+ Reply to Thread
Results 1 to 2 of 2
Thread: 907D1 Head
-
02-19-2010 12:00 AM #1
- Join Date
- Jun 2008
- Location
- Nepean
- Posts
- 950
907D1 Head
I have noticed that the little piece of plastic on the head of my club is starting to raise up the shaft. Is this something to worry about? (Check pic)
The shaft is not coming out of the bottom of hte club nor does it look like it is moving around. But I dont want to do more damage if it is a easy fix (something that needs to be fixed)
Any ideas? Opinions?
-
02-19-2010 09:07 AM #2
It's one of two things 1)ferrule creep.. it's quite common or 2) your head is coming off
1) For ferrule creep warm the ferrule and move it away from the hosel, clean and sand off any paint on the shaft where the ferrule meets the hosel. Apply epoxy and move the ferrule back to the proper position. Clean off any extra epoxy with a damp cloth.
2) Loose head, start by looking to see to see if the grip is still aligned with the head. If not, the head is probably loose. Try and twist the head and see if turns. You may have to clamp the shaft, be careful as you don't want to scratch the shaft. If the head is loose it'll have to be removed and re-glued.Some people are like Slinkies... they're really good for nothing, ... but they still bring a smile to your face when you push them down a flight of stairs...
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
FS/FT Titleist 907D1
By 4ems in forum Left Hand ClubsReplies: 4Last Post: 11-05-2011, 11:19 PM -
Titleist 907D1
By paulfourputt in forum Right Hand DriversReplies: 3Last Post: 08-21-2009, 11:47 AM -
Titliest 907D1
By E Smith in forum Right Hand DriversReplies: 2Last Post: 06-30-2009, 08:54 PM -
Titleist 907D1 10.5
By Jeany1 in forum Right Hand DriversReplies: 0Last Post: 09-02-2008, 08:25 AM -
907d1
By pat6969 in forum Right Hand DriversReplies: 2Last Post: 02-01-2008, 09:52 AM