 AM #170
- Join Date
- Dec 2011
- Location
- Melbourne, Land of Oz.
- Posts
- 1,535
Correct on the math.
At 7.5 high need 13.3 wide.
Or 16/10 ratio is 12 wide.
-
03-28-2012 01:48 AM #171
- Join Date
- Mar 2012
- Location
- fort worth
- Posts
- 79
so how is his HD and 9.5x7.5?
-
03-28-2012 01:51 AM #172
- Join Date
- Mar 2012
- Location
- fort worth
- Posts
- 79
how are you liking that ar100, that's what I bought but still in box
-
03-28-2012 02:23 AM #173
- Join Date
- Dec 2011
- Location
- Melbourne, Land of Oz.
- Posts
- 1,535
like all projectors it will be subject to you ;
doing the calculations in the calculator pro at projector central first
and
putting it up and seeing how it works for your space and lighting
personally I don't buy Panasonic as they dudded me when an expensive TV was 1 year 14 days old- 14 days out of warranty
-
03-28-2012 02:42 AM #174
I am liking the AR100 a lot. I've never used another projector, so I can't really compare, but this one seems great. Plenty bright for the golf sim. Very nice for movies, etc. I've haven't seen any picture distortion at all watching TV / movies through a high def cable feed or through a DVD player. The picture modes are pretty easy to cycle through or customize.
When I first set it up, I had a little issue with getting a good connection between the HDMI cable and the slot. May have been an issue with the cable itself, but it was too loose and would occassionally come out. After mounting it on the ceiling, that hasn't been an issue at all.
Shoot4one - who's screen dimensions are you quoting? maybe I missed a post somewhere but I don't see a reference to that dimension Math should be pretty straight forward; height = 9/16 x width.
-
03-28-2012 06:43 AM #175
- Join Date
- Apr 2009
- Location
- Kitchener
- Posts
- 1,297
If you want a 9.5x7.5 HD image, you can't have a 16:9 ratio...it's that simple. I have that image size by running in 1400x1050 resolution. It's HD quality (1050 vertical resolution...30 pixels cut off from 1080) but it's not a wide format.
-
04-01-2012 04:46 PM #176
- Join Date
- Jan 2012
- Location
- Panama
- Posts
- 77
Home setup
Ok, here is my setup, hope to get my true strike's soon!
-
04-01-2012 04:47 PM #177
- Join Date
- Jan 2012
- Location
- Panama
- Posts
- 77
2 more
-
04-01-2012 07:54 PM #178
- Join Date
- Feb 2012
- Location
- Colman, SD
- Posts
- 399
VERY nice!! What are the dimensions of your room?
-
04-02-2012 10:16 AM #179
- Join Date
- Jan 2012
- Location
- Panama
- Posts
- 77
I would have to measure it, I used to have a poker table there, its not a new room. Thats a 10 feet wide screen I purchased from par2pro, so I am guessing its 13-14 feet wide. The projector is 296 inches back (from the wall) so it should be around 35-40 feet deep
-
04-02-2012 11:52 AM #180
- Join Date
- Jan 2011
- Location
- Reno Nevada
- Posts
- 69
I like how everybody gets their own blanket Does your impacts screen double as the movie projector screen also?
Thread Information
Users Browsing this Thread
There are currently 5 users browsing this thread. (0 members and 5 guests)
Similar Threads
-
Portable golf simulator setup?
By kwass in forum Home Simulators - GeneralReplies: 12Last Post: 04-19-2014, 08:29 PM -
What happened to the sticky with setup pictures?
By janton79 in forum Home Simulators - GeneralReplies: 1Last Post: 11-11-2011, 04:11 PM -
Your simulator setup for Optishot and Rate it!
By pboon in forum Home Simulators - GeneralReplies: 0Last Post: 12-29-2010, 02:41 PM -
Post drunk pictures of yourself...
By "Richard" in forum Almost AnythingReplies: 47Last Post: 11-21-2006, 10:34 AM -
Pictures
By chipandput in forum General Golf TalkReplies: 11Last Post: 05-09-2005, 05:04 PM