ProTee Golf Simulator

[bubba22]

Tharn you can change the graphics in th ProTee Play. Options, graphics, try min settings.

[THARN]

I do- ever since I added the computer player- it maxed out the settings (when it loads the courses) for some reason-
the pro tee play settings are set at minimum-

[bubba22]

Does it happen as well when you play without a computer opponent?

[THARN]

Yes- I didnt realize it at first- but I added a computer golfer last night- and the game turned into a crawl for fps-
so i shut it down - restarted the comp and went back to the range to test the cameras and sensors more-
then today I tweaked the settings file and adjusted cams -hit balls at the range- then i loaded a course at minimum settings.
I can tell its loading higher setting cause it takes alot longer to load the course then it did the first times I loaded em to look at fly overs-
and I can also tell the graphics are high- because Bloom is (on) I never turned Bloom on- dont get me wrong the course looks great-
I just cant play it set this high- pro tee play graphics settings have not changed in the graphics settings section-
thats why i think i should just uninstall and re install-

[ZMax]

Have you upgraded to the latest nvidia driver? I think my first Protee sim computer was an AMD dual core with a GTS250. I upgraded to a quad very quickly if I recall.

You changed the graphics settings to minimum but they revert back to maximum the next time you go in to check?

[THARN]

No- the graphics settings dont change in the game options-(what I select stays there) but when i load a course- I can clearly tell that it is loading very high to max settings.
I put this comp back together and reinstalled all hardware and drivers(including latest nvidia drivers)- runs fine- actually ran pro tee at medium settings at around 25 fps(which isnt bad at all) But now i cant get it to load the settings i want-

its not a big deal to un install and reinstall- now that i know how things go-

[ZMax]

Tharn, I highly recommend you upgrade your computer. If your computer starts to slow down, while online, you'll slow everybody else down. An could even crash the online session.

[THARN]

I wouldnt play online with a dud- i know what it can do to everyones fun-
Im looking at options for a new build-
anyway I reinstalled and re did everything just to make sure- and its the weirdest thing- I started the pro tee portal up loaded a course-
it was fine- smooth - exited out- and re checked the cameras because I wanted to hit some shots..
restarted portal- loaded augusta- and it was running laggy again...I went to hole 12 to hit some shots anyway-
the first shot was low fps-
then everything was running fine- i went to about 4 different holes and hit shots and putted around- flybys too- it was smooth as silk.
i dont get it--- still going to get an upgrade- but at least i can play and get things tweaked for now. and give s me time to get the best bang for the buck- in specs.

question about Augusta- are there no other tees than tourney?

[ZMax]

question about Augusta- are there no other tees than tourney?

Not with this version. There's an updated version that has shorter tees. We'll try to push for that for the next batch.

[THARN]

good-- lol- I certainly dont have the distance I used too-and boy thats some length there,

[ZMax]

Yeah, we used that course for our Masters Tournament last Winter and everybody got their asses kicked. I think I shot 28 over par in one of the rounds.

[Baller]

My camera setting change while I'm playing! I notice shots start to not read correctly, and then I go look and my Hcam FPS went from 48 to 60. Thoughts? Actually, the portal won't even load my cam setting correctly. It's saved at set at 48, then I go into the portal and portal will show 51.

With everything closed, I go into Flycap and recall my settings. Then, open the interface.

Somethings else I should be doing?

In the portal, when I exit a game, it does not always prompt me to save it. What can I do? Is there a save menu? (forgot to look)

[Baller]

I updated firmware and played the rest of my round (9 holes). Settings stayed the same, so never mind. Hopefully the firmware took care of the issue.

Also noticed that these Almost Golf balls are ruining my game. Can't get enough feedback. Wife's going to love my dent in the ceiling from my high lob shot... oops! I may have to put something there after all.

Fun to play this when it works... Now I need to try a round without the mulligans.

[ZMax]

I agree. I stopped using Almost Golf balls a while ago. I hated hitting wedge shots with them.

[craig118]

Really liking new courses and Interface, except my draw seems excessive. Anyone else that draws the ball notice this?

[craig118]

Your probably right psace. I think I developed some bad swing tendencies while hitting hundreds of drivers trying to tune my h cam. Will have to work on fundamentals again.. Time to dig out my Tom Watson dvd.

[bubba22]

So your rough penalties are not working?

[ZMax]

http://forum.OttawaGolf.com/showthre...393#post495393

This Winters first online tournament. Who's in?

[THARN]

I moved the stance mat about 4 inches closer -so i had to reset the hcam and v cam- played 3 holes at 'The manor-
I am really timid hitting the driver- and it shows-- but over all things seem to be working- since I reset everything-I havent had time to go in and change the settings yet in the settings file- I hope it does something to long pitch shots- cause right now I think they go too far-
the ball never stops rolling when it hits the green it seems-

in the interface- what is offset for?

[ZMax]

Pitching is fixed with the new settings. Offset is the amount of ball/ club /Grey stuff that you want in the capture.

[bubba22]

Tiger and ProTee. http://sg.sports.yahoo.com/photos/ti...923--golf.html

[THARN]

Im not sure if they are doing this on purpose these days but the turf on my sensor mat has been trimmed quite a bit- and there isnt much
just behind the ball- there is actually a hole there right in the center between the sensors that they didnt put a tuft of turf in - and its uneven- looks nothing like the pictures.

[bubba22]

Im not sure if they are doing this on purpose these days but the turf on my sensor mat has been trimmed quite a bit- and there isnt much
just behind the ball- there is actually a hole there right in the center between the sensors that they didnt put a tuft of turf in - and its uneven- looks nothing like the pictures.

Tharn are you referring to the reset sensor? Post a picture!

[ZMax]

Bubba22 discovered a problem with the Short Rough at Ledge Rock. Short rough appears to be using green bunker penalties. They should be able to fix this in the interface.

[thelono]

Off topic but I've got a dead sensor on my clubhead path sensor bank. Machine is about a year old and likely under warranty but would hate to have to send it away for repairs. I thought someone mentioned before they replaced dead sensors. Anyone know where to get them?

[bubba22]

Sure it's not just debris?

[thelono]

Sure it's not just debris?

No. You can actually tell it looks dead. The tiny shinny ball is kind of grayish. I tied cleaning but the debug show sensors screen shows this sensor as activated. I disabled the sensor and the club readings seem fine.

[ZMax]

Stuck red sensor? Have you tried compress air in a can? Don't use a towel or q-tip.

[thelono]

Yes it's stuck. I tried air. The small plastic part that hold the tiny silver ball looks damaged as well. Not sure what happened.

[jhp016s]

If its not debris, and is a sensor, they may just send you a new unit. When i bought mine it initially was malfunctioning and they just sent me a new one. When i received it, i just packed up the old one in the same box and sent it back.