+ Reply to Thread
Results 1 to 19 of 19
Thread: WebCam(s) for P3ProSwing
-
10-01-2010 11:27 PM #1
- Join Date
- Sep 2010
- Location
- Minneapolis, MN
- Posts
- 33
WebCam(s) for P3ProSwing
Hello,
What webcams are people using for the video capture? Specifically, I'm looking to do a 2 cam setup. No Launch Monitor package (yet), but if/when I do I guess I would be using 3 cams. Is that possible?
I know Bubba recommended the ps3 eye cam. Is that hard to get working on the PC (Windows 7 64 bit)? Do you know if it is possible to use 2 of them at the same time, or does that cause problems?
Thanks!
-
10-01-2010 11:40 PM #2
I also have the Logitech pro 9000 and the Logitech c510. Both cams work well. HD with 30 fps. Yes you can use multiple ps3eye cams. There are 2 windows drivers available for the ps3eye. One is for single cams and the other is for multiple cams. Bear in mind you can use any video capture device. The limitation is that of 30fps.
-
10-01-2010 11:45 PM #3
The ps3eye webcam is extremily easy to get working. It requires a windows driver that you can get from http://codelaboratories.com/downloads/ The SDK is for multiple cams whereas the first is for single cam only.
-
10-01-2010 11:59 PM #4
- Join Date
- Sep 2010
- Location
- Minneapolis, MN
- Posts
- 33
Which cams seem to work best for you Bubba?
-
10-02-2010 07:42 AM #5
I would say the ps3eye, pro 900 then the c510 in that order. I also use a digital camcorder as well. You have to play with the gain and exposure to get an optimal image at the 30 fps. Make sure you have good lighting as the more light the better. A workshop light will do the trick. The nice thing with the ps3eye cam is that it is cheap and the driver program allows you to select the 30 fps rate which automatically adjusts the gain and exposure. All you need to then is provide enough light.
-
10-04-2010 07:17 AM #6
- Join Date
- Mar 2010
- Location
- Peru
- Posts
- 97
Logitech
If you're going to use the Logitech webcams, you'll want to check out http://www.proswingsupport.com/Golf/...raSettings.php for help with the settings..
-
10-05-2010 11:27 AM #7
- Join Date
- Sep 2010
- Location
- Minneapolis, MN
- Posts
- 33
I have two of the ps3 eye cams coming from ebay for ~20 bucks each. My p3pro was shipped yesterday, along with the grass top and course package. My gaming laptop is ready to go. I have nets enroute, but I do have a tarp that will work until I figure out my exact space situation. BrushTee balls are enroute from Amazon.
I'm planning to start in my garage with the tarp and just use the laptop screen for now. When the nets arrive I'm going to play around with my basement to see if it works, although the ceiling is only 8 foot 9 inches. I have a flatter swing and can swing my driver without hitting anything, but I'm not sure it will work.
I'm still trying to figure out what I want to do about hitting mats. I currently have a regular hitting mat that I may build up with some of those foam interlocking mats and set it next to the p3pro. Eventually I will build something with a hole to lock it in place, as I know that is what many of you have done (for both the P3 and optishot). I will probably wait on that until I have a better idea of where I am going to use the unit the most--- garage (brr) or basement.
-
10-05-2010 07:16 PM #8
Diggler have you considered ordering a mat from the outlet store? Cheap and great quality. Check it out http://stores.ebay.com/P3ProSwing-Outlet-Store
-
10-05-2010 09:19 PM #9
- Join Date
- Sep 2010
- Location
- Minneapolis, MN
- Posts
- 33
Bubba- yes, I have looked at that option but with the grass top I would still have to build it up 1/2 inch (I believe).
-
10-05-2010 10:09 PM #10
All you then need is to place the may on top of interlocking mat with a hole cut out from where the sensor mat sits. This puts it at the exact height with the grass top. That is what I have and it works geat. The mats are very good quality and a good price. I originally made my mat but couldn't resist the deal on these mats. Also make sure you set the tee heights in the p3pro softwate to reflect the grass top.
-
10-05-2010 11:15 PM #11
- Join Date
- Sep 2010
- Location
- Minneapolis, MN
- Posts
- 33
Ya, maybe I will do that. From the looks of their outlet store on ebay, they don't have a full mat with the hole available... but I could put the larget mat with no hole along with the ambi mat.
-
10-07-2010 01:07 AM #12
You can easily cut out a spot for the sensor pad - the dual mat is the same material and size and the versa mat and it is pretty easy to cut - just an exacto knife, straight edge and measuring tape
-
10-07-2010 07:19 PM #13
-
10-11-2010 01:12 PM #14
Also just noticed about the 'build-up' for the grass top. I have clients who have built their own out of plywood or foam, or we also have foam pads cut specifically for that purpose
-
10-25-2010 08:59 AM #15
- Join Date
- Dec 2009
- Location
- Hollywood
- Posts
- 166
having hard time tracking club positions on mine. is it just me or is it the 30fps thing?
-
10-25-2010 11:59 AM #16
It is due to the low 30fps. For more club position you need more fps. Unfortunately the program is limited to 30fps.
-
11-21-2010 03:22 AM #17
- Join Date
- Oct 2010
- Location
- lake oswego
- Posts
- 16
cam you get enough light for the video to work and still have the p3pro sensor work?
Colin
-
11-21-2010 08:23 AM #18
Yes you can. More lighting is needed especially for the launch angle feature. More lighting for the video analysis as well is needed. The lighting should not interfere with he sensors if setup well.
-
11-22-2010 07:12 AM #19
- Join Date
- Mar 2010
- Location
- Peru
- Posts
- 97
Colin... Just be sure the light is not pointing down at the sensor unit. I recommend you have it close to the floor and pointing upward at the golfer. This will assure it does not interfere with the sensor.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
New p3proswing courses
By diggler in forum Home Simulators - GeneralReplies: 4Last Post: 10-04-2011, 12:09 AM -
p3proswing
By gregs63 in forum Other Golf AdsReplies: 0Last Post: 03-25-2011, 07:43 PM -
Used P3proswing
By Steveh in forum Home Simulators - GeneralReplies: 8Last Post: 10-28-2010, 07:03 PM -
Monitor, wireless keyboard/mouse, webcam
By spackler in forum Other StuffReplies: 0Last Post: 10-12-2010, 01:50 PM -
Pebble Beach Webcam
By fireice in forum Tour TalkReplies: 0Last Post: 02-05-2003, 08:36 AM