CorporateGolfXtra 2024
+ Reply to Thread
Results 1 to 6 of 6
  1. #1
    Putter Paulajewels is on a distinguished road
    Join Date
    Dec 2015
    Location
    Goodlettsville
    Posts
    2

    Need Help with DIY simulator enclosure

    Hello,
    I am so glad I found this site. I really could use some help. My plans are to buy a P3proswing simulator this week from Par 2 pro. I ordered and just received my Golf Airmesh Impact Screen 9.8 ft x 11.4 ft (3 m x 3.5) from Khamp sports $119. I also went to Joann fabrics and bought on sale 2 rolls of thick black felt 6 ft x 30 ft long $60. My plans are to hang the Impact screen from our ceiling in our basement 18 inches from the wall. The impact screen will only be attached from the ceiling it will be free floating on the sides. Than I will attach to the ceiling 2 - 3/4 inch pipe, perpendicular from the Impact screen and slide 12 clip rings on each pipe. Than attach the felt to the clips so there will be 10 feet draping down on the right than 10ft across the top and 10 feet draping down on the left side. My questions are:

    1. Is it okay that the impact screen isn't attached on the sides? I was going to Velcro the felt to the screen. I was hoping I don't have to build out a frame. Does anyone have any experience with not having a frame.

    2. I've read that there should be something behind the impact screen. Can I hang a large comforter behind it, will that do? Trying to save money here for the big purchase.

    Thank you

  2. #2
    Albatross mthunt is on a distinguished road
    Join Date
    Mar 2014
    Location
    Oakville
    Posts
    387
    Just buy archery netting to go behind. It's cheap and works great. IMO, not attaching on the side won't work. You'll need something to support the screen from the sides. Maybe build a pvc or metal frame.

  3. #3
    3 Wood Stonebattle is on a distinguished road
    Join Date
    Jan 2012
    Location
    Indianapolis
    Posts
    230
    Paula:
    I don't think it's a good idea to leave the bottom of the screen without support, so I agree with mthunt. Mthunt is also right about the archery netting, works quite well. There are also some golf netting options that would work as well. If the netting is setup right it will tend to support the sides, although the one setup like this I saw seemed to wrinkle a lot. I don't have this setup, but the issue seemed to be getting the right amount of bounce back and still have a good image. Hopefully, others with more experience with this type of setup will chime in.

    In any case, I hope you like your P3proswing.

  4. #4
    7 Wood wbond is on a distinguished road
    Join Date
    Feb 2013
    Location
    Livonia
    Posts
    173
    If you don't have any side support, i think you will see the net get pushed back quite a ways and as mentioned, you will more than likely have issues with lots of wrinkles/waves in the screen. If you are trying to stay on budget, pr20 from west coast netting is a pretty decent.

  5. #5
    6 Iron Rickyg is on a distinguished road
    Join Date
    Feb 2014
    Location
    Ingleside
    Posts
    85
    I have a impact screen that' is very thick I picked up in the stats and have it hanging on bungee cords for the side walls I used 2 painters tarps I also have a painters tarp hanging in the back of the screen and have no problems hitting golf balls into it or any problems with wrinkles my sides army attached to any thing

  6. #6
    Putter Paulajewels is on a distinguished road
    Join Date
    Dec 2015
    Location
    Goodlettsville
    Posts
    2
    Thanks everyone for your insights. I have an idea what I need to do. This is a great site.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Similar Threads

  1. Alternative wall covering for enclosure
    By Trooks in forum Home Simulators - General
    Replies: 12
    Last Post: 03-07-2019, 01:18 PM
  2. Constructing an Enclosure
    By wigalo in forum Home Simulators - Hardware
    Replies: 51
    Last Post: 10-07-2015, 05:00 PM
  3. GSA simulator help!!!
    By Carthy619 in forum Home Simulators - Hardware
    Replies: 8
    Last Post: 02-17-2013, 05:04 PM
  4. Where can you buy a used simulator?
    By drcabral in forum Home Simulators - Equipment
    Replies: 6
    Last Post: 02-08-2013, 09:18 AM
  5. Replies: 1
    Last Post: 02-16-2012, 08:58 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts