+ Reply to Thread
Results 1 to 4 of 4
-
06-23-2022 08:12 PM #1
- Join Date
- May 2008
- Location
- Ottawa
- Posts
- 165
Changing lie angle on PXG irons 6,7,8,9,W,G,S
Bought a used set a couple of weeks ago and my misses are fat and to the left. Lie angle seems to upright. Thinking of taking them to Golfworx. Read that 3 to 5 iron should be standard. 6 to 9 should be 1/2 flat, W and G should be 1 degree flat and SW should be a degree and 1/2 flat. Any thoughts on progressively changing lie angle as opposed to having the same lie angle throughout. Thanks.
-
06-23-2022 10:24 PM #2
Best to check all of them separately. Some could be out of specs. Use a lie board or put masking tape on the sole of the club. Head to the range and hit off mats. If the mark is in the middle then the lies are fine. If towards the heel they are too upright.
The more lofted clubs will be the worst ones of the bunch.
https://www.youtube.com/watch?v=7bzTrKsaMbQLive as if you were to die tomorrow. Learn as if you were to live forever.
Mahatma Gandhi
-
06-23-2022 10:41 PM #3
- Join Date
- May 2008
- Location
- Ottawa
- Posts
- 165
Thanks Chief.
-
08-03-2024 01:59 PM #4
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Wedge lie angle same as rest of irons?
By northern33 in forum Club Making & ComponentsReplies: 7Last Post: 09-17-2010, 09:36 PM -
Changing shafts
By nokids in forum Club Making & ComponentsReplies: 2Last Post: 04-08-2010, 07:50 PM -
Changing for the best
By Kilroy in forum Tour TalkReplies: 0Last Post: 06-19-2009, 01:10 PM -
Changing lofts on irons
By Gropper in forum Club Making & ComponentsReplies: 3Last Post: 12-16-2008, 10:27 PM -
Change the Lie angle of Ping Irons???
By Brianson in forum Club Making & ComponentsReplies: 8Last Post: 08-18-2005, 05:58 PM