Forum: Golf Clubs

Anyone have any experience with the Taylor Made "Monza" Style putters? I was sorta playing around with one at the shop yesterday as more of a joke, but found it very evenly weighted and had a great feel. Retails at 70 bucks, as a clone of the Taylor Made Moza, at that price, I might pick it up...

How do you know wether you need a stiff flex or regular flex in your woods (5,3,1 wood)? Is it just trial and error or is there specific things that decide what flex you should have? Thanks

Just watched one of those "paid advertisements" on the Golf Channel, in which they were selling the Lovett Wedge. Advertised as primarily a sand wedge, but also as a scoring club around the greens, it looked very good. Their scientific claim is that the rounded leading edge and back-set hozzle...

Anyone had a chance to try these balls out? I heard they're the best thing since sliced bread. rockford35

Let's pretend we have 2 driver heads with all the same specs except one has a 7* loft and the other one has a 10.5 loft. The 2 clubs have similar shafts but the 7* has a 48 inch shaft in it and the 10.5 has a 43 inch shaft in it. In your opinion which one will yield the highest launch angle?...

I'm 18, and when i started playing about 5 years ago i bought irons with graphite shafts, as i needed the extra power. I now find that my iron shots are all pulling to the left, although i have always had a slice (and still do with my woods :-) ). Is this a result of the shafts having too much...

I tried out the Callaway ERC Fusion driver at the gofl show this weekend and man is that club ever nice. It felt like I didn't hit one bad shot while I was using it. But it's pricy $700, at Chuck Brown's. I currently have a Titleist 975d 8.5 and am looking to switch drivers this summer. I also...

I have this set and they work great.. Obviously its more the golfer then the clubs but they do what i need them to do. Now yesterday i got into a discussion w/ a friend about golf clubs and i went online to try to find Fairways website. Well to my surprise they don't have one. I swear i have herd...

Consistency starts here: http://www.perfecttee.com/

No ego required....... ever seen el-Tigre hit the ball (I have), trust me 90% of us could use some air time... as an ex CPGA apprentice, and ProGolf employee. Just watch for the commissioned staff, pumping the 8* driver with the big comm. ;--) (all stores) GOLF DIGEST...... To achieve the...

I bought a new putter at the Golf show this weekend its the Precision II Saber the upper left on in this link New Putter It feels great, nice weight, great balance, and perfect swing.. I havn't had a chance to hit a ball with it yet, but i was wondering if anyone has herd of it or any review...

I'm looking for some information that actually shows different driver models and their associated distances. I think i'll be upgradign my 975D this year with something newer and hopefully longer. I've read abuot the new TaylorMade's and Cobras being pretty long, but cant seem to find any site that...

No ego required....... ever seen ***** hit the ball, trust me 90% of us could use some air time... To achieve the optimum distance-producing trajectory, even tour players have gone to higher lofts. For example, about half the pros recently teeing up TaylorMade drivers on tour used lofts of 9...

Cool stuff. http://www.equip2golf.com/newproducts/new_products_frameset.html?2004.html~newprods :cool

Does anyone have an idea of how good this driver and iron set is? Has anyone seem them yet?

For all those equipment nuts out there... Having returned from the PGA show in Orlando, I now have a true appreciation for the quality of the new Vulcan Golf equipment. GolfWeek magazine described Vulcan as the "surprise of the week" beating the major golf companies in sales during Golfest 2004....

Took some digging...Here's what I've found so far.

Well, here's a different take on the traditional golf "bag": http://www.aframegolf.com/launch.html Looks like an interesting concept. Not available in Canada yet.

Anyone using the check-go? http://www.golfclubreview.com/technasonic_check-go.htm

I had a bad day at the driving range. After hitting a bucket of balls. I noticed that the bottom of the head of my driver has two huge dents in it and the area connecting the face to the head is breaking apart. And now it makes a rattling noise. Does anyone know if this is covered under warranty by...

Hey take a loook at TM's new driver, the R7 :-) :) http://www.greatgolfdomain.com/forum/index.php?showtopic=734

:shake See if your driver is in the list. http://www.usga.org/test_center/COR/USGA_preamble.html

i have a bag mellw yellow driver with harrison striper shaft - i really like it. i want a three wood that has a consistently feel. i have a nice titleast 3-wood head that I like. Can i just buy the same harrsion shaft that's in my driver and put it in this 3-wood and expect the same type of feel?...

Just wondering if anyone has checked out the Yonex 260's & if they would be considered a reasonable game improvement set of irons? I'll be taking a set to the golf dome tomorrow to try, but any other info would be appreciated. Thanx...maak

Hi I'm looking for some advice. I'm looking to spend around 50-75 bucks (each) on a driver and a 3 wood. Does anybody know of any reasonably good clubs for this price. I'm a high handicapper and doubt that my swing is good enough for the expensive ones yet, but i'd like to get a good deal in...

I am considering getting a set of custom woods made 1-3-5-7 and have been told by a custom clubmaker in Dorion (near Mtl) that these are currently the best heads. He showed me an Alpha 830 and a Bang Yellow and also told me that the Harrison Striper was a top of the line shaft for these heads. ...

What a zoo that was!!! I arrived at the East End store 10 minutes before it opened and there wasn't a hope of getting into the parking lot. The west end store was even more nuts. Then headed downtown to the centre town store which was equally busy. Some great deals; the TM500 series drivers on...

Hi; My brother in law gave me his broken Calaway Great Big Bertha 2 driver for Christmas. He snapped the shaft, he wouldn't say how, and I had admired it when I played with him this fall. Anyway it has a RCH Pro Series 5.2, he loved the shaft, but he hits the ball 270-290 and I only hit...

Hi, I am looking into getting irons made by swing sinc and after reading a lot and talking to them it seems to make a lot of sense when they are talking about the "SINGLE FREQUENCY MATCH". What I am looking for here is info from anyone who had it done by them and what it changed in their game. I...

Hey guys I was at Chuck Browns the other day look at dirvers. I was looking at the Taylor Made TP with the Fujikura 757 Speeder, and a Titleist 983 K with the stock Speeder made for titleist by Fujikura. I asked the guy what the difference was between the shafts. He wasn't sure so he called down...

In the past, some posters have mentioned that they own the Tom Watson wedge set (52/56/60). Are they available in any local (Ottawa/Hull) stores or did you buy them online? Thanks

Rather than comment on the following post in the CB sale thread, I hope that it is acceptable to continue this topic under a new heading. Yes the TM drivers on sale at Chucks were non-conforming due to the COR. They actually had a sticker on them that said they were R&A conforming, but USGA...

Pageman and maybe a few others, object to those of us who do a little club making, knocking some of the OEM’s because of the poor assembly of their clubs. Perhaps they feel that if the clubs have a name brand attached to them, that the product is superior to anything that may have the term...

Now that we know what sticks many of you play (http://www.ottawagolf.com/forum/showthread.php?t=2448), what else do you carry along with you that makes your bag unique? Coins, food, lucky charms (not the cereal I hope), headcovers, etc. What are your "creature comforts" when you're out on the...

Hey all, i'm interested in getting a set of the KZG Blades not the ZO model but the regs. Anyone have any first hand experience with this brand of equipment. Please fill me in if you have anything to say. John

I'm looking for a good deal on some Grafalloy Blue graphite shafts with .350 tips. Anyone have any leads on where a guy might track some down? Any leads would be great. Thanks, rockford35

This is a question for those technical people out there. I had a 975D driver (9.5*) with the Graffalloy UltraLite Shaft Stiff shaft. I used to hit line drives with it but kept it in the fairway. I switched to a Adams 363GT (9*) with their stock Stiff shaft and now hit a very high ball with...

I am looking to replace my grips. Can anyone recommend someone or a retail outlet in Ottawa, to do the job? I am looking for A++ workmanship, timing, cost in that order. Any positive experiences or reviews would be appreciated. Please don't recommend CB"s, they put a black Winn grip on my...

This is probably the more appropriate location for this question... Does anyone have any experience playing these clubs? I'm in the market for a new set... Currently using an old Dunlop set of irons. I currently usually score just under 100 (or a few over on worse days). Would these be a good...

Hi folks, I'm looking to buy a new bag and would like to get something that would help organizing the clubs better. Right now I have a cheapo Canadian Tire bag that leaves my clubs all tangled up after a few holes, so ideally the new bag would have some sort of individual club compartaments. Any...

Hello, I am looking at Titleist 975 LF-E driver, but I am pretty sure there is an aillegal version of this club. Just by looking, I am unsure how to tell the difference: I was wondering if anyone knew how to differentiate the legal from the illegal version, or if I am wrong in my thought?...

Hey everyone, I am hitting a 975D, and I am happy with it...but it's starting to show some wear, and I'm always looking at different clubs/options; i enjoy some of the toys as much as the game itself, haha. I had the GBB Hawkeye, but didn't like it as muc. Just wondering if anyone has hit this...