Forum: Golf Clubs

...

Anyone have any idea on why I am driving it so high? I would have thought w/ a stiff shaft, I would be driving it low if anything. But i usually am hitting about 240-260, but they are always high... The lie is 9.5* as well :-/. I dont understand. I was using a 10.5* reg flex before and I never...

So I was looking at this shaft today because I'm looking for a lower trajectory ball flight with less spin. I want to put it on my r7 425 which would be swapping my 65g regular stock shaft for a stiff 65g pro launch red. So basically I just wanted to know if this will help me get a bit lower...

so my cousin got a $400us gift card to use on bridge stone products, anything can be ordered if not in stock. Expires tomorrow. He is a lefty, 20hcp. What should be buy? I told him to get $400 worth of golf balls but he plays whatever he finds so he isn't big on golf balls. Anyway, anyone know...

Just tried some and I'm sold. Very nice looking at set up compared to my BB irons. Unfortunately went to try some MP 100's but didn't have any lefty in stock. Is it premature to be buying better irons now before my handicap lowers?

Going to be changing my grips on my irons. I know it's of player preference but what grips do you guys have?

What's the deal with these new scandium made shafts? Does anyone know anything about them? Are they rifle? Do they play like a steel or a graphite, lighter or heavier? Any info would help guys! Thx Supah

Hey Taking a few lessons this spring has shown me that I need to get away from my old Wilson Staffs and go to game improvement iron route. I'd like to find a set of game improvement irons with a thin top line. None of the current model year sets seem to have this. Does anyone know of any...

What is the ideal replacement for my 3-4 irons? Also, where does a 5 wood fit in the strategy for you guys/gals who have hybrids? (I have a TM 5 Wood 18 degree V Steel which I like).

For some reason I now have 2 56* rac's... how far can I get one of them bent? any one have experience with this, ideally I would like to get it bent to 59* or 60* can it be done with this particular wedge??? tks

I think most of us fanatics have now been out at least once or are getting out this weekend so this is a time of great hope. Over the winter most of us make some changes and this is the time of year to experiment. Curious as to what other members are starting the season with in their bags and why....

So I wanted to share my excitement with fellow club fanatics. I just purchased a Whiteboard from Toronto Golf Nuts, brand new uncut and it is the 63g model. I also decided to purchase a 2009 Taylormade Burner 9.5 degree head. I am thinking this combo is not going to be as low as I would like,...

anybody hit them of have them? most likely changing myfairway woods over and just curious to see if anyone has opinions ont he club. Tough to find but ive heard only good things.....change my mind?

I just picked one up yesterday with that 1$ promo thing that gets you an additional fairway wood. I hit it today,very sweet club. I like the new Aldila DVS shaft they put in it. The stiff is really stiff and feels nice, unlike other stock shaft that feel a bit flimsy. I find it really easy to shape...

I am a high handicapper (100-105). Looking into getting these. Think these will fit me well? or would these be a bit too advanced for me still? Just dont want to go out and get fustrated EVERY time :-p. Mind you I want something that I could move into.. I did some readings and they seem to...

Is anyone playing these? what is your opinion?

Good day! I've been looking at getting myself a new driver. Not that I hate my Ben Hogan C-S3 but sometimes, I feel like I'm constantly fighting with it in order to get a decent drive (almost like a love/hate relationship!!). I know you can go to golftown and hit a bunch of balls in the...

What would be the pro's and con's of cutting one's driver shaft from 45" to 44"?

I recently was fitted for golf clubs and since I'm 6'4 I added 2 inches in my irons but I go progressively shorter as it gets to my sandwedge at 1 inch and my 60' at standard length. I was told that I should get 2' upright since I was taller and had longer clubs and when I hit with a sticker on...

Hi Folks New to the site and new to the "technical" aspect of the game. (Been hacking for years, first serious kick at the game) My question is: I have had steel shafts in my fairway woods and now in my 3 and 4 hybrids and I hit them fairly staight, then comes my driver R7 CGB Max stock...

One thing I never really understood was how to choose the best angled driver. I really haven't test drove all that many drivers. But is there really a big difference in choosing a 9 degree driver versus a 10.5?

I just realized I don't know if my irons are RAC OS or RAC OS2. I always assumed they were OS, but now when I look at pictures of both models online, they look exactly the same. How can I tell them apart? Thanks.

Started seeing these on ebay has any one tried them???:scratchch...

Wow!!!! What a great time to buy or trade clubs and etcc.on this forum.Its like an explosion of equippement all of a sudden.A lot of great clubs at great prices.All in time for Easter.:):):)

so boys, I designed a putter. I can't believe no one has thought to design something like it before but i've checked and i'm the first. I just wanted to know, what should be my next step? I have a meeting with the machinist I selected to mill the head to go over specifics but it should be good...

Just wondering what would be your dream iron set if money was not an object.Something that you drool over whenever you see a picture of them. For me it would be the new Cally prototype forged irons sold at GolfTown for 1400.00. Remember money is no object and indicate what they sell for.:):)

something which crossed my mind, what does the R stand for in the Taylor Made series of drivers. R7, R9 and the new one due in three months, the R14 :) Roy

I'm finally getting to rekindle my love affair with golf this year (hurray!) I haven't played with any degree of regularity since 2001, so my gear is pretty outdated. (boo) I went to GT yesterday to try out a couple of drivers I was interested in, and particulary liked the Cleveland Hibore XLS....

R7 CGB limited edition. 499$ for this driver and a free fairway wood.. 2 questions !! 1, the shaft from CGB limited can be used in R9? 2, anyone has experience on how much duty I will pay? thank you!!

I am looking into getting a set of clubs (used) hopefully off OG. I am a high handicapper, I just started playing last year and bought a boxed set of top flite XL's They did the job for the first year, but I am looking to better myself. What should I be looking at for a better set of clubs...

I came across this driver, not sure if others were aware. I assume it will be released shortly. Kind of looks like the R7 Limited. This may be the driver for Indio:

Could anyone educate me :eek: on the loft and approximate distances of the Hybrids out there? I am looking at replacing my 3,4,5 irons with hybrids so essentially I will have from 6 iron up (and I only hit my 6 iron about 150 to 160 yards on a good day) :irked: I am going to pickup TM R7...

Looking for some opinions. Always played forged clubs either blades or cavity backs. I am not a forged club snob by any means. Anyways i bought a demo S59 iron and cut it down for one of my kids to goof around with. Upon taking a closer look at it the other day and this particular...

Anybody have any feedback on these irons? I've read on Golf Digest that the Ci7 were a best deal but nothing on the distance line. Thanks in advance

Hey all... so I'm looking at purchasing a new set of irons soon, and I'd also like to have them custom fitted at the same time. Where is the best place to have this done in the Ottawa area? Is GolfTown/Nevada Bob's the only option? Thanks guys.

I'll be interviewing Jim Grundberg from SeeMore Putters in the next couple of weeks. If anyone has any questions they'd like to ask him. LMK by PM. Thanks

I have been looking at getting one of these drivers for awhile and was just wondering your guys opinion on them. I was also looking t putting an ust frequency filter shaft in my putter and was wondering if they were all they were cracked up to be? Thanks for your opinions in advance

I just about popped a woodrow when I saw this on the TM website. Anyone have any ideas on when it is coming out and what the price is? http://www.taylormadegolf.com/product_detail.asp?pID=234&section=gallery#Large

Anyone try the new Taylormade Kia Ma putters yet? Saw that they arrived at Golftown. Heard good things about them but kind of pricey. Just checked the Taylormade site and no info on these putters.

Hi folks, I'm currently playing the old Nike ProCombo irons (the first generation), but am thinking about switching to something more forgiving on off-center hits. Trouble is, I really like the smaller head shape and minimal offset on the Nikes and most (if not all) "game improvement" clubs come...

What is teh difference between the new R9 and the TaylorMade r7 CGB Max Limited Driver... Thanks

I am thinking of trying a new wedge set up this year and I wanted your opinions. I plan on running Taylor Made Racs across the board, but I am tempted to try playing with a pitching (49*) a Gap (52*) and getting my 56* bent to 58*. I want to make this move so I can add a stick at the top since I...

How do I figure out the degree of loft on my Taylor Made bubble shaft SW?

I've used the new technology and found that the grooves shred the cover off my ball as well create too much spin at times. It was kind of cool watching my ball spin back but when it started spinning off the green it became annoying. So I went back to the old wedges and have saved a bundle on balls....

I will not be purchasing, trading or or otherwise acquiring in any way, a single golf club this year, new or used. If Golftown stock drops... so be it :-)