screen installemnt..looking for opinions

[96p993]

I just got my screen from Cory, Ive been thinking of how Im going to install it on my frame. I have built a frame from 1" conduit and here is my thought.

TOP-sewing a pocket to slide the screen onto the conduit
BOTTOM-another pocket to slide another piece through. This piece will sit on the ground, it will give the needed weight.
SIDES-this is the interesting thought...I was thinking about making tight pockets on each side and running shock cord through them. This cord will be connected to the top and bottom of the frame. It should allow enough "bounce" in the screen while the top and bottom are the weight and and stability.

Does this make sense? It does in my head but thought I would ask for thoughts.

[CPA]

I would do conduit on side as well , would ne able to stretch screen from top to bottom to take out puckering.

See other screen threads about zig zag bungee.

Bubba, lot of screen questions lately. Need a sticky?

[96p993]

The screen is on a full conduit frame just that the sides are not connected to the frame itself...Im just trying to not use grommets anywhere on screen.

[CPA]

I would put side sewn in slot/pocket