+ Reply to Thread
Results 1 to 5 of 5
Thread: DG iron shafts; which is right?
-
04-17-2006 12:59 PM #1
- Join Date
- Mar 2006
- Location
- Ottawa
- Posts
- 1,542
DG iron shafts; which is right?
What is the difference between DG S200 and DG S400 shafts? What should a high handicap 86ss 5 iron player use?
-
04-17-2006 02:23 PM #2
- Join Date
- Feb 2005
- Location
- Forever stuck between single digit and trunk slammer!
- Posts
- 16,809
The number following the S is for weight. A S200 shaft will be lighter than a S400. How much I don't know. Stick with the S200 or S300. S400 is pretty stout for only a "S" flex.
"A life lived in fear of the new and the untried is not a life lived to its fullest." M.Pare 10/09/08
-
04-18-2006 12:42 PM #3
- Join Date
- Mar 2006
- Location
- Ottawa
- Posts
- 1,542
DG iron shafts; which is right
Thanks for the info. It saved my from buying the wrong clubs.
Terrence
-
04-19-2006 02:29 PM #4
Dynamic Gold Flex differences
True Temper offers this definition.
Flex - the resistance of a shaft to bending as force is applied in the downswing. Generally, shaft flexes are denoted by the following letter codes: L (softest), A, R, S, and X (stiffest). Products in the True Temper “Gold” series are sub-flexed (ex. S200, S300, and S400) within each flex category.
Sub-flex – True Temper’s proprietary method of determining precise flexes within each individual flex category. This is accomplished by closely monitoring shaft weight, diameter, and wall thickness in design and manufacturing. As an example, Dynamic Gold S300 weighs 1/32 of an ounce or 2 grams less in overall weight than Dynamic Gold S400. This results in a shaft that plays slightly more flexible while remaining in the “S” flex category.
Hope this helpsSome people are like Slinkies... they're really good for nothing, ... but they still bring a smile to your face when you push them down a flight of stairs...
-
04-23-2006 02:04 PM #5
- Join Date
- Mar 2006
- Location
- Ottawa
- Posts
- 1,542
DG shafts
thanks saint
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Iron Shafts
By jsttaylor in forum Components & ToolsReplies: 6Last Post: 01-27-2012, 08:45 PM -
Iron shafts
By tob50 in forum Components & ToolsReplies: 0Last Post: 11-01-2011, 10:41 PM -
Iron Shafts
By LobWedge in forum Components & ToolsReplies: 3Last Post: 05-04-2011, 02:08 PM -
LF: Iron and Fwy Shafts
By Big Johnny69 in forum Components & ToolsReplies: 7Last Post: 10-08-2009, 12:19 PM -
FST 125 Iron Shafts
By John in forum Club Making & ComponentsReplies: 8Last Post: 02-17-2009, 02:44 PM