Getting fitted poll

[Chieflongtee]

One local clubmaker here had a launch monitor session special before the holidays for $40. Granted it was not a full fitting session but a whole bunch of valuable information was handed out such as swing speed ,launch angle, face angle at impact etc.etc. That particular clubfitter was one of the kindest person I have ever met and was very generous of his time and knowledge and at no point did I feel that I was being taken to the cleaners.

[jonf]

How much do the actual adjustments cost? What does it cost to get the lie angles on all 8 irons changed? What about regripping a whole set with smaller or larger grips (that one is harder to answer, I know, but lets assume the grips are 3 dollars each). What about reducing the length of the iron shafts? I'd like to get a better idea for these things (to see if I can actually afford to do this). And of course, this assumes that my existing shafts are suitable for my swing and that I don't have to go out and replace everything.

[danscustom]

How much do the actual adjustments cost? What does it cost to get the lie angles on all 8 irons changed? What about regripping a whole set with smaller or larger grips (that one is harder to answer, I know, but lets assume the grips are 3 dollars each). What about reducing the length of the iron shafts? I'd like to get a better idea for these things (to see if I can actually afford to do this). And of course, this assumes that my existing shafts are suitable for my swing and that I don't have to go out and replace everything.

Loft and Lie angle changes are normally around $5 / club.
Shortening $5, Lenthen $8 Reshafts could be$15 - $40 + shaft cost depending on who does it?? Regripping $3-6 + grip?
These are just random examples without any fitting costs and are not the same depending on who does the work. Fitting prices can vary largely, where some will fit as part of the package, or just charge target rates.

[Chieflongtee]

How much do the actual adjustments cost? What does it cost to get the lie angles on all 8 irons changed? What about regripping a whole set with smaller or larger grips (that one is harder to answer, I know, but lets assume the grips are 3 dollars each). What about reducing the length of the iron shafts? I'd like to get a better idea for these things (to see if I can actually afford to do this). And of course, this assumes that my existing shafts are suitable for my swing and that I don't have to go out and replace everything.

IMO getting fitted will end up being cheaper in the long run than trial and error. I understand you being tight on a budget being a student. There are a couple things you can perform yourself for free though if you can't afford the full fitting process such as lie test,grip sizing and wrist to floor.Reshafting if needed to be done would be your biggest cost. Dancustom pretty much summed up the actual costs but you can easily learn to regrip your clubs or look for a 2 for 1 regripping sale and you can also shop around for these services.

[milner_7]

How much do the actual adjustments cost? What does it cost to get the lie angles on all 8 irons changed? What about regripping a whole set with smaller or larger grips (that one is harder to answer, I know, but lets assume the grips are 3 dollars each). What about reducing the length of the iron shafts? I'd like to get a better idea for these things (to see if I can actually afford to do this). And of course, this assumes that my existing shafts are suitable for my swing and that I don't have to go out and replace everything.

I just had my Nike Pro Combo's 3-pw done. They measured my WTF had my lie angle checked. It determined that I am 1/2" shorter than standard length and 1* flat. I had them do the changes and also check the lofts as well. The lofts were fine. Cost me $91.00 tax in. Great investment IMO. I play forged irons so bending them was not a problem. Oh yeah they saved the grips a well.

[Golfbum]

I played golf for 18 years before being fitted for irons.
Handicap dropped from 10 to 6 in the first summer I played with my new irons. I no longer had to compensate for iron shots that went to the right as I had irons with an upright lie.
Currently I play irons that are 2 up. I will check my lie this spring. I just check it myself now that I know what I am looking for. If I see any thing that looks off I will then check the lies of my irons.
I have never seriously done the launch monitor thing. I know I should and maybe this summer I will. I buy my clubs at a store that has an outdoor range. I prefer to see the actual ball flight outdoors rather than into a screen inside a store. Just my personal preference I guess. Old school maybe?
What makes me shake my head is this. Hardly any of the guys I golf with have been fitted for their clubs. The one guy other than myself who has been fit had his index drop dramatically after he got his new clubs. His big slice turned into a nice gentle fade, his iron shots were a lot tighter. He putted better too. Amazing what a good fitting can do for someones game!
For the amount one spends on clubs I can not see why you would not want to be sure those clubs fit your swing. At least get your lie angle checked. That is a simple process and is not costly at all. $20 is what I spent have my Wishons tweaked for the lie. Surely everyone can afford that.

[TourIQ]

What makes me shake my head is this. Hardly any of the guys I golf with have been fitted for their clubs. The one guy other than myself who has been fit had his index drop dramatically after he got his new clubs. His big slice turned into a nice gentle fade, his iron shots were a lot tighter. He putted better too. Amazing what a good fitting can do for someones game!

Hi Golfbum

When my son put together his dream set of custom fitted LH'ed sticks, in less than 4 months he shot a new course record '64' to a club that is 55-years old. Being a leftie he could never find the heads he really wanted to look at, at address. Then Mizuno made the MP-30's in LH and it was love at first sight. Of course we ripped the heads off of the new sticks just to get the heads and start all over building.

[Kiwi]

Three years ago I went to my first golf school. One of the pros suggested a club fit/launch monitor session in the spring just before I bought my new clubs. Up until then I was using my son's clubs, which were more up to date than my Golden Bear (1974) clubs. I tried a variety of club makes and settled on the TM R5 D driver with the stock stiff shaft. I had already set my mind on the TM RAC OS. The pro did the length, lie, grip measurements and I took them to a local retailer and had the clubs "custom" made. Just had my lie angle checked again this year at the school and they are still bang on. I suspect that once I'm due for another driver I will make some changes to the loft and shaft but for now they are good enough for me. It is hard to know what has caused my improvement, regular play, the coaching or the clubs but if nothing else it is comforting to know that the clubs I play with were created for me. For all the things we (forum members do) to try and improve, the cost of a fitting is a small amount with potentially a great return, in confidence, if not score... IMO

[Marcos]

I think if your swing is constant and you repeat it almost every swing that it is worth the money. I have been fitted for the first time this year and learned a lot about clubs if nothing else.The proof will be when i get out there and play a few rounds.

[Chieflongtee]

The only technology that has helped me was the R7 Bugsy bought me for Xmas a few years ago.

So it did work in a way. Have you tried offset fairway woods? Offset hybrids? An A flex shaft? I am not a golf instructor and I can't help you with the distance factor as I have never seen your swing. Could be many factors.

[Indio]

So it did work in a way. Have you tried offset fairway woods? Offset hybrids? An A flex shaft? I am not a golf instructor and I can't help you with the distance factor as I have never seen your swing. Could be many factors.

I do not slice my F/W woods or short Irons, just the driver. If I use the 3, 4 or 5 iron, they wil slice.

My swing isn't pretty but I scramble very well, good chip/pitch and good putter. I have a choppy down swing and usually a reverse pivot.... to try and get distance I try to swing harder which causes the chopping motion and reverse pivot.... I know all my problems (or most of them) I just can't fix them permanently, they keep on creeping back into my game

[jvincent]

WTF in golf fitting terminology is "wrist to floor".

Indio, the ball flight you describe with a driver is usually the result of hitting down on the driver causing excessive spin.

[Indio]

WTF in golf fitting terminology is "wrist to floor".

Indio, the ball flight you describe with a driver is usually the result of hitting down on the driver causing excessive spin.

Thanks.... I like my WTF better

Yes, I am told it is as a result of my 'chopping motion' which most call hitting down on the ball.

A club fitter and teacher would have a blast making me over.... I tried the lesson route a few years back with a very reputable pro in the area and I just got pissed at him cause he wanted me to have his swing and that was unrealistic since he was on the OVGA tour and playing well I may add. He wanted me to have a Freddy Couples type swing and wasn't concentrating on my faults (I think he was overwhelmed by the number of them!) He completely screwed up my scoring for about 2 years until I reverted back to my bad habits

[jvincent]

Yes, I am told it is as a result of my 'chopping motion' which most call hitting down on the ball.

A club fitter and teacher would have a blast making me over.... I tried the lesson route a few years back with a very reputable pro in the area and I just got pissed at him cause he wanted me to have his swing

This is what separates the good teachers from the bad ones. There are a lot of teachers who subscribe to the "one perfect swing" theory. If people all had the same body shape, strength, etc. this would make sense. But we don't, so it doesn't make any sense.

The key is to be able to get you to making a swing that is natural and repeatable for you.

[Gapwedge]

The key is to be able to get you to making a swing that is natural and repeatable for you.

This is of paramount importance.

Get comfortable in your own swing first. I started golf late in life (I was 35 the first time I touched a golf club). I stayed with used clubs and group lessons until I broke 100. I then went to (in my opinion) the best club fitter in town (Don Irving) for a full set of customs sticks.

I changed my woods (twice) as my swing speed increased (thanks to Marc Peterson) - mostly the shaft (flex and tip) and loft (from 12.5* to 9*). I also dropped the hybrids for the longer irons, as they had more flexibility.

In short: If you can break 100, you are ready for custom sticks. Spend the money to get great irons - the second shot has the greatest impact on the score. Wait until you break 90 before spending big $$ on the woods.
________
Daihatsu hijet

[Chieflongtee]

Couple liars on here. Nobody checked off the 2nd option. Iknow of one for sure unless he checked off in the future

[Chieflongtee]

Be nice

[Chieflongtee]

Yes, I am told it is as a result of my 'chopping motion' which most call hitting down on the ball.

How can someone with a reverse pivot hit down on the ball?

[The Saint]

This is what separates the good teachers from the bad ones. There are a lot of teachers who subscribe to the "one perfect swing" theory. If people all had the same body shape, strength, etc. this would make sense. But we don't, so it doesn't make any sense.

The key is to be able to get you to making a swing that is natural and repeatable for you.

John you are 100% on the money. I just wish I could repeat the good swing more often

[Weirfan]

I am a huge believer in being properly fit for everything including set make up...but I'll toss this out for discussion.

1. with the high handicapper and or beginner who cannot swing consistently from one swing to the next....are you really doing them a service with a detailed fitting for lie angles ?

2. people with excellent hand eye co-orrdination and athletic ability can adapt and play well with pretty much anything.....this is not about me but will use myself as an example, I am very athletic and play and have have played multiple sports......I am a 6 handicap and play custom fitted irons that are typically, -1/4 and 2* flat

However, in recent years I have shot rounds in the low 70's using my wifes off the shelf ladies irons ( c7, -1/2 and whippy flex) irons that were 2* up and 3/4 inches long and irons that were 3* up and 1/2 inch long........I have also witnessed a club pro shoot even par 72 using a set of 9 year olds clubs

[kerisb]

Hahaha I have read all the posts in this thread and am still confused as to which helps more, the lessons or the fitting. I can sympatize with Indio as I seem to have alot of the same problems. I am not a great distance hitter, and the harder I try to hit the ball the more wrong it goes. I have taken a few lessons, but as someone mentioned, I felt that I was being showed the way people should be swinging not the way that I could swing, and since I have back and neck problems some of the normal ways of swinging just don't work for me. I am not a great player but each year my scores come down, I have realized this year that maybe concentrating on my short game may put me to where I want to be more than trying to gain distance. I have never been fitted, but have used those stickers on my clubs that tell you where the ball hits the club and they seem to help. As far as more lessons, might consider them, but need a teacher that will watch what I do and help me with what I have , not drastically want to change everything I am doing. I think practising and is the best thing we can do, whether we are playing with a custom set or a set we have adapted to. I do understand the theory of golf and the theory of how to do it all right, but the theory and practical are hard to put together as one!!!

[Big Johnny69]

I think page 93 of the February issue of Golf Magazine sums it up best. John Spelman, director of golf at Richland Country Club in Nashville and a former Ping Club Fitter of the Year said in reply to being asked if custom fitting a magic bullet:

"No, it's just another tool to try to improve ball flight. But I don't give a lesson without commenting on my student's clubs. Really, it's to the point where you can't custom fit without teaching and you can't teach without custom fitting."

And I agree, there really is no right or wrong answer as to how to approach this. They both go hand in hand.

[TourIQ]

However, in recent years I have shot rounds in the low 70's using my wifes off the shelf ladies irons ( c7, -1/2 and whippy flex) irons that were 2* up and 3/4 inches long and irons that were 3* up and 1/2 inch long........I have also witnessed a club pro shoot even par 72 using a set of 9 year olds clubs

I know you are a believer but let me add this ...

Clubs properly fit with progressive yardage gaps between each club will increase the probability of shooting low rounds. On 9 holes using just a single club [7-iron] my son has shot a '39'. Now with 13 more clubs he has shot '30' on several occasions. Even club pro's can shoot a low number but can they do it all the time?

A great set that performs for the golfer or pro will increase their probability of having a ton more birdie or par opportunities. Given enough games even a hacker can put together 1 decent round with ill fitted equipment, but s/he can't do it on a regular basis.

[Wknd_Warrior]

Never been fitted. Part of the reason is I just haven't seriously considerred bothering, the other part is I don't really have a grooved swing that unlikely to change a bit, so I don't see the point of getting my lie set to how I swing the day I step in front of the launch monitor.

I do get my clubs checked every year for lie. I had them set a little more upright than usual for most of last year which I've decided I don't like and have had them flattenned out a touch. I'm pretty much the exact opposite of what you should do lol.

[dbleber]

I know you're a proud father, but how about a post that doesn't start with my son shot...........my son uses............my son broke this record............ What do you shoot, what do you play?

[dbleber]

Your right Andre, I'm sorry. Sometimes I read stuff for so long that eventually I just spit stuff out.

[Bullet]

Question, I have some mid prce irons. They cost me under 300$ new. I play high 90's to low 100's. Should I wait till I get a better set of irons before I get them fitted? I'm upgrading my fairway woods aswell. Hoping to buy used yet recent Cobra's. Do I get them fitted too? My driver is a SZ440? Should I get it fitted before considering upgrading? In other words I 'm planning to purchase a totally new set of clubs, but not all at once. Do i wait to fit my new clubs or should I fit the ones I have now before investing more?

[danscustom]

If your going to play them, they need to fit you and you alone.

[semperfi45]

If your going to play them, they need to fit you and you alone.

I believe it makes some difference, just not sure how much. I still say it's the Indian not the arrow.

[davevandyk]

I believe it makes some difference, just not sure how much. I still say it's the Indian not the arrow.

it is the arrow, not the indian but how good is the indian when he is using a bent arrow? That's what you have if the clubs are not fitted for you. You are using clubs that are not made for you to golf with, they are made to a standard that nobody really is. You will notice a big difference, even if you are shooting 90-100's.