Forum: Golf Clubs

I have the biggest two clubs CALLAWAY GOLF ever made . they came out in 1994 or 1995 , i have the driver GREAT BIG BERTHA TITANIUM 76 INCHES LONG and the 5 iron 67 INCHES LONG , they are made out of the same material as the clubs made for play but would be almost impossible to hit.i got these...

I'm trying to figure out the bag for the up-coming season and I'm looking for some opinions re: wedge set-up. My two primary sets of irons both have 47* PWs I currently have a traditional 52, 56 and 60 degree 4 wedge set-up but I'm thinking of going with a 52 58 this year to gain an extra FW or...

gave this a shot the other day(9.5* stiff shaft), and have to be honest and say i hate it. you wont hit the ball to either side, but it is an easy 40+ yards shorter then any club i would swing. i wish i was lying but it is just plain dead.

Starting the year I am thinking of puting as many as three hybrids in the bag. I am wondering how many hybrids you have in your bag and what your handicap is. My index is about 0.2 and I was wondering if other low hadicappers are playing a lot of hybrids too. Thanks.

Golftown now has a few Ft-9's in case anyone has been waiting to try it. All of the GT guys have been boasting about it for months.

I recently ordered a Long drive Driver from "All Out Golf". Kenny Lawson is the guy who runs this company (and Owner i beleive) and has a chatroom on his site to answer questions. This guy is top notch, and knows his stuff like no others do. He has a nice special on for "new guys" it was 195 plus...

I recieved a 7 wood as a gift, as I have never used a 7 wood I was curious as to the pros and cons of tjis club. regards fofs

Hi, Can any one tell me if it is worth the trip from Windsor to downtown Toronto for the golf show. I mostly interested in looking at equipment. are there sellers there from golf clubs or used equipment vendors? I go to the Detroit golf show every year and get some bargains. thanks

Rankmark just posted a new test result featuring fairway woods. I was wondering if anyone has seen the results of that test and their opinions of the results. I'm looking to remove my driver from my bag for a few rounds in an effort to lower my score (i'm a high handicapper), so I'm naturally...

I'm looking for a place where I can get a putter refinished. If any of you know a guy who you have found success with let me know. Thanks in advance, Brian

What's your AoA? I don't know mine. Do you know yours? http://www.trackmangolf.com/newsletter/jan08/AttackAngle.html <TABLE cellSpacing=0 cellPadding=0 width=800 border=0><TBODY><TR><TD vAlign=top height=958><TABLE cellSpacing=0 cellPadding=0 width="100%" border=0><TBODY><TR><TD vAlign=center...

Rankmark.com has recently released their test results for putters, irons, and drivers (www.rankmark.com). Do you guys agree with their conclusions? Its worth checking out as there are a few surprises in all the categories, especially putters.

I have a set of Tourstage Z101 irons, that I really love. The thing is that the 7 and PW are getting pretty worn. I was hoping to purchase just these heads to replace them, but I haven't had any luck locating just these. I guess the alternative is to have them refinished. Can anyone tell where a...

What is the difference between the grooves in the Titleist Vokey Spin Milled and the Cleveland CG12 with zip grooves??? Thanks

I know this thread happens from time to time on here, figured it might be fun to revisit the topic with local golf still a couple months away. The best club I've ever owned, or the club I liked the best is probably my Orlimar hip Ti 420 driver. It was the first good driver I ever owned, and is...

One of my playing buddies has a very restricted swing due to physical problems and as a result has a slow swing speed. He does not get his driver much past 185yds. His 3 wood however is just as long off the fairway. Each club has the same shaft so he wants to try the new Adams. It will be shafted...

I like seeing these threads elsewhere because so few people have what would be considered a "standard" complement of clubs - I walked behind a young-ish guy on Sunday who must have had 7 woods in his bag. That having been said, my clubs are pretty standard: Driver - Deep Red stiff 3w - Deep Red...

Wondering what features made you choose the range finder vs the GPS. Read previous threads on each but no real chat about pros/cons. Not that I am anti-technology but the Pinseeker seems to be the simplest to use, just point and click. Had a buddy buy a top of the line GPS last year on our MB...

Is it just me or is it extremely tough finding a hybrid that fits into the yardages of your irons. I have a nickent hybrid in my bag to replace my 3 iron, but I have come to the conclusion that I hit it way to far to be useful as a replacement 3 iron. I like it as a 2 iron. My other problem is...

Has anyone spent the money and tried a set of Pelz wedges?

I was just wondering what the marking was between a TM Tour Burner TP and just the Tour Burner itself? To Identify that it is a TP model? Is it just the little TP on the Crown of the head? Thanks.

I've been trying for a while and trying to match my swing speed and shaft flex. I know there's no standard shaft flex between companies so I know that a Stiff flex on an Aldila wont match a Stiff flex for a Fujikura. But if someone has some insight into these basic hypotheticals, it might help in a...

Well I have been browsing these forums for quite a few years and I notice the same people purchase and trade golf clubs on a regular basis. I am curious why this is the case here. I have been golfing for quite a few years (12 or so) and can count the sets of irons I have had through my tenure: ...

I got a TaylorMade Inza putter as a gift. Is it suppose to come with different weights?

I was at Golftown trying the SC Studio Select Newport 2.6 and notice a red dot behind the shaft on the putter head. I assume it was a type of reference point even though the sales guy told me it was just cosmetics :thumbsdow Anyway, it felt pretty good and easy to align. I know that SeeMore...

Does anyone know where I could find a Bang Pink SQUARE 460cc Beta Titanium Driver head in LH 18 degree ? thanks

I was looking at getting a Callaway Tour Blue putter, and was just wondering if anyone has ever used one, and how well you liked or disliked it?

whats the overall difference between the two? are the zb that much harder to hit?

Of course the Blades are only available in RH models.

Hey Guys, Been looking to pickup my girlfriend a set for beginner purposes, shes has a great on plain swing and can easily hit the ball 40 -50 yards in the air straight after 4-5 range sessions. Just curious what thoughts are out there on picking up a used demo set or beginner set for her? Ps....

liquidators in town and has all NF golf clubs hybrids all look like taylor made rescues and hogans, drivers are similiar to the taylor mades all have Apollo shafts which were made for NF lifetime warranty on all clubs all made in canada they look half decent anyone ever use or hear of them?

This pertains to the aquisition of equipment, so it's posted here. Anyways, when the biggest sale of the year? I was thinking of a boxing day trip but somebody mentioned november as well. Any insight would be appreciated. My bag is close to completion....

Two weeks, two drivers. 1st a Nike Sumo. 2nd a Ping G5 I'm 6'7", 260lbs and grip and rip but I'm a 11 handicapped golfer so it's not like I'm doing anything stupid. Any suggestions on a club head/shaft that suits a high club head speed/power hitter?

I have decided to get a set of golf clubs since all my friends play and im tired of using my dads. I was wondering what kind I should get. Any suggestions would be very helpful. Im about 5"8' 137 lbs if that matters at all. BTW Im only 16 so i dont have TONS of $$$ to spend on some clubs. Looking...

Hey guys I was thinking of buying an old set of Ben Hogan Channel Back irons, since they are really cheap. Just wondering if anyone has used them and if they are as good as other Hogan irons?

Anyone see the NEW Taylormade Burner Driver? I don't like the shape of it just from the picture of it. What do you think of it? Who owns one already?

i want to my my shaft feel a bit heavyer before i make the choice of switching to steel i was thinking about putting a strip of lead tap on the bottom of the shaft how far up and how much tho? i notice tiger had some one his about 6 inches up any thoughts?

Any recommendations on the best places to get fitting for PING irons in Ottawa area? PING website only lists two places (Hunt Club and Golftown), but I would have thought there must be more. Cheers, Mike

For all you Callaway fans out there, you should be aware that Golftown currently has the X-forged prototypes in the stores. These are the blades that Ernie and Phil are playing. I was window shopping at lunch and happened to notice them. They just arrived a couple of days ago according to the...

Check the putters out from this custom putter manufacturer. Neat looking putters and great prices; check out the gallery collection. http://ssbeachgolf.com/default.aspx

Anyone have any feedback?

I have narrow my search for a new driver down to these two, however I 'm stuck on deciding which one to buy. Any advice woiuld be greatly appreciated

Well... when it comes to electronics, I know what I am doing... when it comes to golf, apparently I have no freaking idea... I thought I was getting a #3 hybrid burner rescue... it is a gift... but it is a: TAYLORMADE BURNER RESCUE T3 TOUR LAUNCH 85G S FLEX I get home and read about the darn...

Ok as some of you may know I am looking at changing my computer room into a golf theme. I have collected quite a few items.....ok alot of items. However I have found out that I am now an ebay junkie:wallbash. Now with that said I have a liking it seems for old and unusual golf clubs, and a...