907D1 Head

[Hearzy]

I have noticed that the little piece of plastic on the head of my club is starting to raise up the shaft. Is this something to worry about? (Check pic)

The shaft is not coming out of the bottom of hte club nor does it look like it is moving around. But I dont want to do more damage if it is a easy fix (something that needs to be fixed)

Any ideas? Opinions?

[The Saint]

It's one of two things 1)ferrule creep.. it's quite common or 2) your head is coming off

1) For ferrule creep warm the ferrule and move it away from the hosel, clean and sand off any paint on the shaft where the ferrule meets the hosel. Apply epoxy and move the ferrule back to the proper position. Clean off any extra epoxy with a damp cloth.

2) Loose head, start by looking to see to see if the grip is still aligned with the head. If not, the head is probably loose. Try and twist the head and see if turns. You may have to clamp the shaft, be careful as you don't want to scratch the shaft. If the head is loose it'll have to be removed and re-glued.