Forum: Home Simulators - Hardware

I just purchased a new Poly blend impact screen off of ebay. The price and discription seemed good. See below MOVIE SCREEN IMAGE QUALITY. STRONG ENOUGH TO TAKE A REAL GOLF BALL. The Poly blend is commercial grade and designed for heavy use. The trade off is some grain in the image. If you...

Hi guys Anyone know if there is any way of getting the GC2 to work with E6 simulation software? GC2 is a great LM, but I'm not so impressed with the foresight simulation software. Thanks :-)

Hi at all, I´m quite new to this forum. I found because I need some helpwith my preowned Vector Pro with manual lenses. The Power LED is not indicating the operating or charging mode. Also the two green front LED´s are only sometimes indicating the operating mode. But the unit will be...

I have been away for a bit. What is the current price for a HMT to connect to the GC2. I am hoping they are a bit cheaper so I can make the plunge! Thanks!

Hi there , I just set up perfect golf with my gc2 , looks great but I'm pretty sure my gc2 is not reading my shots rights, everything is going super short and duck hooks and wierd stuff like this , I do shoot the odd shots like this don't get me wrong but pretty sure the gc2 is not reading right....

Hi, I have a couple of golf nets with grommets. I want to hang it in my barn and stretch it in between the wooden beams. The beams are about 16 feet apart. I also already have a few mats I am looking for suggestions on weather to use some sort of conduit, or a steel cable to feed through...

Hi there I'm having problems pairing my GC2 to to my computer . It's asking for a passcode and I'm not sure what the pass code is or where can I get it. Have you guys come across this problem? Thanks

Hi there, just wondering which projector to go with , my screen is about 118 inches wide and about 101 inches high, I am able to mount the projector anywhere so that's not a problem , looking not to cheap out , I hear allot of talk about the Benq 1085 st but it seems the lumins are a bit shy , is...

Hey guys im looking for a decent projector for my optishot sim. It will be about 11ft from screen, im hitting from about 10 ft. Was looking at benq1080st but my budget is about 600, less is better. It will only really be used for optishot in the garage. 12x9 net hq2 material from par2pro

Hi all. New to this site but sounds like some good information on here. I am looking to get a system that is accurate as a simulator and can work out on the range a well. Seems like GC2/HMT is the way to go. Any advice would be appreciated.

Hi everyone. Just picked up a used X2 that will be here in a few days. I'm going to be putting something dedicated together (probably a new room off the basement) in the spring but wanted to get something setup to test it out and hit some balls over the winter. I'm in the process of finishing...

My GC2 is all over the place reading wise and I was hoping someone here wouldn't mind emailing me the calibration tool. Email is jrbratten@yahoo.com

My GC2-T unit is acting crazy. For putts, chips, drives, FW and other lower launching shots it is right on track. The higher the launch angle the wackier the lines get. For instance a wedge that I obviously hit straight shows being hit 20 yards left. Any ideas what the heck is going on? Could...

Well, I'm making progress... garage space cleared X launch monitor, projector and laptop acquired X garage heater (waiting on 220v circuit install) hitting mat X enclosure and impact screen :confused I have some things in the works on the enclosure, and looks like I am going with a...

I have recently setup a basement range with a CCE mat along with the vector pro. I am currently hitting into a net and displaying the path through a 32 LCD TV. I only have 7.5 foot ceiling space and won't be able to swing my driver or woods hence I have no intentions of setting up a full blown sim....

Finally decided on the ProTee Base Pack 2, includes putting, both cameras ,ProTee2.o and TgC. question now is where to buy?? Swingsense? Golfsimguys? Par2Pro??Spectrum Golf Could use some help.....I am in Michigan

Hey guys wondering if anyone has any experience with a setup like this. I have my desktop computer with dual monitor. Its an EVGA GTX 960 with 4 outputs (3x DV and 1 HDMI). I have both my monitors connected via the DV and the projector using the HDMI. Im having issues displaying to the...

Any suggestions on how to remove wrinkles. I have a few that are bugging me and are not in the hitting area. Remember reading something a while ago but can find that post. Thanks

I've owned a Vector Pro for a short while and rarely used it. When I first got it I went through and hit most of my clubs and it worked fine. Recently I noticed that it didn't seem to focus as sharply when doing the calibration. I seem to recall that the focus was pretty sharp and that I could...

Can anyone with a vector pro help me out. I bought a unit without a power supply and need to know what amp I need? I see its 12-16v and Im guessing its at least 2amps by the looks of some in the photos.

I want to have at least 1 camera recording my swing when I use my gc2 set-up. Was at a golftec today and was amazed by what they had for this. Basically it is always recording and a microphone picks up the ball strike and it automatically pulls up that swing. The best part was big plastic buttons...

What length, quantity and strength of Bungee cords should I buy to attach a 12'x9' screen? I attached metal angle to the wall and ceiling. There is 5"of space between the straps/eyelets and the metal angle. I would like to buy these on Ebay. Thanks for your help!!!

Anybody have a link or file that contains course descriptions for the FS1 software? All I can find is FSX. Email is honkeytiger@yahoo.com Thanks

I have been scouring the couple of good golf simulator forums over the last 12 hours trying to get a definitive understanding of what the status of this apparently unstable situation is. I thought I had finally completed my decision-making process on what system I was going to go with -- GC2 with...

Does it exist? I'm running fs1 software on a GC2-T model and although I have it selected in the options screen, nothing is happening. Foresight won't answer my emails on the subject.

Hey guys i am currently looking for a screen for my basement sim build, i am looking at the PR-20 from west coast netting, anyone use this, or have any thoughts on the product? thanks

Building a golf simulator in my basement and need some help with picking out a projector (one of the last pieces). Screen is 110" wide, 84" high, 138" diagonal. Would like a throw distance of about 14 - 15 feet so the projector is mounted behind the hitting mat area (11 - 12 feet). I've been...

I'm looking for ideas on short throw projectors. This is going to be dedicated only to using the optishot. The kids have a home theater/gaming in the basement so I'm not looking to use it for movies, 3d, or gaming. I haven't determined a screen size, just deciding on going with a 720p projector...

Anybody know the manufacturer of the stance and hitting mats used at Golfsmith stores in their sims? I have a CCE and HATE it. I'm not a big hitter but I lose a ton of distance on it and am always comfortable with the hitting surfaces at Golfsmith. Thanks

Pleas help!!! I just set up the Optishot and realize I need a projector. I need to keep the price of the projector under $425. I'm Canadian from Montreal but now live in Texas. Any help is greatly appreciated. Thanks!

Hi everybody. I'm hoping there's an owner of the original Accusport Vector (model SVS 150) who can help me out. I just bought one and unfortunately it didn't come with an AC adapter, so I need to buy a replacement. The problem I have is that the polarity info for the adapter is not printed on the...

Does anyone have ever a good solution for playing with both left and right hand players? Found this but it's too pricey going to try something similar Diy... http://www.customdesigngolf.com/portable_golf_simulators_and_launch_angle_devices_have_now_become_better_.htm

Hi there guys ... Need some help here... I have a Accusport Vector Pro launch monitor I like messing with to get some numbers and check out my clubs but would also like to look for something to do some simulation / closest to pin etc. I was thinking the Optishot 2 just as something to play...