Forum: Club Making & Components

I know I have had this on a thread before. However I have had a couple of members inquire about doing this so I thought I would just post it again. Copy it and save it and you'll be good to go in the future! I am taking business away from myself, but that's ok. I would prefer to save members...

http://forum.ottawagolf.com/showthread.php?99514-Cobra-One-Length-Forged-Tec-2022-1100&p=576579#post576579 Forgive my bluntness but the Sti2 were not designed for single length. Different lies, different weights, different ball position. If you're looking for forgiveness you'd have...

Looking for someone that could adjust the lie on 5 irons for me so that I don't have to leave them in a shop for weeks....Thanks

Is there a list of club makers in Ottawa? I see that Artisan Golf has retired and I may need help! johnreid

MPF Pro Series Driver shaft Titleist adapter (plays ONLY as standard) Fits all Titleist heads, TSi, TS, etc. Shaft is A flex Shaft plays at 45 inches.

I have LH P770s and I would like them bent an additional 2.5 to 3 degrees. What options are available out there? I will check out Golfworks.

Anyone in or around Ottawa do hot melt installations? Looking to get a bit added into my driver head and I don’t feel like buying the full kit at Golfworks. Thanks

Looking for 7 stiff shafts. Please send me what you have available. Thanks

I just bought a used set of irons and wedges, I need to have them extended by half an inch. Is my only option to go to GolfTown where they always say they will not remove and save your old grips as they will cut them off instead? The current grips are in very good condition. Who else in the...

Just curious to find out how many people on this forum have ever been fitted by a clubmaker/clubfitter? If yes did that make a big difference in your game? If no why not? Not talking about an occasional shaft change but a full clubfitting session involving launch monitor,swing speed, grip sizing...

Well after many years of fighting it, i have crossed over to the 'dark' side. LOL.I had a set of Tensei light shafts installed in my AP2 irons. I look forward to hitting them and see what all the hype is about. i expect to gain a yard or two and a bit higher ball flight or at least maintain the...

Hello, I'm a taller golfer with a set of Wilson Staff Di9 irons. I had a fitting at Golf Town that suggested I need my lie adjusted 2 deg. upright. I'd also like some lofts adjusted. The Di9s have such a tiny hosel that Golf Town and Golf Works won't touch them. Is anybody out there creative and...

Thinking about getting the lofts bent 3* strong on my Mizuno Mp18 MMC Fli-hi 3 and 4i (i.e. 3i goes from 19 deg to 16 deg, and 4i from 22 to 19). I've heard irons are typically only recommended to be bent 2 deg up or down, so curious as to (a) whether or not this would be feasible, and (b) whether...

As some of you may know Les Mcbride of Maxxfit golf, longtime OG'er is fighting a valiant battle with cancer. He has decided to sell all of his inventory of clubs, shafts, grips, tools that he has been using as a master fitter/clubmaker. He has asked me to help broker the sale. I will be...

Sold

I have picked up a set of used R flex shafts. The 370 shafts come pre tipped from Nippon (similar to .355). I am trying to find a chart showing tip length for each shaft so I can confirm that the shafts were not hard or soft stepped. No printing on butts of club and I haven’t been able to find a...

Is MaxxFit Golf in Stittsville still in business? The webpage seems dead and the Facebook page inactive? They are listed as a Wishon club fitter but that may be out of date?

Does any one know the bore size of these heads, I have looked on the net and found nothing really. I believe they are supposed to be .355TT but would like to know for sure. Thanks

I have a Tour AD DI 7S with a 910 driver adapter. Luckily the adapter fits the 910f too. Is it as simple as removing the tip, cutting 1/2” off the tip and then butt trim to length?

Golf clubs not recommended for bending lofts and lies Shaft replacement guide Grip changing Measuring club length

Will a TM SLDR driver adapter fit and TM M6 driver head?

Hey,anyone use shafting glass beads in epoxy prior to glueing a driver head ...is it necessary if one wants to do it at home or is Golfworks a better option?

Hi I have two callaway v series fairwaywoods. I would like to get the shaft from the 3 wood put into the heavenwood - (I bought the heavenwood from golf avenue and the shaft had been swapped and shorten) to bring it back to its original specs. I would need two shafts removed and then one...

Former golf professional offering custom grip installation service in Carleton Place. Quick turnaround time with custom installation to fit your needs. You bring the grips, I do the work! Services Offered: Regripping (customer provided grip) $5.00 per club / $60 per set of 14 Re-size Grip...

I know many have suggested either Don or Les in the past, but neither of them are in business any more for various reasons. With that being said, is there another fitter that is recommended, or am I stuck with Golf Town/Kevin Haime/GolfTEC now? Edit: not to knock Kevin Haime's, I do get lessons...

Just starting out into doing some club making, and I'm wondering if anyone has a collection of some old/used ferrules that I could buy? Since new ones look to be pretty expensive at GolfWorks, I'm trying to find some for relatively cheap so that I don't have to worry about wasting money if I make...

Asking for a friend, looking for a set of TT Elevate R Flex 95g. .355 tip Thanks John

I have a 2016 M2 Driver and was thinking of adding weight to it to increase distance and accuracy. I have a 90-95 mph swing with a slight slice. The head feels a little light. Will adding weight help? If so, do I use lead tape or change the club weight (now 4 gm) to a higher weight (6, 8,...

Hey all, Need to get my irons re-gripped. Just looking for advice on the best place to go and best price. Cheers, Troy

Want to buy a bending machine.

I have two 3-irons at the moment. I am looking to swap the shafts between the two heads, and also to swap the grips between the two shafts. Please PM me if you are able to do this!

Installed some MCC +4 Midisized, 1 round and want to get them pulled. My usual club guy is not around so looking for someone to do the work at reasonable cost. PM me. Thanks !

Has anyone had a fitting at GolfTec? If so how's the selection of OEM shafts and clubs? Thanks

The price of grips is extortionate in Canada. When I go down to the States, I’ve bought Lamkin Crosslines on sale for as little as $3.56cdn, but golfworks has them for $7.25 and they never go on sale. Where can I get grips for less money?

Hey folks, Wondering if anyone here has a roll of grip tape that I could buy off of them? Can't find any locally at the moment, was hoping to grab some this weekend. PM if you have any and the price for it. Thanks all!

Not sure where to post this ask, so moderator may move it. I have custom fit clubs but the shafts have come loose in two of the irons. Will pay to have someone fix. I live Gloucester area.