+ Reply to Thread
Results 1 to 30 of 32
Thread: Pull out shafts
-
02-25-2006 02:15 PM #1
Pull out shafts
SOLD
The following will be available for a week or so. I would rather sell as a whole.
1)Cleveland launcher bi-matrix driver shaft stiff .335 (could also be used in a 3 or 5 wood ) $10.00Sold
2)Cleveland launcher gold 4 wood graphite shaft stiff.335 tip(could aslo be used in a 5 wood) $10.00 Sold
3)YS-6 MSI 70 s fLEX .350 TIP Driver shaft [B][I]SOLD
4) Taylor made MAS Regular Flex .350 tip driver shaft $10.Sold
5) True Temper Dynamic Gold S300 Driver shaft .335 tip(can also be used in a 3w or 5 wood) $8.Still available
6)True Temper tx 90 DRIVER SHAFT .335 TIP $10.[B]SOLDLast edited by Chieflongtee; 03-29-2006 at 06:31 AM.
Live as if you were to die tomorrow. Learn as if you were to live forever.
Mahatma Gandhi
-
02-25-2006 02:20 PM #2
does the bimatrix have the cleveland graphics or bimatrix graphics
-
02-25-2006 02:26 PM #3
cleveland graphics
Live as if you were to die tomorrow. Learn as if you were to live forever.
Mahatma Gandhi
-
02-25-2006 03:10 PM #4Originally Posted by davevandykLive as if you were to die tomorrow. Learn as if you were to live forever.
Mahatma Gandhi
-
02-25-2006 11:48 PM #5
What is the length of the bimatrix, and would you sell it alone, say for $10? I might be interested
-
02-26-2006 08:48 AM #6
The bimatrix is 41 7/8. Will play in the 43 43.5 range depending on hosel depth. For the time being I don't want to sell it separately.
Live as if you were to die tomorrow. Learn as if you were to live forever.
Mahatma Gandhi
-
02-26-2006 01:08 PM #7
-
02-26-2006 01:51 PM #8Originally Posted by GarthM
Ok $12 band it's yoursLive as if you were to die tomorrow. Learn as if you were to live forever.
Mahatma Gandhi
-
02-26-2006 01:52 PM #9Originally Posted by davevandykLive as if you were to die tomorrow. Learn as if you were to live forever.
Mahatma Gandhi
-
03-14-2006 09:20 AM #10
all off to ebay. http://cgi.ebay.ca/ws/eBayISAPI.dll?...ME:L:LCA:CA:11
Last edited by Chieflongtee; 03-14-2006 at 03:44 PM.
Live as if you were to die tomorrow. Learn as if you were to live forever.
Mahatma Gandhi
-
03-14-2006 03:31 PM #11
- Join Date
- Jun 2003
- Posts
- 470
chief
You have not sold my shaft
-
03-22-2006 11:15 PM #12
- Join Date
- Mar 2006
- Location
- Barrie
- Posts
- 25
Any shafts still available or are they sold?
-
03-23-2006 05:42 AM #13
These are still available. everything else is sold.
5) True Temper Dynamic Gold S300 Driver shaft .335 tip(can also be used in a 3w or 5 wood) $8.
6)True Temper tx 90 DRIVER SHAFT .335 TIP $10.
__________________can also be used in a 3w or 5 woodLast edited by Chieflongtee; 03-23-2006 at 08:47 AM.
Live as if you were to die tomorrow. Learn as if you were to live forever.
Mahatma Gandhi
-
03-23-2006 10:02 AM #14
- Join Date
- Mar 2006
- Location
- Barrie
- Posts
- 25
Thanks for the response Chief. I was hoping for the Taylor made MAS Regular Flex .350 tip...
Golf related stuff is addictive.
-
03-23-2006 10:22 AM #15
- Join Date
- Feb 2005
- Location
- Forever stuck between single digit and trunk slammer!
- Posts
- 16,809
solo, if Chief doesn't have one I might have a TM MAS reg. I'll check tonight when I get home.
"A life lived in fear of the new and the untried is not a life lived to its fullest." M.Pare 10/09/08
-
03-23-2006 10:39 AM #16
Chief, what is the flex for the TX-90 driver shaft?
[COLOR=green][B]Golf is a game invented by the same people who think music comes out of bagpipes.[/B][/COLOR]
-
03-23-2006 03:55 PM #17Originally Posted by Geoff JohnstonLive as if you were to die tomorrow. Learn as if you were to live forever.
Mahatma Gandhi
-
03-23-2006 03:57 PM #18
- Join Date
- Feb 2005
- Location
- Forever stuck between single digit and trunk slammer!
- Posts
- 16,809
I don't remember owning a driver with a TX shaft in it. What did it come out of? Or is this just another one of those sick club ho jokes?!?!?
"A life lived in fear of the new and the untried is not a life lived to its fullest." M.Pare 10/09/08
-
03-23-2006 04:00 PM #19Originally Posted by Geoff JohnstonLive as if you were to die tomorrow. Learn as if you were to live forever.
Mahatma Gandhi
-
03-23-2006 04:02 PM #20
- Join Date
- Feb 2005
- Location
- Forever stuck between single digit and trunk slammer!
- Posts
- 16,809
I'm well aware of their playing characteristics, but I still don't remember owning a club that had that shaft in it.
"A life lived in fear of the new and the untried is not a life lived to its fullest." M.Pare 10/09/08
-
03-23-2006 04:06 PM #21Originally Posted by Geoff JohnstonLive as if you were to die tomorrow. Learn as if you were to live forever.
Mahatma Gandhi
-
03-23-2006 04:08 PM #22
- Join Date
- Feb 2005
- Location
- Forever stuck between single digit and trunk slammer!
- Posts
- 16,809
Now I remember, it was in that Cleveland 330 driver. Phew, I'm not losing it just yet.
"A life lived in fear of the new and the untried is not a life lived to its fullest." M.Pare 10/09/08
-
03-23-2006 04:10 PM #23Originally Posted by Geoff Johnston
Maybe you should go get checked![font=Impact]Dirty...Mean...And Mighty Unclean.[/font]
-
03-23-2006 04:11 PM #24
- Join Date
- Feb 2005
- Location
- Forever stuck between single digit and trunk slammer!
- Posts
- 16,809
Been checked, doc says there is no hope for me. I cannot be saved.
"A life lived in fear of the new and the untried is not a life lived to its fullest." M.Pare 10/09/08
-
03-23-2006 09:21 PM #25Originally Posted by Chieflongtee
BTW, I'll take the TX-90. I'm sure I could use at some point in time.[COLOR=green][B]Golf is a game invented by the same people who think music comes out of bagpipes.[/B][/COLOR]
-
03-23-2006 10:29 PM #26
- Join Date
- Mar 2006
- Location
- Barrie
- Posts
- 25
Originally Posted by Geoff Johnston
-
03-24-2006 07:58 AM #27
I have both MAS R and S , as well a Bi Matrix .350 in R flex, if no one else can help you out.
Originally Posted by randle_soloSome people are like Slinkies... they're really good for nothing, ... but they still bring a smile to your face when you push them down a flight of stairs...
-
03-24-2006 08:06 AM #28
Do you have 2 tappered spinners 6.5?
-
03-24-2006 08:18 AM #29Originally Posted by The Saint
Farzin is looking for a MAS regular Chris.Live as if you were to die tomorrow. Learn as if you were to live forever.
Mahatma Gandhi
-
03-24-2006 01:57 PM #30Originally Posted by The SaintSome people are like Slinkies... they're really good for nothing, ... but they still bring a smile to your face when you push them down a flight of stairs...
Thread Information
Users Browsing this Thread
There are currently 3 users browsing this thread. (0 members and 3 guests)
Similar Threads
-
One time pull DG-300 shafts with new decade grips
By Alain Robichaud in forum Components & ToolsReplies: 1Last Post: 04-05-2010, 08:34 PM -
Pull out shafts in mint condition.
By Chieflongtee in forum Components & ToolsReplies: 4Last Post: 05-09-2008, 06:40 PM -
Pull out Wedge Shafts-Graphite
By John in forum Components & ToolsReplies: 0Last Post: 03-24-2006, 03:23 PM -
Pull out shafts (low price)
By Jeany in forum Other Golf AdsReplies: 8Last Post: 07-05-2004, 05:12 PM -
Pull Out Shafts
By wopstergolf in forum Other Golf AdsReplies: 7Last Post: 05-19-2004, 10:38 AM