CorporateGolfXtra 2023
+ Reply to Thread
Results 1 to 15 of 15
  1. #1
    6 Iron Lucky is on a distinguished road
    Join Date
    Sep 2008
    Location
    Ottawa
    Posts
    82

    Rare iron shafts - Element 21 Scandium Shafts

    FOR SALE: ELEMENT 21 SCANDIUM SHAFTS

    These shafts are a very rare find. They're made of Scandium alloy, hence the 21st element. They came with a set of Miura irons I purchased second hand, and they were said to be a 150.00 per shaft charge?!

    These shafts were said to outperform just about everyone in distance and in accuracy, but they never made it to market, I believe because it was too expensive to manufacture. They're quite an interesting story. If you google them, you will find some interesting reads. Here's some examples:

    http://www.marketwire.com/press-rele...bjq-818167.htm

    http://www.worldgolf.com/newswire/br...he-competition

    http://www.golfwrx.com/forums/topic/...from-e21-golf/

    http://www.swingexpert.com/pdf/SCAND...20GEOMETRY.pdf

    http://www.youtube.com/watch?v=d_gf-7xJi-Q


    I think the shafts are cut-down 1/4 inch from standard, but am not 100% sure...I could measure them if interested.

    They were sold to me as "stiff".

    The shafts and the grips on them are in great shape.

    4-PW

    125.00
    Attached Images
    Last edited by Lucky; 07-08-2013 at 06:07 PM.

  2. #2
    Im a fixture here Leftymoose is on a distinguished road Leftymoose's Avatar
    Join Date
    Aug 2012
    Location
    Kanata
    Posts
    1,257
    Flex?
    I like to call it a power fade

  3. #3
    6 Iron Lucky is on a distinguished road
    Join Date
    Sep 2008
    Location
    Ottawa
    Posts
    82
    They were sold as "stiff".

  4. #4
    6 Iron Lucky is on a distinguished road
    Join Date
    Sep 2008
    Location
    Ottawa
    Posts
    82
    Bump - $100 ???

  5. #5
    Moderator Big Johnny69 is on a distinguished road Big Johnny69's Avatar
    Join Date
    Feb 2005
    Location
    Forever stuck between single digit and trunk slammer!
    Posts
    16,809
    Tip size?
    "A life lived in fear of the new and the untried is not a life lived to its fullest." M.Pare 10/09/08

  6. #6
    6 Iron Lucky is on a distinguished road
    Join Date
    Sep 2008
    Location
    Ottawa
    Posts
    82
    Not sure. He had some Nippon 850GH shafts put in the Muira irons that had these shafts in them originally...and I think the 850GH shafts were in his Tour Preferred TM heads previously. So I think that would mean they were ok for .355 tip, but I don't have the tool to check.

  7. #7
    6 Iron Lucky is on a distinguished road
    Join Date
    Sep 2008
    Location
    Ottawa
    Posts
    82
    Offers?

  8. #8
    Scratch Player kilmidyke is on a distinguished road kilmidyke's Avatar
    Join Date
    Mar 2008
    Location
    Grange over Sands, Cumbria, UK
    Posts
    708
    Dont suppose you'll be heading down the 401 past Kingston/Napanee anytime soon?
    If you are, i'd like to work out a deal with you for these shafts.
    Drop me a pm if you're heading this way.

    Cheers,
    Liam.

    PM sent also.
    Last edited by kilmidyke; 07-21-2013 at 11:04 PM. Reason: pm sent

  9. #9
    Shagging Balls MattKanata is on a distinguished road MattKanata's Avatar
    Join Date
    Mar 2010
    Location
    Stittsville
    Posts
    442
    Do you still have the shafts? If you have the tip, it would be great
    PM me

  10. #10
    Arrow shooter Chieflongtee is on a distinguished road Chieflongtee's Avatar
    Join Date
    Jan 2002
    Location
    Golf Forums
    Posts
    7,985
    http://www.swingexpert.com/pdf/SCAND...20GEOMETRY.pdf

    And for the first time in history
    we can have the same shaft used in either parallel
    hosel heads or a tapper tip heads. This can only

    be done because of the unique features of Scandium by lightly belt sanding
    the outside diameter
    of the tip after trimming or by using an end finisher in our OEM factory.
    Live as if you were to die tomorrow. Learn as if you were to live forever.
    Mahatma Gandhi

  11. #11
    6 Iron Lucky is on a distinguished road
    Join Date
    Sep 2008
    Location
    Ottawa
    Posts
    82
    cool read...lots of technology in these shaft. Thx.

    I still have them, not sure about tip size though, sorry. They had Miura heads on them, and I believe they're .355.

  12. #12
    Putter jdz240 is on a distinguished road
    Join Date
    Feb 2017
    Location
    Oregon
    Posts
    2
    If you still have the e21 scandium shafts I am an interested and committed buyer.

  13. #13
    6 Iron Lucky is on a distinguished road
    Join Date
    Sep 2008
    Location
    Ottawa
    Posts
    82
    Still have them, but they're packed away and will not be coming out until the spring when I pack-up about 100 boxes and move. I have a whole bunch of golf stuff to get rid of. I plan on doing that work during the kids March break (mid-March). I'll look to post stuff then.

  14. #14
    Putter jdz240 is on a distinguished road
    Join Date
    Feb 2017
    Location
    Oregon
    Posts
    2
    Hi Lucky, Thank you for the quick response. I would like to make a commitment to purchase the e21 Scandium shafts. Having moved in the last year as well I completely understand how certain items are packed away and/or out of reach. I can send you 1/2 the payment now if you would like as to guarantee my commitment. Thanks Joe

  15. #15
    6 Iron Lucky is on a distinguished road
    Join Date
    Sep 2008
    Location
    Ottawa
    Posts
    82
    Hi Joe, Are you located in Ottawa or the US (Oregon)? I have some interest locally (Ottawa) and would prefer the simplicity of dealing with someone local. If you're not from here I can each out if the local interest does not buy.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Similar Threads

  1. Rare TT Black Gold 3-PW Reg Flex Iron Shafts
    By John in forum Components & Tools
    Replies: 3
    Last Post: 04-15-2013, 11:07 AM
  2. Element 21 iron shafts
    By alsclub in forum Components & Tools
    Replies: 4
    Last Post: 05-14-2011, 10:22 AM
  3. Element E21 Scandium shafts
    By sillywilly in forum Club Making & Components
    Replies: 5
    Last Post: 06-03-2009, 02:00 PM
  4. e21 Scandium Shafts
    By Supah in forum Golf Clubs
    Replies: 1
    Last Post: 05-04-2009, 11:32 PM
  5. Element 21 Driver... Scandium Technology.
    By No3Putts in forum Left Hand Clubs
    Replies: 3
    Last Post: 09-02-2008, 11:06 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts