Discuss all the sticks. No ads in this section please.
Can anyone tell me what I have, I picked up a used club at a course down here in Florida, it is a Cleveland wedge with a regular flex graphite shaft,deep hollow back with "launcher" marked on the back cavity and the letter "D" on the sole instead of either a "W"or "P"or "A". Anyone know what the...
I'm frustrated with the insane prices of new gear so I have started to dabble with the concept of building a Maltby set through Golfworks. I would get a driver, combo iron set, and 3 wedges. I could get all of this for around the same price as an M2 Driver and sleeve of Pro Vs. I'm...
TRUST ME this is the SECRET. No finer cleaner on the planet, your grips will last 2-3X's or even 3-5X's longer when used regularly (monthly, weekly). Why regrip at higher cost, if all your grips need is a regular cleaning (routine maintenance) with the correct product.
USA based product:...
I was interested in finding out if anyone has tried either the GX-7X-Metal Club or the C3iWedge advertised on the Golf Channel? If so, do you agree with their claims?
Hello everyone just had a quick question about the taylormade spider tour putter coming to Canada! I thought it was coming in left and right handed but as of now on the taylormade Canada sight you can only pre order the putters in right handed! Just wondered if anyone was sure if they were going to...
I went to GT last night to test drive the XR Pro irons - it's a toss up between them and the Apex Pro's for me right now - a forgiveness vs feel conflict, as they are respective tops for me in those two categories.
I also wanted to try out the Alpha 816 16* wood. Since getting the XR Pro 16...
I'll have a new driver in the bag this year thanks to Mrs. Claus. Knowing I can be a real pest to shop for, she opted for the simple route - a gift certificate at GT. ;-)
Adding to it, my buddy just bought himself my 2014 XR driver (which I loved the feel of, but spun way too much for me), I...
Personally, I use tiny, tiny, Cleveland TA 588 blades...despite being a twenty cap. If only my short game matched my iron game.
Just read that Rory will be playing the Callaway GBB Epic driver and a set of custom Apex MB's at his next tournament. He'll use the Titleist ProV 1x and Vokey wedges.
All these new drivers at $600 with endless adjustments here and there are they really worth it or is it just to make us buy new clubs? Well I say! They donít work, not for us mortals anyway; Iíll give you 2 different scenarios to prove it.
First of all, the problem is never the club but the...
Would be curious to know if anyone has one of these or has tried one of these, 2010 or 2020 models. Suppose to reduce breaking putts by 80%. From what I've seen, sold online only. Thanks.
Guess Tiger really does move the needle!
I've seen them on ebay for as much as $5000? Really? What am I missing here? Has to be a collectable thing or something right?
What's everyone using? I'm currently using 3 but entertaining the idea to going back to 2.
Anyone own an XE 1 wedge?
I think it's probably a good wedge for higher handicapped players
Wondering, what is the best online retailer for used golf clubs? Looking at purchasing clubs but don't feel like spending hundreds of dollars. What would you guys recommend for retailer? Thanks!
I see all the pros primarily working with a single club brand and I know a lot of that has to do with money and endorsements...
But what do most people here do?
I have pretty much maxed out my number of brands right now with:
Taylor Made Driver
Adams 4 Wood
Callaway 3 Hybrid
I have a post looking for advice on Ping irons and I'm also looking at Titleist irons. The 714 AP1 are on sale and a lot cheaper than the 716 AP1 model. The lengths are the same but the lofts are different. I would appreciate any feedback on these two sets.
I wandered into golf town looking for a grip on my R9 superdeep. I had just come from the range and realized I hit it better than my newer driver.
I found myself ogling and drooling over the new titleist offering. Had what I thought was my shaft and loft combo...
So I had tHe rare side...
I have been trolling looking for some items to come up but nothing has surfaced(makes me think they must be good) and I noticed someone suggested golfavenue.com to people in the WTB category.
Has anyone ever used it to purchase clubs? Overall how satisfied were you with what you got and what...
I'm trying to locate 9 gold and red striped ferrules for a set of Hogan 1972 Apex irons I'm refinishing. Any help would be greatly appreciated. I haven't been able to locate reproductions.
Just found out that Eric Cook was the first one who came up with the single length irons design.
Think positive thoughts... think positive thoughts...
OK - question for all the gurus out there. For over a decade I've hovered around a 15-16 handicap. Last year started with a slump like I've never ever had. Despite being the biggest eternal optimist anyone in my circle has ever seen, I...
I am 5'9" tall with a wrist to floor height of 35.5". I am brand spanking new to golf, so I don't want to invest a whole lot into a beginner set until I know if I really like the game.
Can anyone suggest some brands of golf clubs I should be searching for on used merchandise sites (ie Kijiji...
I was wondering if anyone has played these Nike Ignite 2 irons that Golf Town has on sale for $300.00. I know they are a re-development of an earlier nike iron (not sure which one) done so for the big box golf stores (Dicks, Golf Town). I was looking at them at Golf Town the other day and in terms...
I've got this set of clubs from numbers 3 to 9. I can't find anything on the internet about them, can anyone help me out on some information?
I'm in the market for new clubs and I'm interested in these. The G30's are similar in shaft length and lofts to my current setup, but are $300 more than the G25's. Any advice would be greatly appreciated, thanks.
As the title says, circa 2012 on, preferably in 35" w/slight arc. Contact me with price if you have one to sell.
What does DIADIC stand for?
(example linked... Cleveland 588 53* DIADIC wedge)
100$ 44.5 inches with rh callaway adapter
Just picked up a R15 10.5 LH demo driver from golftown and have been searching fruitlessly on internet for tuning guide for loft adjustment. Found lots of pictures and instructions on sliding weights but no lofts. Any help would be appreciated
Does anyone know anything about these putters.
It looks like a promo putter with the name of a paper printing company on the face.
I recently got hold of my SLDR-S 12* stiff shaft driver and really like it, but I was expecting a lower ball flight due to its advertised lack of spin relative to other clubs out there.
I found it very easy to hit straight and the distance was impressive, but the ball flight was still quite...
I just came across some post on a golf website that mentioned "The Maltby Playability Factor (MPF)" today and was intrigued to learn more about this.
That curiousity turned to horror as I see that the Adams XTD Forged irons that I play and love are ranked "Classic" and definitely not recommended...
I broke my 7i shaft from my Burner irons. I believe they are a superfast 85 stiff shaft?
Where can I get an oem replacement, or what can I order at GT or Golfworks as a very similar replacement. This would be a good time to get fitted for shafts, but I don't play as often as I'd like and I just...
Just wondering what people do when they buy Ping clubs secondhand and want them bent to their appropriate "dot colour". In a perfect world, you'd find the Ping clubs with the right dot colour off the bat and be on your way, but that's a long wait for the hobbits and Paul Bunyan's out there.
Any help or suggestions would be welcome. 54 years old and have a slow swing speed.looking for a new driver. Any suggestions on what driver would help with distance.
Anybody own a SLDR S Driver?
Whats your opinion on it?
10*, 12*, 14* or 16*?
Since this hasn't been started this season yet..let everyone know your current set up and any new gear
Here's mine.....for now!
Callaway Big Bertha Driver AD BB 7x
Callaway Big Bertha Mini 1.5 12 degree Matrix 7m3 X
Callaway XHot 2 3 & 5 Woods Aldila Tour Green X
TM Speedblade 5-AW...
Has anyone bought from Rockbottom Golf lately?
I'm interested in what your final shipping costs ended up looking like. I would normally ship to a NY UPS store and drive down to pick it up but I don't have the time right now. I don't want to see my $100 bargain double in cost by the time it...
Any thoughts and or reviews on the
Odyssey tank cruiser v line
Thanks in advance
Hey guys, long time lurker first time poster.
Bit of quick background. I've just been a go out once or twice a year type and have been traditionally quite awful. Last winter I spend the time and money and went to Graham Gunn's winter school and loved it. Got some new irons and wedges and have...
Did Anybody test those new clubs? Could you provide your comments?
I know that it's hard to tell sometimes if it's the head you love (or hate...) or the shaft or the particular combination of shaft/head, but try to narrow it down to what you think is a great shaft for you. Tells us what it is, what flight you are looking for and what flight you got with it.
I have a Cobra S3 driver that has a 46" shaft. I feel it is too long and adds greatly to ball spin. I was wondering if I were to cut 1.5" off the butt end of the club would it greatly affect performance and feel? I would be willing to sacrifice a few yards for increased accuracy and comfort while...
Ummm... Wow... Not much else I can say!
Anybody else hit these yet?
I ordered a set weeks ago and they are finally due to arrive...
Can't wait to see the actual yardage and ball flights outside.
There are currently 22 users browsing this forum. (0 members & 22 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.