+ Reply to Thread
Results 1 to 16 of 16
-
03-09-2013 07:30 PM #1
- Join Date
- Mar 2013
- Location
- oshawa
- Posts
- 29
Buy or make your own platform mat for opti shot?
Hi
I am in the process of trying to make my own golf simulator in the garage and was wondering what most people are doing for golf matts? Any input would be appreciated.
-
03-09-2013 09:09 PM #2
- Join Date
- May 2012
- Location
- Montreal
- Posts
- 62
Hey Slyder, I would make your own and save $ . There's a video on you tube from stickythings that shows them using a 4x5 insulation foam 2" thick under some plywood with a cutout for the opti. You could buy teeline turf for your top or some people use carpet. The other option is 2x4's (flat) with plywood on top. I strongly suggest you protect your optishot first but changing the thin original turf for a thicker one. I bought a 4X5 teeline turf pad and made cut outs for the sensors. It was from a place in Welland Ontairio.
-
03-10-2013 07:37 AM #3
- Join Date
- Mar 2013
- Location
- oshawa
- Posts
- 29
THANKS RIGGY
I am going to check out you tube.
-
03-10-2013 08:31 AM #4
Check local used adds. Can buy mats pretty cheap. Here are som eBay options.
http://www.ebay.ca/itm/PB4848-Backya...1#ht_850wt_689
http://www.ebay.ca/itm/PB4860-Backya...1#ht_850wt_689
http://www.ebay.ca/itm/TT3660-36-x-6...#ht_1389wt_960
-
03-10-2013 08:02 PM #5
- Join Date
- Mar 2013
- Location
- oshawa
- Posts
- 29
Thanks Bubba
I don't believe I would of ever thought of that.I will have to certainly check that angle out. Not to go to far off stream but I noticed
you had a few posts on screens as well. I was thinking of putting mine on a track that I could pull accross and attach it to the other wall with bungee cords when I want to use it and then push it back out of the way when it is not in use. I believe the thread had to do with the screen getting wrinkled . Do you see me having a problem using this kind of a system? Thanks again to you and all on this board, the wealth of information on this subjest is unbelieveable!
-
03-10-2013 08:41 PM #6
This may help with the screen http://www.youtube.com/watch?v=KQ_oU...KL5_Q&index=73
Also read this http://forum.ottawagolf.com/showthre...-Impact-Screen
-
03-11-2013 07:49 AM #7
- Join Date
- Mar 2013
- Location
- oshawa
- Posts
- 29
well it looks like back to the drawing board.Thanks for the input.
-
03-11-2013 02:53 PM #8
- Join Date
- Jan 2011
- Location
- VA
- Posts
- 41
I think bubba has provided you some good links. You can buy a mat made for the Optishot but you can just as easily cut out a rectangle instead and save yourself some bucks. I've seen people use plywood and etc to raise the height of their mat to level off the Optishot board. It's a cheap solution but I much rather use foam exercise mats. I would hate for the wood to warp and have a bounce or even clapping noise if I stand on it. The foam though varies in thickness from 1/4" all the way to 1". Just glue the golf mat you select to the foam mat(s) and you'll have a nice setup for a reasonable price. Since it's light weight, just hang it on the garage wall then it's not in use.
-
03-11-2013 04:41 PM #9
- Join Date
- Mar 2013
- Location
- oshawa
- Posts
- 29
That's a clever idea as well.Thanks
-
03-16-2013 11:13 PM #10
- Join Date
- Jun 2012
- Location
- Bay City
- Posts
- 11
I used allturfmats.com ultimate monster golf mat and jagmanjoe's optishot cover and it works great, as they are the same thickness.
-
04-01-2013 09:42 PM #11
- Join Date
- Apr 2013
- Location
- Annapolis, MD
- Posts
- 2
-
04-01-2013 09:50 PM #12
- Join Date
- Jun 2012
- Location
- Bay City
- Posts
- 11
Not the lite. It is 59.99 buy it now on eBay. I did cut it myself. Very easy with a sharp utility knife.
-
04-01-2013 10:00 PM #13
- Join Date
- Apr 2013
- Location
- Annapolis, MD
- Posts
- 2
Got it, thanks.
-
04-02-2013 04:40 PM #14
- Join Date
- Mar 2013
- Location
- oshawa
- Posts
- 29
Hi Azgdds,
what dimensions did you go with for the platfom?
-
04-14-2016 02:07 AM #15
- Join Date
- Apr 2016
- Location
- fgdfsg
- Posts
- 1
I did cut it myself. Very easy with a sharp utility knife?????
Get CodeLast edited by alstonamos; 12-14-2021 at 08:11 AM.
-
04-15-2016 03:25 AM #16
- Join Date
- Sep 2011
- Location
- Ruskin
- Posts
- 92
Thanks for the plug, Azgdds. I have also been hearing of customers using the All Turf Mats as well as foam mats and gluing turf to them. Just be sure you use something that does not let your feet sink into the surface too much. Otherwise, you will be finding your feet consistently below the ball.
Hope you are really enjoying the turf!
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Help Make a Child's Wish Come True! Make-A-Wish Eastern Ontario Golf Tournament
By Make-A-Wish in forum Local TournamentsReplies: 0Last Post: 06-26-2012, 11:49 AM -
How Did You Build Your Stance Mat/Platform?
By janton79 in forum Home Simulators - GeneralReplies: 0Last Post: 11-16-2011, 04:21 PM -
Hadwin has a shot to make Open history
By Kilroy in forum Tour TalkReplies: 0Last Post: 07-24-2011, 12:43 AM -
Golfer blew shot to let friend make nationals
By Kilroy in forum Tour TalkReplies: 12Last Post: 05-08-2010, 02:18 PM -
fujikura tour platform
By doglezard in forum Components & ToolsReplies: 2Last Post: 12-16-2007, 01:37 PM