+ Reply to Thread
Results 1 to 24 of 24

Thread: Club Fitting

  1. #1
    Putter duffcity is on a distinguished road
    Join Date
    Jan 2021
    Location
    Ottawa
    Posts
    4

    Club Fitting

    Good morning everyone!
    I am looking to get new irons (potentially this winter) and I am wondering where the best place to go to get fitted to see which shafts, brand etc is right for me. Does anyone have a suggestion on what place is the best for this? I have heard people go to Golf town, Haime etc. but I would like some expert advice from you beauties on here. I am located in Orleans so East End would be great but I am willing to travel to the West End if necessary.

    Thanks in advance!

  2. #2
    Putter JKirk is on a distinguished road
    Join Date
    May 2018
    Location
    Ottawa
    Posts
    9
    In my opinion, Golftec is the best option. They're in the east end. I did a fitting there a couple of years ago and was thoroughly impressed.

  3. #3
    1 Iron john8888 is on a distinguished road
    Join Date
    Apr 2010
    Location
    ottawa
    Posts
    139
    i would also recommend Golftec ... and ask for Taylor ...he is a great fitter ... towards the end of winter he will be booked for a month or so in advance ...

  4. #4
    Gap Wedge GolfLogics is on a distinguished road GolfLogics's Avatar
    Join Date
    Nov 2022
    Location
    Ottawa
    Posts
    31
    Quote Originally Posted by duffcity View Post
    Good morning everyone!
    I am looking to get new irons (potentially this winter) and I am wondering where the best place to go to get fitted to see which shafts, brand etc is right for me. Does anyone have a suggestion on what place is the best for this? I have heard people go to Golf town, Haime etc. but I would like some expert advice from you beauties on here. I am located in Orleans so East End would be great but I am willing to travel to the West End if necessary.

    Thanks in advance!
    I am not sure if you have gone for a fitting yet, but I have recommend GolfTec Kanata and see Scott. He will fit you into exactly what you need. I would suggest maybe using a different retailer then the store they are located in be that is your choice.

    Kevin Haimes Centre probably has the best technology as a fitting centre and he is a very knowledgeable professional. You wont go wrong there either.

    I suggest staying away from the big box as the fitters there are not CPGA Professionals. To them it's about the sale not what you truly need.

    Ask lots of questions before you chose your fitter. If they are professional, they will answer every concern you have. You need to be comfortable with your fitting professional.

    I hope this helps.

    JK
    GOLF LOGIC'S GOLF CLUB REPAIR CENTRE
    OTTAWA'S LOGICAL GOLF CLUB REPAIR CHOICE

  5. #5
    Golf Guru justsomeguy is on a distinguished road
    Join Date
    Nov 2007
    Location
    around here
    Posts
    2,102
    I agree with the suggestion to avoid Golf Town. Kevin Haime's would be a good option but they are a long way from Orleans.


    I was not impressed with GolfTec in the east end in general, although I did not go there for a club fitting so your experience may be different. I did go for a club fitting at Golfworks on Industrial Avenue near St-Laurent and was impressed, although they are primarily custom club makers so if you are set on buying "brand name" clubs then that may not be what you're looking for.

  6. #6
    Arrow shooter Chieflongtee is on a distinguished road Chieflongtee's Avatar
    Join Date
    Jan 2002
    Location
    Golf Forums
    Posts
    7,985
    Quote Originally Posted by GolfLogics View Post

    I suggest staying away from the big box as the fitters there are not CPGA Professionals. To them it's about the sale not what you truly need.

    JK
    IMHO not sure about CPGA professionals being good fitters or them focusing on fitting.
    Most will direct their attention to teaching and/or managing a golf club and/or running the pro shop. Some will offer regripping and perhaps some reshafting as well as ordering direct from the manufacturers.

    Just my 0.02
    Live as if you were to die tomorrow. Learn as if you were to live forever.
    Mahatma Gandhi

  7. #7
    Arrow shooter Chieflongtee is on a distinguished road Chieflongtee's Avatar
    Join Date
    Jan 2002
    Location
    Golf Forums
    Posts
    7,985
    I hear what you saying. And undoubtedly I am pretty sure you will be doing a greater/better job than the BB stores. Were you ever a shoemaker? It seems to me that sadly itís a lost art. I will make sure to come pay you a vist when you open up.

    Here is my take on CPGA pros. Even though they go through extensive training the CPGA members wonít primarily focus on fitting. There may be exceptions to the rule but as a whole true club fitting is too expensive and too time consuming for the majority of them. I am sure youíre familiar with TXG in Toronto.


    Iíll doubt that youíll find any CPGA members with the same shaft inventory. Even Don and Les were limited. Not because of knowledge but because of the amount it costs to operate a street front store.( More Don than Less) Don was mostly dealing with KZG for heads and Accra shafts an maybe a few others IIRC- Les with Wishon-Maltby-Hireko etc..) And for historyís sake there was also Alís clubhouse in Greely( Retired unfortunately)
    https://procustomclubfitters.com/fit...itter-106.html

    Sure there might be some hack jobs in BB store. But if someone has been working there for more than 5 years I am pretty sure they are doing a better job than someone just starting out. Youíll find the same at CT and many other places. There are also professionals in other fields with diplomas plastered all over the wall but yet fail to deliver the goods by either not being good listeners, arrogant or simply incompetent. Finding the right club fitter is the hard part. There has to be good chemistry between the client and the fitter( and deliver the goods of course)

    There are many levels of fitting imho. I canít speak for KH as Iíve never been there.
    1) BB fitting. Decent but limited to what the manufacturers send them.
    2) Online fitting: Not bad especially with Ping and color coded chart and being able to set a target swingweight to your liking. However you donít get to try them. Not a fan a swingweight matching but thatís another topic
    3) Demo day fitting. Pretty good but only limited to one brand and their shaft offerings.
    4) Certified ICG Club Maker if you can find one in your area or a former PCS member. Again pretty good but usually limited to components. I would put Golfworks in that category but they definitely have an edge with their stock shaft inventory. Not even sure their fitting facility has been reopen as it has been closed during Covid.
    5) Places like TXG/ Modern Golf although Iíve never been to anyone of them. Impressive inventory. Launch monitor. And you get to see the results right before your very eyes. The works. But again it only takes one bad apple to ruin the bushel
    Anyway nice talking with you and best of luck with your store opening
    Live as if you were to die tomorrow. Learn as if you were to live forever.
    Mahatma Gandhi

  8. #8
    Gap Wedge GolfLogics is on a distinguished road GolfLogics's Avatar
    Join Date
    Nov 2022
    Location
    Ottawa
    Posts
    31
    Hello Chief,

    I grew up on a golf course a driving range and a golf shop. When I was ten and old enough to see over the counters I was put to work! Today they call that forced child labor, back in those days my father called it "I'm teaching the kid how to work". I learned a lot from that man especially when it comes to work ethics and thankfully the golf industry! Kids today miss out on that experience in my opinion

    My father was incredible not only at the craft of club repair but also the art of cobbling. He is the one that taught me that trade. Back in those days we fixed shoes we did not just buy new ones. I have a lot of cobbling equipment including stretching equipment and a very very old Singer Long Arm Leather Patcher. With that machine you can do wonders including golf bag repairs. One thing I do a lot of is replacing the "receptacle" or as some think of it the socket the spike screws into. It is a shame to throw out a good pair of shoes because of that issue.

    I went to school in Ohio to learn from some of the best to get the knowledge I have today plus the years of training under my father. To the BB it is all about money not the customer. Trust me on this I have that inside knowledge that would I am sure really make you shake your head.

    As for TXG that is truly an experience in itself. But it is run by CPGA professionals. The experience also cost you $400.00 for a full bag and takes hours to complete. Is this a bad thing? Absolutely not in my opinion you're going to get a very detailed comprehensive fitting at these facilities. But again, you get what you pay for, and they are the trained professionals.

    Now as for that extensive shaft and equipment inventory, they have don't think for a minute the manufactures are not involved. I come from Toronto, and I know Matt who started TXG. I have also directed many people to their Centre as if you are at that caliber in your game that is the place for you to go. No one has ever come back and was not ecstatic with the experience.

    When we look at a fitting facility locally that has top notch technology and launch monitors it would have to be Kevin Haimes in my opinion best in the area. But Scott Hay is also a top-notch fitter at GolfTec that will work it till it is perfectly right for the customer and their game.

    That is my experience and opinion anyway.

    JK
    Last edited by GolfLogics; 02-29-2024 at 03:39 PM.
    GOLF LOGIC'S GOLF CLUB REPAIR CENTRE
    OTTAWA'S LOGICAL GOLF CLUB REPAIR CHOICE

  9. #9
    Arrow shooter Chieflongtee is on a distinguished road Chieflongtee's Avatar
    Join Date
    Jan 2002
    Location
    Golf Forums
    Posts
    7,985
    Quote Originally Posted by GolfLogics View Post

    I have pictures but will not allow me to upload

    JK
    If you have a Kijiji account it's real easy to copy the URL of your images and upload them. Here is an example:

    Live as if you were to die tomorrow. Learn as if you were to live forever.
    Mahatma Gandhi

  10. #10
    Singles Match Play Champ 2009 Team Match Play Champ 2013, 2014 leftylucas is on a distinguished road leftylucas's Avatar
    Join Date
    Jun 2003
    Location
    Pine Arbour Estates, Port Elmsley
    Posts
    7,870
    I agree that CPGA pros are sometimes not the best for fittings, not to say that there are not some very good ones. I had 2 fitting experiences at Golftec and as a club builder I was not impressed with the approach or the end results. Just my 2 cents.
    Lefty Lucas
    I am abidextrous, I once golfed right-handed and now I shoot left-handed just as badly!

  11. #11
    Need a Caddy slash is on a distinguished road
    Join Date
    May 2010
    Location
    Bourget
    Posts
    481
    Same here with golftec Was going for an iron fitting and decided to get a few lessons Didn't work for me.
    Last edited by slash; 11-23-2022 at 08:22 PM.

  12. #12
    Sand Wedge Rlps23 is on a distinguished road
    Join Date
    Apr 2012
    Location
    Ottawa
    Posts
    27
    Quote Originally Posted by duffcity View Post
    Good morning everyone!
    I am looking to get new irons (potentially this winter) and I am wondering where the best place to go to get fitted to see which shafts, brand etc is right for me. Does anyone have a suggestion on what place is the best for this? I have heard people go to Golf town, Haime etc. but I would like some expert advice from you beauties on here. I am located in Orleans so East End would be great but I am willing to travel to the West End if necessary.

    Thanks in advance!
    Hi,

    Speaking for experience over the last 10 years, I have been fit by: Kevin Haime, Taylor at Golftec, Titleist and Mizuno regional reps during their fitting days and the BBs but by a very good fitter there at the Kanata location. However the best fitting I have received was at Rideauview, they have an amazing setup (outdoor trackman but from an indoor fitting bay) and although they are a Titleist shop, they have all major OEM carts. If I had to rate them: Rideauview hands down, then Golftec and then the rest served their purpose but none went above and beyond expectations like Rideauview, could not recommend more and it is 100 worth the drive from the East - hope this helps.

  13. #13
    Gap Wedge golfinturtle is on a distinguished road
    Join Date
    Aug 2009
    Location
    Ottawa
    Posts
    32
    Hey folks
    After an unavoidable absence, JK is back in business. We've started prepping the shop. Official opening will be April 1. The sign is up on the building, the phone number works again.
    We have 1000 grips in the shop, with 2500 more arriving next week.
    Come have your clubs serviced by a non-misogynistic team that cares about golfers and their clubs, not upselling you on gear you may not need.
    Golf season is just around the corner
    See you soon.

  14. #14
    Gap Wedge GolfLogics is on a distinguished road GolfLogics's Avatar
    Join Date
    Nov 2022
    Location
    Ottawa
    Posts
    31
    Hello all sorry for the delay in opening!

    Good news is we are here now and ready to fix repair or adjust anything you need.

    Need your clubs tuned up for the spring? Now is the time to adjust your loft an lie get those new grips on or put those shafts you have been craving in finally.

    We have a good supply of Golf Pride grips in stock including Tour Velvet in Standard Midsize and Jumbo and can get pretty much whatever you crave.


    We open early 8am and are here till 7pm through the week.

    Google Map search Golf Logics Ottawa to get directions and hours.

    See you all soon!
    Last edited by GolfLogics; 04-02-2024 at 12:00 PM.

  15. #15
    1 Iron BARGEGOLF is on a distinguished road BARGEGOLF's Avatar
    Join Date
    May 2009
    Location
    Ottawa
    Posts
    130
    Has anyone gone to Golf Logics since they opened up? any comments?

  16. #16
    7 Iron Kyaku is on a distinguished road
    Join Date
    Jun 2020
    Location
    Ottawa
    Posts
    78
    Quote Originally Posted by BARGEGOLF View Post
    Has anyone gone to Golf Logics since they opened up? any comments?
    i plan to go next time i need a change. theres some google reviews that look legit.

  17. #17
    1 Iron BARGEGOLF is on a distinguished road BARGEGOLF's Avatar
    Join Date
    May 2009
    Location
    Ottawa
    Posts
    130
    Tks⛳️⛳️⛳️⛳️

  18. #18
    Pitching Wedge jermart is on a distinguished road
    Join Date
    Sep 2010
    Location
    Ottawa
    Posts
    43
    Quote Originally Posted by BARGEGOLF View Post
    Tks⛳️⛳️⛳️⛳️
    One year late! If you need clubs worked on, JK is the guy to see!!
    To continue the OP question; has anyone been fit at Canadian Golf Club, and by whom in particular?
    Looking for just a driver fitting. Iíll take a look at KH and see Kevin or Jake. I was there a number of years ago, also for a driver. It was quite late in the year and was not impressed with the fitter. He has not been there for quite some time.
    Will also go by Rideauview.
    I was fit for irons /hybrids in 2022 by TXG. Was going to Toronto for a few days, and booked a fitting for one of those days. It was done extremely well, and was matched with a couple of irons / shafts that worked welll. Came down to price and went with Mizuno. I was advised prior to going to give them my price point.

  19. #19
    Singles Match Play Champ 2009 Team Match Play Champ 2013, 2014 leftylucas is on a distinguished road leftylucas's Avatar
    Join Date
    Jun 2003
    Location
    Pine Arbour Estates, Port Elmsley
    Posts
    7,870
    I was at Golftec, the fitting was average and questions were met with disdain. In other words I felt like don't ask questions, I'm the expert here, just get what I recommend. Hopefully others have had a better experience.

    GT fittings are subpar. I just had a customer come in for new irons after a GT fitting and they gave him no report of any kind. That just sucks to not get anything in writing. My customer is going to call back and get the info, not holding out much luck for him there.
    Lefty Lucas
    I am abidextrous, I once golfed right-handed and now I shoot left-handed just as badly!

  20. #20
    Pitching Wedge jermart is on a distinguished road
    Join Date
    Sep 2010
    Location
    Ottawa
    Posts
    43
    Appreciate the reply. I was looking at Golf Tech just last week and checked them out online. GolfLogics indicated Scott at the Kanata location was good, and based oh their site heís still there.
    I tend to ask questions, particularly when spending my money, so your first paragraph is not encouraging.
    Any one getting fit should definitely receive a detailed report. That should be part of the package. At TXG, now Club Champion, I received a report and had details on each and every shot; I had taken lot of shots.

  21. #21
    1 Iron john8888 is on a distinguished road
    Join Date
    Apr 2010
    Location
    ottawa
    Posts
    139
    Taylor at Goftec Ottawa was amazing. Sadly he is moving to another line of work.

    I really miss Don Irving .... wish he was still in the game.

  22. #22
    1 Iron john8888 is on a distinguished road
    Join Date
    Apr 2010
    Location
    ottawa
    Posts
    139
    Quote Originally Posted by jermart View Post
    One year late! If you need clubs worked on, JK is the guy to see!!
    To continue the OP question; has anyone been fit at Canadian Golf Club, and by whom in particular?
    Looking for just a driver fitting. I’ll take a look at KH and see Kevin or Jake. I was there a number of years ago, also for a driver. It was quite late in the year and was not impressed with the fitter. He has not been there for quite some time.
    Will also go by Rideauview.
    I was fit for irons /hybrids in 2022 by TXG. Was going to Toronto for a few days, and booked a fitting for one of those days. It was done extremely well, and was matched with a couple of irons / shafts that worked welll. Came down to price and went with Mizuno. I was advised prior to going to give them my price point.
    TXG is a cut above anything in Ottawa ... like a custom made suit

  23. #23
    Ace Travis is on a distinguished road
    Join Date
    Aug 2007
    Location
    Orleans
    Posts
    405
    Along the same lines of ClubChampion (formerly known as TXG) is Modern Golf, theyíve got a few locations across the GTA. If you wanted a very good experience at a lower price point than CC or MG in the GTA, you could look at Liberty Golf which is run by Matt Blois, formerly of the TXG YouTube channel. He has his own centre in the east end of Toronto I believe.

    As for Ottawa, Matt Robinson who used to be at Rideau View was great too. I think he owns a driving range out that way now. Iíd reach out to him as Iím sure heís fully outfitted there now.

  24. #24
    Ace Travis is on a distinguished road
    Join Date
    Aug 2007
    Location
    Orleans
    Posts
    405
    Having said all of that in my above post, I still firmly believe that there is a massive opportunity in Ottawa for someone to come in and offer a more upscale, comprehensive fitting AND build-shop service.

    The fitting is only 1/2 of the equation. Meticulous detail is required in the build phase to replicate what you were originally fit into. In almost all instances, you are reliant on the OEMs to hopefully get the build right in their industrial-scale assembly shops. Even something as simple as going from the standard size Tour Velvet grip on the demo club you used in your fit to a very commonly ordered midsize New Decade MCC grip that you ticked off on the order sheet (without ever trying) is upwards of 15 grams heavier and enough to throw swing weight off by 3 points alone. Combine that with head and shaft weight variances between what you used on the fit and what the manufacturer ultimately used to build your club and it can easily be another point or two off. Has anyone gone for a ďfitĒ and then found that you just couldnít replicate the same performance when the club came in? This is why.

    These may seem like small things, and to many they are, but to the above posterís point of a fitting being akin to a tailor-made suit, he is right, itís the exact same thing.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Similar Threads

  1. Club fitting and club making business in Victoria, BC
    By briansclubs in forum Other Golf Ads
    Replies: 1
    Last Post: 07-06-2015, 11:26 PM
  2. club fitting VS feel fitting
    By luigicactus in forum Club Making & Components
    Replies: 9
    Last Post: 03-07-2009, 12:52 AM
  3. club fitting?
    By xgamma in forum Golf Clubs
    Replies: 1
    Last Post: 09-03-2008, 03:51 PM
  4. Club fitting
    By chipandput in forum Club Making & Components
    Replies: 4
    Last Post: 03-27-2008, 05:46 AM
  5. myGolfDNA (TourIQ) TESTIMONIAL Ė Club Fitting and Custom Club Building
    By kontesto in forum Club Making & Components
    Replies: 3
    Last Post: 03-23-2007, 12:17 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts