Forum: Club Making & Components

Does anyone know where I can get a .335 adapter sleeve for my R9? I'd need it shipped to Halifax. Plenty of them on ebay but I'm a little concerned about the quality of the overseas models. Thanks.

I am looking for a putter bending machine. Please text 705-367-4588 if you have one.

How do you know the standard length for a 3-wood - both for steel and graphite. Can you just take a driver shaft (assuming correct tip size), cut it down and place it in a 3 wood - or are shafts specifically designed for 3 woods, 5 woods, etc? thanks

I have been custome fitted for my irons - I'm 6'2- - so it was recommended that my irons be 1 degree upright. Would this also apply to putters? And if so, can I just buy a standard lie putter and have the shop change the lie angle? Thanks!

I have a 9 iron with a DG R300 shaft and I noticed that it's slightly bent. Is there someone on the forum with a spare R300 shaft that could replace it for me? Please PM me with any details i.e. cost, time to do, your location, etc. thanks

Does anyone know of a shaft selection database or something that exists ie."Shaft Selector" that would aid clubmakers in recommending new shafts or replacement shafts for customers. As a small clubmaker, it is difficult to stay on top of all of the new and old shaft options out there and their...

Does anybody here have experience with Grafalloy Blue shafts. I would like one installed in my Vulcan Driver but am interested in trying out the difference with spining or whatever you guys call it... I have the Grafalloy shaft and the driver head already. Anybody interested...?

ok all you clubmakers... If anybody is searching for components, just let me know. I have great deals on True Temper Bi-Matrix shafts as well as other generic graphite shafts. I also have rolls of 2 way tape for a good price. Just send me a PM...

I am looking at buying a driver head to experiment with. I am wondering how much it is to put a shaft into said head before I buy it. I suppose a grip would have to be installed as well. I don't need an exact price but a ball park figure would be nice. Thanks for the help.

Hey all. I am sending my putter in for a re-finish and would like to pull the shaft. I live in Val-des-monts QC between Edelveiss and le Sorcier. Anyone in that area able to do that for me? Thanks in advance.

Wondering if anyone knows where I could find a black putter shaft for the above mentioned putter. It is a TeI3 long slant Del Mar. What tip size would I be looking for. I see some black iron shafts but can't seem to find putter shafts. Thanks so much.

I have a 3-wood head I need to ship out. It is currently on a Purple Ice (s) shaft. Looking for someone to pull the head for me ideally saving the shaft so that I can offer it up for sale or perhaps use it myself. If the person pulling the shaft was interested in it then I am sure we can work...

Question: I've ordered a custom putter from a company in Europe and the head is currently being made. Once done, I need to supply the manufacturer with my preferred specs. How can I get a putter fitting for a reasonable cost considering I won't be purchasing a putter from anyone local? ...

I have a 13 year old who finds himself somewhere between juniour size clubs and ladies size. He has a set of Golfsmith Stingers, custom made last year, but he's grown about three inches since then. So I had him demo some used Lady Cobra's from CB's. He hits them quite well, and a little further...

I posted a couple weeks ago, but unfortunately had no response. I need a set built for a lefty 13 yo boy. He's a good young player who's outgrown his junior set. Looking to have a lady's set built from components. Would like somebody to fit and assemble a set for him. He's about 5' tall, and has a...

Hi gents, I'm not a club builder, but I do need one. I'd like to swap out an S flex HM Tour 60 Aldila (made for Cobra) for an R Flex shaft, preferably an SK Fiber Tour Trac 80 (but suggestions welcome), as they are currently installed in the 3,5,7 woods of existing set. Clubhead is the Cobra SZ...

as a follow-up to what was started in SMT-boys thread.... I am sure these have been posted before...nonetheless great reads from a great source Hopefully some good discussion ensues:P http://www.tutelman.com/golfclubs/frequency.php?ref=clubmakeronline ...

I have a few tweaks needed for the upcoming season a shaft swap here and there... I don't mind doing some of my own basic stuff... but would like any recommendations for someone who does good work? any suggestions? thanks

Watch this and see the results , you'll be surprised https://youtu.be/V8VbtElCnD0

Just wondering if there is anyone in Orleans who puts clubs together. Cheers

I'm looking for someone in the Orleans area who can replace a shaft in my 5-wood. I just bought a Fuji Vista Pro that I would like to have installed in my old taylormade 5-wood. Thanks for the help

I'm looking for someone in the Orleans area that can put together a club for me. I have a 2008 Taylormade Tour Burner TP head, and a brand new, uncut GD Pershing stiff shaft that I would like installed. I'm looking for the shaft to be tipped perhaps 1/2 an inch to play S/X ish... I don't have a...

Maybe someone here will know the answer. I had my lofts adjusted last year and the guy bent them up to more or less standard lie. They were pretty wacked so it was about time. I've noticed after playing through the end of last year that I find lie too upright. I've gotten used to it with most...

My pw just broke right off just above the head. I'm really worried about getting a replacement shaft that matches because they are 20 years old. I suspect I might be stuck getting a used club for the doner shaft. IF that's the case would a 9i work and just have it cut it down? Does...

golf works no longer has a clamp to do this. Golf town never did. Is there anywhere in the city to get this done? Thanks

Does someone do this? The shop I walked into the other day wouldn't touch it. I want the lie adjusted.

cheap hopefully :) I'm considering doing it myserlf, but I'd rather not if I don't have to. Thanks

I am looking for a Rifle FCM Chart. Does anyone have one that could be emailed to me?

I have been learning about back weighting grips in an effort to keep the total weight of the club more inline with a steel shafted club when reshafting irons with a light weight graphite shaft. Anyone out there with experience or feedback on this. I hit a few clubs that had different amounts of...

I'm looking for a comprehensive chart of comparitive shaft CPM's. I have found the one that Dynacraft offers. Does anyone have a better one. I notice that the frequency can differ depending on which site you look at. I would love an unbiased site that compared shafts based on butt, mid and tip...

I'm trying to figure out why reshafting my Ping i5 doesn't work...I bought some Rifle Project X 6.0 and some Ping i5 heads and after two try of reshafting the heads, it still doesn't work... The head of the irons are a bit loose, but the shaft is .355 and the specs for Ping i5 are also .355. ...

What is your opinion on regripping putters? Should you treat it like every other club in the bag when it comes to grips? To regrip or not? that is the question....

Hi, Do you guys have anywhere to suggest in Ottawa to look for aftermarket shafts? I got fitted by Taylormade yesterday for a driver, and unforunately the best fit for me was an R11 TP with a Diamana 'ahina shaft.. which comes up to a whopping total of $630. I currently hit an R9 with the OEM...

Just wondering if its a good idea to cut the length of your clubs to suite your height and swing? Is this a common thing to do or should I adjust to my clubs? Where in the city would you get analyzed for something like this?

New to golf and was just wondering what the difference is between a closed face and square face head on the driver:confused ? Scott

I was told I need a stiff flex for my driver. It currently has a regular flex. I have a Burner and was wondering with the costs, is it better to just buy a new driver with the stiff flex or simply just change it. By buying a new one, I would sell the old driver hopefully for 80. Opinions...

Had a fitting today and they suggested switching my stock graphite shafts in my Big Bertha 06 irons to some Dynamic Gold 370 steel shafts. Should I do this or should I save my money? Scott

I hear the shaft makes the difference. Just wondering what would be the benefits of changing the shaft in my Driver. CGB R7 Superfast 45g Stiff. I hit it well when I do hit it but spray it on occassion. Don't hit it as far as with my Burner but more consistent. Have a FUJI E380S 65g shaft thinking...

Can someone tell me the pro's and con's of having a 10.5* vs a 9.5* driver head with a low torque and high kick shaft. Thanks, Scott

https://youtu.be/37eeDv5lmlE

I was just wondering what everyone's opinion was on using shaft extensions rather then buying new shafts and them cutting them to desired length? Thanks in advance for any input.

I bought a Titleist 585h 19 degrees and I would like to put a new shaft in it. Just wondering what some of the good hybrid shafts are, and would it affect the how it plays if I put a fairway wood shaft in it? Thanks

I have a couple wedges that have the black finish on them, and i have been trying to get the finish off so it can rust. Anybody have any good ideas to get the finish off? thanks for any input

I have never regripped my own clubs but I have now decided that I am going to give it a try. I was just wondering if you could use acetone for grip solvent or should i just buy grip solvent? Thanks for any info

Hi I see that most of hybrids are .375 tip size but some of them are .335 tip size. Is it possible to put regular driver shafts into hybrids with .335 tips ? What would be the differences between driver/wood shafts and hybrid shafts ? Thanks

Hello folks I see that there are some differences between callaway clubs and other brand clubs for shafts installations and removing shafts. How can I remove shafts from callaway woods ? Thanks :P

Finally, I am tired of the drivers from the stores. More knowledge I know about golf club, more disappointed I have after hitting there BRAND NAME drivers.