Forum: Golf Clubs

Get the most out of your driver: http://www.golfdigest.com/instruction/index.ssf?/instruction/gd200311loft.html :bmachineg

Through my company we are sponsoring 3 families for christmas. One of the families consists of a single mother, a son & a 12 year girl who wants to take up golf in the spring. If anyone knows of an inexpensive set of ladies clubs available please let me know. Also, does anyone know if Chuck...

I am in the market for some forged wedges. I have come down to 2 choices, Callaway forged wedge (56 and 60 degrees in vintage finish) and Cleveland 900 form forged wedges (also 56 and 60 degrees in gunmetal finish). They cost about the same and heck, even designed by the same guy. I've tried both...

Hello, I am in the market for a new putter (my current one's been beaten to death). I am curious what makes a good putter? I am looking at Scotty Cameron Newport 2 right now, but I dont know what justifies the price of the putter other than famous players using it. Anyone?

Rock Bottom Golf has a lot of new clubs for sale on eBay for pretty cheap. I'm eyeing some of the Adams Tight Lies they have up there... Anyone have any experience with this company? Also... any suggestions for fairway woods in terms of shaft flex and steel or graphite? ...

Im using this balls in the last 2 rounds and they feel Ok, Good distance and great feel on the greens (Good price too)

Where can i get an scorecard to keep track of my game on my computer (Shots, courses, statistics, rounds etc.)

Any comments on these clubs? At the time of posting the highest bid is only $20..... Would they be good for a beginner-intermediate player (shooting high 90s)? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3629031432&category=18966 -Rye

Hi everyone, I just went out and took a few shots with the Titleist DCI762B irons, and I was just wondering if anyone knows of any stores in the ottawa area that are selling them, and if anyone has seen them for under 1000$ (i'm in st. catherines for the time being and that's what they were selling...

Hi fellow golf addicts! This year I re-took up the game after a 4 year absense have become totally hooked, and I want to, at some point buy a new set of clubs. My question: what time of year is the best time to buy new clubs, i.e. when are the best money saving sales. I am looking to spend...

I have been reading a bit about club lie angle and have a question. If you buy a set of clubs, is it possible to have your lie angle determined and adjusted after you have bought them or do you have to be fitted before you buy them? This is probably a really dumb question but I have little...

I'm looking for some woods that will help me with my game from the fairway and I've heard a lot of good things about the Adams Tight Lies woods. I'll likely keep my eyes open for some good sales, maybe during the 'off-season'. Those who have had experience with these, any suggestions on...

I was just wondering what is a good beginner set of clubs? running anywhere from $250-$600

I have played with a set of ping zing 2 clubs this summer. I am consistently pulling my shots to the left. I just picked up a set of Titleist 981 used and would like some feedback on these clubs..any coments.

I have been playing for almost 4 years and during my first year, I bought a set of Northwestern irons from Sears. Not knowing if I would like this game or not. But I'm hooked, love the game and have fun playing it, most of the time. But now I have noticed that my 3 and 4 iron are 'caved in'. I...

I am demo-ing these two drivers over the next couple of days, but wanted some opinions on them. They both have stiff shafts and are basically identically sized heads (300 for Nike, 303 for Adams). Both are steel heads. After reading some reviews online, the concensus is that the Nike is a...

Which is the best driver on the market and why??? I don't have a driver so far because I'm using my 4 wood as a driver. I tried the cleveland launcher 400 but I'm waiting to try the 460. I tried the 580 from taylor made but it feels to light for me. I like to feel the head of the club just...

Hi All, Just wanted to know if anyone has Tommy Armour flow set, flow set meaning half the set consists of muscle back and cavity combined if so your opinion would be appreciated. Thx

Does anyone know where I can go to get a duplicate made of a current club that I own? It's actually my wife's driver. It's a ladies Yones ADX 12degree driver that she bought at SportsChek a few years ago. I went to GolfWorks at noon and they said they couldn't duplicate it because they didn't have...

:D Geez Ty. I never thought you were serious. http://www.zef.com/Gallery/Sports/Golf/airxtreme.htm :lol2

I bought a wilson harmonized putter on saturday and would like to get it reshafted with a belly shaft. I was wondering if anyone knew where I could get this done and how much it would cost approximately? ( what I mean is the very long putter with two parts, but i dont know if that is the correct...

Hi I was wondering if anyone has done some serious tinkering with custom shafts. I play a TM540 with stock shafts, and am wondering if a custom shaft like graffaloy, or bimetal matrix make a big difference? It is hard to test drive different shafts, thus the reason I am asking. Thanks.

Has anyone else found this driver to be unforgiving on off-centre ball contact? Please advise either way. If not, it could be that the shaft I'm using in it isn't suitable for me.

Golftown is running excellent sales now... If I had known my woods would have been almost half price, I might have waited until the end of the season!

I have anumber of iron sets and woods in that price range. Brand New, custom made. Give me a call if interested . Thx Steve

I'm looking to purchase a decent set for a friend who started playing golf. His budget is between $300-$500. Any recommendations? Any good brands that sell 1/2 sets? Thanks

I just had my irons regripped with GolfPride Player Sofftie Cords. I have played a few rounds with them and they are great. Thanks to the guy at Chuck Brown for recommending them. They are a little pricy but well worth it.

They have 52, 56 and 58 deg forged Tourney wedges. These are regular $189 on for $39. I saw the same one at Emerald Links 2 nights ago for $179. They had lots left at the Rideau Store.

Hey all, I'd like to get your help/opinion in selecting a new 3 wood as I've just sold my old one (with the help of this site!). With so many options out there, it's pretty tough to try them all, so I want to narrow it down to about three to demo. Would appreciate your top 3 recommendations...

Most serious golfers replace their grips every year. From your experience with various manufacturers, which have you found to give you most bang for your $ in terms of comfort and durablity?

I've just recently discovered the joys of hitting fairway woods. I can hit my 5 wood about 200-210. My 3 iron goes about 190 yards if I hit it right. That's a big "if". I guess a 7 wood would be a logical replacement for my 3 iron? Do you guys use one and if so, do they replace your 3 iron...

Where can i get a club refinished? I have a Vokey chrome sand wedge and have considered getting it refinished.

That beloved club of yours has dents, scratches etc.. and you'd like to keep it: check this out: http://www.customclubcoatings.com/ :)

Hi folks, I'm a rank beginer, having played for a little over a month (well, mostly hitting range balls :). I'm having a hard time dealing with the shock from the club hitting the ground or topping the ball, resulting in extremely sore muscles and joints. Is there any equipment out there that...

Hi guy's I've read great comments on the Bang Mellow Yellow driver and i was wondering if there is a place where they have them as demo? where i could it a couple of balls with?? I've been using the same driver for ever i hit it pretty well 220-240 almost always in the middle of the fairway...

Hi folks, Has anyone tried Golfworks DistanceMaster Logic Ballanced heads and/or DistanceMaster grafite shafts? They look like X-16 knockoffs. I'm considering getting a set and would like to hear some comments before I do. Thanks, Krolik

Hello All, Anybody have any suggestions for a replacement shaft for my ERC-II? I'm trying to look at all the options before I make up my mind. Any suggestions would be greatly appreciated! Thanks, Steve

Does anyone know of any reputable Canadian retailers who sell golf shafts? I have purchased from the Custom Club Shop before, but they do not carry the Fujikura shafts or the SK Fiber shafts. Any suggestions or links would be greatly appreciated. Thanks!

I was wondering how the swing weight units are working???? D2-D3-C9 What is the difference???? Thanks

Just curious if anyone out there has ever had the lie angle on their clubs adjusted in either direction and if they felt there was a significant improvement or increased sense of being in better positions throughout the swing because they were not compensating for lie angle that did not match their...

Any of you bought those or tried those. They seem really hot, might be worth investigating. If any of you have seen them or played them please let me know what you think of them and where and how much you paid for them. This week-end I am going to Mtl so I plan a visit to golf town to see if they...