Need to put together clubs.

[psniddy]

I have a set of Snake Eyes 600b/600c combo irons that I would like to switch all to the 600b model. This means that I will have to change the heads of my 3,4, and 5 irons.

My question is can I re use the exising shafts or do I need to order the new shafts as well. I am also going to need to put the clubs together and was hoping to get some advice on who can do this at the best price or if I can do it myself and what I would need to do it.

[1972Apex]

A good clubmaker should be able to swap the shafts into the new heads without too much trouble, particularly if they are steel shafted. Most would charge about $10 each for the swap. It would cost you almost that much to buy the epoxy etc.
Not sure who would be the best in Ottawa but in Cornwall I use The Golf Zone and they always do a great job.

[Chieflongtee]

If you don't care about the old clubheads I can do it for free.

[Chris]

Similar to you, I have snakes eyes set 600c 5 iron and the 6-pw 600b. I'd be interested in buying the 600c's 3+4 heads from you.

[psniddy]

I will let you know once my new heads arrive. I also have a 2 iron thats the 600c model if you are interested. I won't be replacing it at all as I think I will be buying a 7 wood or carrying 4 wedges.

[Chieflongtee]

pm sent

[Chris]

I can't PM you!

When I try, I get a message from the Administrator saying that I can't post more than one msg every 60 secs. Even though I haven't PM'ed anyone in 2 years. I asked for someone to fix it but it seems that no one can fix the problem.

So if you don't mind please email me at cstmichael@rogers.com

Thanks

[psniddy]

Chris, I still have everything. I have the 2 iron plus 3,4,5 irons on the shafts and grips for the 6-pw. They are dg s300 with lamkin crossline grips. Take your time they aren't going anywhere so once you have the PM problem fixed let me know.

[Kilroy]

I asked for someone to fix it but it seems that no one can fix the problem.

As I explained to you, you are the only one with that problem as far as I am aware. I am trying to help you, but I need you to check if it works for you from another computer. Did you try it?

[Chris]

Thanks Dan.. Yes I'm at work now and still have the same problem. I tried to see if I could create a new profile but can't seem to find out where to go.

Would you please tell me the path on where to go to create a new profile. I'll create a new profile and see if the problem follows me and let you know of the results.

Thanks for all your efforts. Much appreciated!

Chris

[Chris]

Chris, I still have everything. I have the 2 iron plus 3,4,5 irons on the shafts and grips for the 6-pw. They are dg s300 with lamkin crossline grips. Take your time they aren't going anywhere so once you have the PM problem fixed let me know.

I have the 5 iron in the 600C. All I really need is the 4 iron and perhaps the 3. I may be able to use the shafts. I realize that you would like to sell everything. Perhaps we can work something out. How much do you want for the 3 & 4?

mail me @ cstmichael@rogers.com

[psniddy]

You can have everything 2,3,4,5 and the shafts for the rest for $50.

[Kilroy]

Thanks Dan.. Yes I'm at work now and still have the same problem. I tried to see if I could create a new profile but can't seem to find out where to go.

Darn, I figured it was a cookie thing. There is nothing out of the ordinary in your profile, so try creating a new user.
Log out and then re-register as a new user. You will have to use a new email address for now (can't have 2 the same) if it works, I can re-set the new user with your preferred address if nessesary. Sorry for the hassle.

Continue this in email dankilbank@ottawagolf.com please. Sorry for the thread-jack.

[Chris]

You can have everything 2,3,4,5 and the shafts for the rest for $50.

Deal! Where can I meet you! You belong to the OAC winter school. Can I meet you there
tonight?