Looking for machine shop guy

[bobbyc]

need someone locally with good drill press (or whatever tools) to drill out putter hosel without breaking hosel. there is some jammed broken metal inside. not much thickness to work with. my tungsten drill bits and CT drill press wont do the job. reasonably priced hopefully. lmk
Bob

[Chieflongtee]

Have you tried a reaming bit Bobby?

Or this? Wear protective glasses and gloves

https://www.youtube.com/watch?v=wDLnGKSbYhk

https://www.youtube.com/watch?v=elQK0Srkmp0

https://www.youtube.com/watch?v=OfaZJyoisIc

https://www.hirekogolf.com/removing-...with-the-hosel

[bobbyc]

Thanks for your reply Its not a broken shaft. Wish it was that easy !!
I'll post some pics soon of the issue.
Bob

[bobbyc]

See attachments .... inside of hosel has to be drilled out straight down to the bend so that a new 2-3" pin can be inserted to hold the 'over the hosel' shaft ..... the hosel has partly broken original pin, some epoxy and broken drill bit in it .... my tools wont do the job !!!

[Wilster]

You need a carbide rotary file with an end cut and lots of cutting oil .
Its fairly easy to do with basic tools and a bit of patience .
A die grinder will also work , but if you can , heat up the epoxy and get rid of that first , its fumes are toxic and you dont want to be breathing that in if you are cutting , good luck

[bobbyc]

Thnx ...... will look into it and try almost anything ..... open for suggestions ..... this isn't the end of the world to fix but .... would like to

[bobbyc]

Thanks for all the suggestions ..... posted and PM'd ..... looks like I may have it resolved