+ Reply to Thread
Results 1 to 30 of 54
Thread: TaylorMade R7 460 9.5 Degree
-
08-24-2006 10:17 AM #1
TaylorMade R7 460 9.5 Degree
Hey all. Just want to see if there's any interest in this as i'm looking at grabbing something else. The title says it all, it's a TM R7 460 9.5 Degree with 14 and 2 Gram weights and i'll throw in the wrench as well. Comes with headcover too. Has been reshafted at Nevada Bob's with a big upgrade to an Accra SC75 M5. Kickass shaft!!! The club is in great shape. There are two tiny tiny little chips on the top line where it meets the clubface. I did a little work with the black sharpie just on the little spots and you can't see them unless you put the club right up to your face. Face and sole are in awesome shape. I'm looking for 270$ for this stick.
Last edited by John; 08-25-2006 at 08:33 PM.
-
08-24-2006 10:43 AM #2
I should add that the driver plays at 44.5 inches.
-
08-24-2006 10:45 AM #3
-
08-24-2006 10:50 AM #4
Most likely a Sasquatch Tour in 10.5 or a Bridgestone J33 460 in 10.5.
-
08-24-2006 11:06 AM #5
Didn't think I would see this go either.. John have you bumped your head?
Proud Member BigJohnnys Ryder Cup Team '08
All your base, are belong to us.
-
08-24-2006 11:15 AM #6Originally Posted by John
-
08-24-2006 11:22 AM #7
I really liked it i've just got the bug to try something different. It's actually the longest driver i've ever played. With that Accra it's a weapon. I wanted to try a higher loft as well to be honest. I've hit a couple this year over the 340 mark.
-
08-24-2006 11:28 AM #8Originally Posted by John
-
08-24-2006 11:29 AM #9
Thanks very much for the offer but i can't stand the look of Cobra drivers!!! The heads are just shaped so strangely.
-
08-24-2006 11:35 AM #10Originally Posted by John
-
08-24-2006 01:26 PM #11
One and only price drop down to 270$. This is a great for a current 2006 driver with a bigtime upgraded shaft.
Last edited by John; 08-25-2006 at 08:33 PM.
-
08-24-2006 04:15 PM #12
- Join Date
- Feb 2005
- Location
- Forever stuck between single digit and trunk slammer!
- Posts
- 16,809
Dude, I don't know what to say It is very rare that I get awe struck on the golf course. But that day at Sorcier in the rain, cold, windy conditions you put on the most impressive display of driving I've ever seen. Long and accurate with this thing. Can't believe you are looking to switch.
"A life lived in fear of the new and the untried is not a life lived to its fullest." M.Pare 10/09/08
-
08-24-2006 04:18 PM #13
I want it but your timing is always so balls!!!!
-
08-24-2006 04:33 PM #14
What can i say Geoff i've lost my confidence in her!! Edmontongolfer just take it, you know you want it!!!
-
08-24-2006 04:34 PM #15
- Join Date
- Feb 2005
- Location
- Forever stuck between single digit and trunk slammer!
- Posts
- 16,809
Originally Posted by John"A life lived in fear of the new and the untried is not a life lived to its fullest." M.Pare 10/09/08
-
08-24-2006 04:35 PM #16Originally Posted by John
My problem is that I already have 3 drivers. A fourth would be just horrible. Where were you when I was buying drivers before!!???
-
08-24-2006 04:39 PM #17
Aha, 200 definitely seems a little bit low. The shaft in this thing is worth 160$ alone baby!! One more driver isn't going to hurt ya, in fact it'll make you feel good!!
-
08-24-2006 04:40 PM #18Originally Posted by John
-
08-24-2006 04:53 PM #19
If that J33 R was 10.5 i'd ask for a trade but i want higher loft than 9.5. Think about it Edmonton you know where i'll be. Cheers man.
-
08-24-2006 05:45 PM #20Originally Posted by John
-
08-24-2006 06:57 PM #21
- Join Date
- Apr 2005
- Location
- Kanata
- Posts
- 455
Would you be will to trade for anything else????
-
08-24-2006 07:07 PM #22
- Join Date
- Feb 2005
- Location
- Forever stuck between single digit and trunk slammer!
- Posts
- 16,809
How much stuff do you have Thunder?
"A life lived in fear of the new and the untried is not a life lived to its fullest." M.Pare 10/09/08
-
08-24-2006 09:03 PM #23
The only other thing i'd be willing to trade for would be a 905R with an upgrade shaft in stiff or xflex.
-
08-24-2006 09:04 PM #24
- Join Date
- Apr 2005
- Location
- Kanata
- Posts
- 455
How about a brand new 906T with an NV stiff shaft 9.5 degrees
-
08-24-2006 09:07 PM #25
No sorry i'd have to pass on that but thanks!
-
08-24-2006 10:19 PM #26
What about splitting the head and shaft up. I am definitely not man enough for that shaft.
Proud member of the 2009 Ryder Cup winning team
-
08-24-2006 10:25 PM #27
PM me with an offer for the head but truthfully i'd prefer to keep them together.
-
08-24-2006 10:30 PM #28
Well then drop me a line as a last resort and I will make an offer on the head then. I have a couple of clubs I gotta move too.
Proud member of the 2009 Ryder Cup winning team
-
08-24-2006 10:34 PM #29
-
08-25-2006 11:23 AM #30
Final drop to 270$ or i'll just keep the damn thing!!
Last edited by John; 08-25-2006 at 08:33 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
R9 Taylormade 11.5 degree
By EagleSteve in forum Right Hand DriversReplies: 2Last Post: 01-18-2011, 08:27 PM -
taylormade r9 8.5 degree
By leapingtigr in forum Right Hand DriversReplies: 2Last Post: 10-11-2010, 07:57 PM -
Taylormade r7 460 11.5 degree with reg shaft
By EagleSteve in forum Right Hand DriversReplies: 7Last Post: 07-06-2009, 01:09 PM -
Taylormade R5 12 degree
By E Smith in forum Right Hand DriversReplies: 8Last Post: 06-11-2008, 05:51 PM -
TaylorMade V-Steel 15 degree
By Ginker in forum Right Hand WoodsReplies: 13Last Post: 04-08-2007, 01:23 AM