Lie Angle Adjustment

**Law** · 01-17-2006 11:13 AM

Hi Guys,

Recently purchased some TA irons and I would like to get the lie angle checked/adjusted. Would this be a job for Don @ Artisan? Anyone know approximately how much this would cost? Thanks.

**Big Johnny69** · 01-17-2006 11:15 AM

That depends, what model did you pick up?

**challengegolf** · 01-17-2006 11:17 AM

Don at Artisan can do that easily and he is so easy to talk to.
Thanks
Claude

**Law** · 01-17-2006 11:20 AM

Originally Posted by Geoff Johnston

That depends, what model did you pick up?

845 silver scott

**Big Johnny69** · 01-17-2006 11:22 AM

Unless of course they are gunmetal irons. That is why I ask, because nobody around here will bend or adjust lie/loft angles if the irons are gunmetal. They can be checked but won't be adjusted. They'll have to go back to Cleveland for adjustments in that case.

**Big Johnny69** · 01-17-2006 11:23 AM

Oops, I thought TA meant Cleveland Tour Action line of irons. My mistake, must still have Cleveland on the brain.

Pretty sure anybody can do work on those irons.

**Law** · 01-17-2006 11:25 AM

Originally Posted by Geoff Johnston

Oops, I thought TA meant Cleveland Tour Action line of irons. My mistake, must still have Cleveland on the brain.

Pretty sure anybody can do work on those irons.

Sorry Geoff, didn't mean to mislead you. Tommy Armour Silver Scotts. Any idea what the cost would be for a 3-pw?

**Sakuraba** · 01-17-2006 11:31 AM

Same question for a 3-pw of titleist 704.cb

**KenB** · 01-17-2006 11:33 AM

I paid $45 to get my Ping eye's done at GT last spring.

**Big Johnny69** · 01-17-2006 11:34 AM

A place like Golfworks has a price per club but will give a discount if you get your set done. What that price is I can't remember. And as for Artisan, I don't know if Don does the same thing with his pricing. Best thing to do is call around. Maybe you can swing a deal that way. PM me guys I can give you tips on how to determine what you need to do with your lies. Loft I can't help you with that but I can save you some time with the lies.

**Law** · 01-17-2006 11:36 AM

Great! Thanks for the info guys.

**challengegolf** · 01-17-2006 11:43 AM

I think that Don charges $6.00 per club. It might be $4.00 if you do a set of 3 - PW. Give him a call.
Thanks
Claude

**1972Apex** · 01-17-2006 11:50 AM

Most places usually charge between $4-6 per club. Golfworks will also do bending to your specs. I'll be picking up a L&L machine myself within the next couple of months just to save myself the trouble of running around each time I get a new set.

**dbleber** · 01-17-2006 11:51 AM

Artisan is $6/club and $10/club if you do lie and loft. Just had mine done before Xmas.

**pagman** · 01-30-2006 09:33 PM

can one of the clubmakers on board to confirm that adjusting the lie angle e.g bending an iron 2 degrees flat does NOT change the loft?

Thanks

**DavidY** · 01-30-2006 10:26 PM

Can Tommy Armour irons be bent? I seem to recall (reading a post somewhere on the Net) that it cannot easily be done (without damage or breaking) on these irons.

Dave

**Kona Golf** · 01-31-2006 12:12 AM

Originally Posted by pagman

can one of the clubmakers on board to confirm that adjusting the lie angle e.g bending an iron 2 degrees flat does NOT change the loft?

Thanks

Either adjustment will not affect the other but I always check L & L before and after the adjustment. Not a big deal to do both while club is in the clamp!

Jim

**Law** · 01-31-2006 10:19 AM

Originally Posted by DavidY

Can Tommy Armour irons be bent? I seem to recall (reading a post somewhere on the Net) that it cannot easily be done (without damage or breaking) on these irons.

Dave

I'm getting mine done...

**downhillslider** · 01-31-2006 07:02 PM

Your Tommy's are safe with me Law ! Adjusted 4 lies and 2 lofts, no problem. The driver is ready and all that's left to do is to shorten and swingwieght them. Let me know when you will need them.

**downhillslider** · 01-31-2006 07:05 PM

Originally Posted by pagman

can one of the clubmakers on board to confirm that adjusting the lie angle e.g bending an iron 2 degrees flat does NOT change the loft?

Thanks

It will affect the swingweight a little.

**Chieflongtee** · 02-01-2006 09:32 AM

Originally Posted by downhillslider

It will affect the swingweight a little.

And 1/2 cpm change in frequency

**pagman** · 02-01-2006 06:25 PM

Thanks for the responses...I needed to settle an argument.

I'm not up to date on the technical stuff.....on the 1/2 cpm change in frequency response... does that mean club flex is more(stiffer) or less?

**Chieflongtee** · 02-01-2006 07:12 PM

Depens on which way the club was adjusted but between you and I that should be the least of your concern as 1/2 cpm is a mouse fart in the desert

**sharkhark** · 02-04-2006 03:40 AM

Originally Posted by Reid Masson

Most places usually charge between $4-6 per club. Golfworks will also do bending to your specs. I'll be picking up a L&L machine myself within the next couple of months just to save myself the trouble of running around each time I get a new set.

Thought I would help you out reid.
Here's one for you:
http://cgi.ebay.com/SCOTTY-CAMERON-P...QQcmdZViewItem

Supposedly works for irons as well as putters, or so they say.
Current bid only $2325 or BUY IT NOW $5000
(uh? plus shipping)

**Golfbum** · 02-19-2006 11:13 AM

I got a good deal when I got my Wishon's bent, $20 , 3-PW. It's nice to have friends in the business

Thread: Lie Angle Adjustment

Thread Tools

Display

Lie Angle Adjustment

lie angle

lie angle

Thread Information

Users Browsing this Thread

Similar Threads

Scotty Lie Angle Adjustment

Scotty needs a lie adjustment - where?

Lie angle adjustment

Lie Adjustment for SC

Get Lie Adjustment

Posting Permissions