+ Reply to Thread
Results 1 to 13 of 13
Thread: Lie Angles
-
09-23-2006 05:49 PM #1
Lie Angles
I am sure now that my lie angles on my Pings are a little off. The set needs to be adjusted 1* upright to blue dot specs. Where is the best, quickest, and reasonably priced place to get this done.
"Get your smile on!"
-
09-24-2006 07:58 AM #2
I had mine done by Don at artisan golf, he did a great job and the price reasonable.
http://www.artisangolfco.com/
Andy
-
09-24-2006 05:48 PM #3
I can bend them for you. How did you come to that conclusion?
Live as if you were to die tomorrow. Learn as if you were to live forever.
Mahatma Gandhi
-
09-24-2006 06:30 PM #4
I got fitted. Was suggested to use a reg. flex shaft. I had rifle 4.5 installed to standard lengths which are normally 1/2 inch longer than ping. So, my red dot ping eye2+ now being 1/2 inch longer should play to a black dot. According to static measurement I fall between black and blue dot on the scale. I taped them and each club is very close to right in the middle but the marks were a little towards the toe, more so with the eight iron. I never faded my previous set and they had both reg. flex and stiff flex in them at one time or another.
I'm nowhere near a club junkie, or even a novice clubmaker(I can change grips) but I do read...and everything is pointing to adjustment of lie angles.
Also, I just can't get it through my head how 1 degree can make such a big difference but right now my game is so poor with iron play that I am willing to try anything."Get your smile on!"
-
09-25-2006 08:23 PM #5Originally Posted by Chieflongtee[font=Impact]Dirty...Mean...And Mighty Unclean.[/font]
-
09-25-2006 08:29 PM #6Originally Posted by covanantLive as if you were to die tomorrow. Learn as if you were to live forever.
Mahatma Gandhi
-
09-25-2006 08:31 PM #7
Sweet...be seeing you soon
[font=Impact]Dirty...Mean...And Mighty Unclean.[/font]
-
09-25-2006 08:36 PM #8Originally Posted by Andy4ParLive as if you were to die tomorrow. Learn as if you were to live forever.
Mahatma Gandhi
-
09-25-2006 08:43 PM #9
Yes it is....unless I make minor adjustments.
"Get your smile on!"
-
09-25-2006 08:49 PM #10
What about the other irons?
Live as if you were to die tomorrow. Learn as if you were to live forever.
Mahatma Gandhi
-
09-25-2006 09:24 PM #11
normally straight....unless I make a bad swing
"Get your smile on!"
-
09-25-2006 09:43 PM #12
What kind of Pings. some older models are not bendable.
http://www.pinggolf.com/global_repair.htmlLast edited by Chieflongtee; 09-26-2006 at 06:37 AM.
Live as if you were to die tomorrow. Learn as if you were to live forever.
Mahatma Gandhi
-
09-26-2006 07:52 PM #13
- Join Date
- Dec 2005
- Location
- Stittsville
- Posts
- 1,512
What happened to Golfworks Andy ???
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Putter lie angles
By little brit in forum Club Making & ComponentsReplies: 1Last Post: 05-13-2006, 08:52 PM -
Divots and lie angles
By Chieflongtee in forum Club Making & ComponentsReplies: 2Last Post: 10-07-2005, 09:43 AM -
Wedges and Lie angles ?
By Longball in forum Club Making & ComponentsReplies: 6Last Post: 03-19-2005, 09:50 PM -
Wedges and Lie angles ?
By Longball in forum Golf ClubsReplies: 0Last Post: 03-08-2005, 10:23 PM -
Fairway wood lie angles.
By Andru in forum Club Making & ComponentsReplies: 4Last Post: 02-07-2005, 10:00 PM