Forum: Club Making & Components

Anybody gaming a Krank fire driver here? Your thoughts please. Dechambeau claims he greatly improved his dispersion since he made the switch. Of course it could be all hype so I would like to know if the claim is somewhat true or plain BS. Thanks

Bought a used set a couple of weeks ago and my misses are fat and to the left. Lie angle seems to upright. Thinking of taking them to Golfworx. Read that 3 to 5 iron should be standard. 6 to 9 should be 1/2 flat, W and G should be 1 degree flat and SW should be a degree and 1/2 flat. Any...

Hello I am looking for anyone that has a. 335 steel wood shaft R flex.

Project x hzrdus 65 grams regular driver shaft. Came from a srixon head. $50

So i have been out of the loop as far as club fitters for many years. Who is one of the best in Ottawa right now? Besides hitting the gym and working on my swing, would a good set of matched shafts help me to launch the ball higher and farther (senior player here 71 years young) ? I'm not...

If you have good independent service providers, closer to central Ottawa, that would be appreciated. Thanks.

Anyone know what the standard putter weights are for the Ping Vault 2.0 Ketch model? Looking for different weights locally and wrench... Thanks!

Want to try a senior flex shaft on my RH TM sim2 Max driver if anyone has one to sell

This might seem bonkers nonetheless I'm putting it out there. Is there somewhere that one can hit clubs with various grips (i.e. try grips besides just holding the club/grip)? The reason I'm asking is I'm hesitating between MCC and MCC4 and would like to know if there's a dramatic change in my ball...

Hi, I would like to re-shaft my irons from the 5 to the gap with DG 105's. I found all of them but the 5 iron, which seems to not exist in the country. One repair person suggested using a 4 iron shaft and another suggested a 6 iron shaft in the 5 iron, essentially hard or soft stepping that...

The bolt that screws into my shaft adapter snapped of my ping driver. Ping sent me a replacement shaft and bolt? what is the best way to reinstall the bolt. I need to add the rubber washer on the inside of the head without it falling and it is proving difficult.

Looking for a shaft/grip for my ping g25 4 wood. Snapped on me this week. I love the club head and am wondering if there is a pathway forward to having this done vs just buying a new club? Please let me know if this is something someone can do (remove my old shaft, put in a used replacement with...

Set of 7 true temper 355 tapered tip xp 95 stiff shafts from 5 to gap wedge. Selling for $38 each at golfwork. $100 for the set

Hi, Looking for someone to regrip a couple of clubs and cut a couple of shafts. Anybody close to Manotick/Barrhaven?

Does anyone know where I can get double bend putter shafts (no lie adj just offset). Every place I look they say out of stock. Thanks!

I have a set of 6 shafts (5 -PW) stiff flex with GP MCC Plus4 grips installed. Shafts were pulled by TXG golf in Toronto. $180.00 takes them!:thumbsup

Looking for a 454 tip weight that goes on a frequently analyser

I know I have had this on a thread before. However I have had a couple of members inquire about doing this so I thought I would just post it again. Copy it and save it and you'll be good to go in the future! I am taking business away from myself, but that's ok. I would prefer to save members...

http://forum.ottawagolf.com/showthread.php?99514-Cobra-One-Length-Forged-Tec-2022-1100&p=576579#post576579 Forgive my bluntness but the Sti2 were not designed for single length. Different lies, different weights, different ball position. If you're looking for forgiveness you'd have...

I splintered the tip of an older driver shaft and I was wondering if I would be able to tip trim the shaft for a three wood. I know it's possible but any guidelines around how much stiffer it will make the shaft? It's an Adila Vs Proto 70-X if that helps. I play an X flex in my driver but...

Looking for someone that could adjust the lie on 5 irons for me so that I don't have to leave them in a shop for weeks....Thanks

Deleted

Hi all, I am looking for a graphite shaft extension (preferably 2 inches). If any club builders here have one that I could buy off them, please send me a message. Thanks!

Is there a list of club makers in Ottawa? I see that Artisan Golf has retired and I may need help! johnreid

Figured someone on here might have a set of pulled or new project x 6.0 rifles 4-pw or whatever you have grip or no grips.... PM me Thanks

It appears that Costco has secured some stock of both the Clicgear 4.0 and Rovic RV1C (not the RV1S with the swivel front unfortunately) and has them available on their website with free shipping: Rovic RV1C - Rovic Golf Cart | Costco Clicgear 4.0 - Clicgear 4.0 Golf Push Cart | Costco

MPF Pro Series Driver shaft Titleist adapter (plays ONLY as standard) Fits all Titleist heads, TSi, TS, etc. Shaft is A flex Shaft plays at 45 inches.

Hobbyist doing some regripping work In orleans Quick turn around Decent and trusting Message me for more info

70 gram - regular Rarely used - Pulled from a Cobra F8 3 wood Grip like new. $40

I have LH P770s and I would like them bent an additional 2.5 to 3 degrees. What options are available out there? I will check out Golfworks.

Anyone in or around Ottawa do hot melt installations? Looking to get a bit added into my driver head and I don’t feel like buying the full kit at Golfworks. Thanks

Looking for 7 stiff shafts. Please send me what you have available. Thanks

I just bought a used set of irons and wedges, I need to have them extended by half an inch. Is my only option to go to GolfTown where they always say they will not remove and save your old grips as they will cut them off instead? The current grips are in very good condition. Who else in the...

Just curious to find out how many people on this forum have ever been fitted by a clubmaker/clubfitter? If yes did that make a big difference in your game? If no why not? Not talking about an occasional shaft change but a full clubfitting session involving launch monitor,swing speed, grip sizing...

Well after many years of fighting it, i have crossed over to the 'dark' side. LOL.I had a set of Tensei light shafts installed in my AP2 irons. I look forward to hitting them and see what all the hype is about. i expect to gain a yard or two and a bit higher ball flight or at least maintain the...

I am looking for a putter bending machine. Please text 705-367-4588 if you have one.

Hello, I'm a taller golfer with a set of Wilson Staff Di9 irons. I had a fitting at Golf Town that suggested I need my lie adjusted 2 deg. upright. I'd also like some lofts adjusted. The Di9s have such a tiny hosel that Golf Town and Golf Works won't touch them. Is anybody out there creative and...

Thinking about getting the lofts bent 3* strong on my Mizuno Mp18 MMC Fli-hi 3 and 4i (i.e. 3i goes from 19 deg to 16 deg, and 4i from 22 to 19). I've heard irons are typically only recommended to be bent 2 deg up or down, so curious as to (a) whether or not this would be feasible, and (b) whether...

As some of you may know Les Mcbride of Maxxfit golf, longtime OG'er is fighting a valiant battle with cancer. He has decided to sell all of his inventory of clubs, shafts, grips, tools that he has been using as a master fitter/clubmaker. He has asked me to help broker the sale. I will be...

Sold

I have picked up a set of used R flex shafts. The 370 shafts come pre tipped from Nippon (similar to .355). I am trying to find a chart showing tip length for each shaft so I can confirm that the shafts were not hard or soft stepped. No printing on butts of club and I haven’t been able to find a...

Is MaxxFit Golf in Stittsville still in business? The webpage seems dead and the Facebook page inactive? They are listed as a Wishon club fitter but that may be out of date?

Does any one know the bore size of these heads, I have looked on the net and found nothing really. I believe they are supposed to be .355TT but would like to know for sure. Thanks

I have a Tour AD DI 7S with a 910 driver adapter. Luckily the adapter fits the 910f too. Is it as simple as removing the tip, cutting 1/2” off the tip and then butt trim to length?