Forum: Golf Clubs

Just in case you missed it... (drool bibs on please) ;) http://www.tmag.com/media/pressreleases/2005/092605_r7425.htm http://www.tmag.com/media/pressreleases/2005/092605_r7425tp.htm MSRP, $500 US ($1000 US for the tp) :eek:

Ok who has/had them and who likes them? I currently am using Deep Red Irons with FS. I am happy with them but am upgrading my irons and wondered what other members experiences are?

What products can I use safely on the graphite shaft of my new driver to remove the adhesive? There was a UPC sticker that I had removed....but it's adhesive remains. Tried using liquid dish detergent and warm water. Toothpaste didn't work either. Anything else? I don't want to damage the nice...

Has anyone here used a Daito putter? I've seen them at Chucks and GolfTown, and they seem to have a nice feel, especially the Stealth model which is very funky looking. Just wondering if anyone's used one extensively or owns one, it's hard to find a review... http://www.daitogolf.com/

Does anyone have any feedback on this hybrid. I see where Golftown has it in it's Christmas flyer this week with Aldila NV shaft for $159. I've read the reviews at Golfreview.com, and see where it's the # 1 hybrid on the Nationwide Tour and # 3 on the PGA Tour. Just looking for some OG feedback....

We don't often talk about this very important accesory, it's time to talk about it know. There are a lot of great brands for headcovers, Jplann animals, Winning edge mascots ( i love odie from garfield ) , and Rocket tour ( blue and gold for me (Boca Juniors fan )). Would you choose a...

Hey wondering if anyone has ever had a Custom putter from Tom Slighter made for them and what the cost was around. Also any feedback on these would be great! http://www.slightergolf.com/ Thanks Gropper

Anyone hitting an Ignote or FT-3?? Would like to hear your thoughts.. thnx

Without giving away my limited knowledge, in the most general terms possible, what should a taller golfer typically look for in lie angle? flatter or more upright?

Has anyone used this model? Or other comparable models?

Ok here goes.. Wondering some guys opinions... Let me be the first to say I don't like the look of irons covers.. However I am going to buy my first set of forged irons this off season and I am debating on using iron covers. I am a low handicap player. Personally I think iron covers look crappy. I...

Check this out at Crapy Tire, pretty cool. Of course if you're handy you could build your own. ...

I was wondering if anyone uses these iron holders that clip onto your bag and you clip your irons on it. Does it really prevent alot of bag wear on the irons or are iron covers just as effective? Thanks,

Hey guys, looking to get a buddy of mine a set of golf clubs (woods and irons included preferred) for Christmas. looking to spend about 300 to 500 before taxes. Just wondering what is a good set to get? He is a total beginner and wants to learn and get into the game? Any help would be great. ...

Anyone ever have any experience with these irons? Feedback is appreciated. Cheers

Just finished purchasing a whole new set of sticks for next season. Only thing left to buy is the new bag. I'm looking for a cart bag that will keep my clubs seperated (probably individual dividers) and easily accessible as I absolutely HATE fighting to get my club out or find the one I need. My...

Moving this information from another thread at the request of Geoff: leftycanuck<SCRIPT type=text/javascript> vbmenu_register("postmenu_71269", true); </SCRIPT> <SCRIPT type=text/javascript> vbmenu_register("postmenu_71269", true); </SCRIPT> > The vokeys are not forged. they are cast. I may...

Hey guys, In my never ending search for a putter i am looking for some advise as to what people like in the $100-$180 range as i have seem to find everything i like for my bag except a putter, Its not that i can't putt it just seems that i keep trying diffrent ones and going back to the cheap...

So I contacted Titleist customer service because the Titleist carry bag I had bought was missing the rain hood. I asked if I could buy a rainhood from them directly. In response they said they would send me a new rainhood for free! Sounds good until I read that they would only send me one if I...

Has anybody tried the Birdie Ball? Does it really work? www.birdieball.com

Looking for some input from my fellow members. I have a 10.5* Cleveland Comp head. I already have the Kevlar shaft and waiting on the Blue to arrive from Arizona. Was wondering what was everyone's expreriences with these two shafts. In a bit of dilemna as to which one to put in. Just a little...

Hello to all!! Could you please tell me about your golf clubs...what kind they are...where you bought them...why you bought them...AND how they got fiitted to you to make you play better. I know of an individual who explained to me the "TRUE" custom fitting process and is unique in his...

Which of these shafts would best promote distance and a higher launch on an R7. Which in your opinion is the better shaft or value for the money seeing the NVS is muchmore expensive.

Hello All, Looking for wedge.. CG11 or Vokey Spin Milled.. which one will be better? also 56 or 58 or 60? feedback is much appreciated.. thanks,

Anyone try the online driver fitting at Taylormade website? Myself as a slicer,they tell me my best option would be a 10.5* r5 type n. wouldnt a higher loft in a draw be a better fit? Not interessted in the club,just thought the fitting section of the website was kind of neat.

Just wondered if anyone had a chance to demo these irons yet.. I am looking for new irons and these caught my eye.. Any reviews would be great.. Cheers!

What is everybody using? I am still in search for a golf shoe that lasts more then a season. I have Foot Joy Contours right now, they are super comfortable but they are falling apart after a season and a half of play. I had Nike's before these and they didn't make it to the end of there first...

Anyone know of a cart bag with full dividers that are not made of that dumb hanging material? Something that maybe has a solid or fixed divider from top to bottom?

Any way of finding the degree of bounce on a wedge if its not marked?

Meet the new Cobras. http://www.cobragolf.com/ X F M for different swing speeds.

Hey guys, I was into Golf Town this weekend past and was wondering if anybody saw the new Mizuno MX 500 driver? What a beautiful looking club! I havent been this impressed with the austhetics of a club for quite some time. I'm play a 983K with an Accra and really like it........wondering if...

Has anyone played with these? I am about a 9 handicap and have been playing with Tommy Armour 845 Silver Scotts for 8 or 9 years now. Although took a few years "off" in other words didnt play much, I got out over 30 times this summer and am looking to improve my approach game and thought some...

Emailed titleist today about the cost of installing an Aldila NV pink in my driver. There response was that the NV pink is not an approved shaft for the T. Why is the NV a stock option then? The obly difference between the green NV and the pink NV is the color... I will def. be emailing them back...

Just wondered if anyone here was man enought o install a NV pink in their driver? LOL I am going for it..

This info may be somewhere else but will Golfworks change the shaft in the T?? Thanks guys..

Does anyone know if Titleist is planning on bringing out anything new over the off season (besides the new 704 irons). I know Taylor made will be comming out with two new r7's. One a 420 model and a 460 model. I think they are both only having two movable weights but not 100% on that. Callaway has...

Looking to replace the shaft in my Cleveland Launcher Titanium 5 wood. Was wondering if anybody knows what the tip size for this head is and what is the bore depth? Looking to get a proper sized shaft and don't want any surprises for the club builder. Thanks in advance.

I am looking to replace my injured V-Steel 3 wood and was wondering if any of you golf brains could direct me as to the difference between these two Sonartec clubs. I am leaning toward the Nick price model. I just missed out on 1 on Golftown's ebaye site.

Anyone used this simulator? Seems like it might be alright for me since I dont have room for a net. http://www.austads.com/austads/product.asp?s_id=0&dept_id=3233&pf_id=PABBAAHOGNOEAKBH&ad_id=CJ&key_id=&PABBAAHOGNOEAKBH

Stumbled across these on the internet looks interesting. Was wondering if anyone had used one. http://www.reesoputters.com/home.html

Anyone know if this shaft would be good for fairway woods? I have a couple of TM V-steels I want to re-shaft and this shaft seems to be popular.

Anyone have anythign to say about these? A friend has some in Calgary and he's selling for 200$. WOrth a try?

Has anyone tried these, either the stainless or carbon steel models? At $33 each at CB thinking of picking some up.

Has anyone played with the Vokey Spin Milled Wedges? I was looking at buying a 60*. Do the milled grooves increase spin rate? Do the wedges tear layers of the ball off? What is the reason or benefit for us (non-professionals) to buy an oil-can as opposed to chrome / gunmetal? I am also...

With what parts would you put them together?

I have just started playing golf somewhat seriously this year... 30+ rounds if I'm not mistaken. I have been using my dad's old clubs, Wilson Pro Staff 2 I think that were bought new sometime in the eighties. They don't have a cavity back like most of the new clubs. Would purchasing newer clubs...

Anyone hit these? How would you compare them to Callaway X-14 s or similar irons. I am looking to work the irons more and thought this set would fit the bill. Thanks