Forum: Club Making & Components

http://forum.ottawagolf.com/showthread.php?99514-Cobra-One-Length-Forged-Tec-2022-1100&p=576579#post576579 Forgive my bluntness but the Sti2 were not designed for single length. Different lies, different weights, different ball position. If you're looking for forgiveness you'd have...

Which gets the thumbs up for outdoors. Based on accurate readings please.

Hi, cannot find (other than Japanese) info on shaft replacement options on my z101's. I assume ? all specific shaft models are same size & don't vary from club manufacturer to next on their models? Since they came with dynamic gold S300 and true temper says tip size of .355 does that mean any...

Set of 7 true temper 355 tapered tip xp 95 stiff shafts from 5 to gap wedge. Selling for $38 each at golfwork. $100 for the set

Currently considering the i95cw in regular flex but have also heard good things about the XCaliber iron shafts especially the cost. Anyone tried both and can comment on the differences in playability i.e. launch, spin, dispersion, feel, balance, etc. ? 1. do the XCalibers play true to flex? I'm...

If you have been trying to get a hold of Robin Arthur at Xcaliber Shafts by phone or email the last 4 weeks to ask about about the shafts he makes, apparently the phone has been disconnected and he hasn't been answering emails. I just heard today that Robin has been battling some very serious...

Is it possible to take the Speeder Shaft (done at Callaway) and move it from an 460 to and FT3?

WTB UST PROFORCE V2 GRAPHITE WOOD SHAFT (STIFF) and perhaps get installed into my 4 wood.

I cannot get one in Regina.

Looking at a set of iron heads 3-PW and am wondering who's got a set of shafts to go in them. Let me know what you got and your price. Grips not important as I will likely get them regripped. Regular or Stiff.

I need help guys.... I bought a Nike Ignite 460 on Ebay,and it came with a Reg. shaft.... I need to find somebody who will replace the shaft for me when I buy one .... Thanx ..... I'll pay to get it done Steve

If I've already been fit for my driver shaft would it be safe to assume the same shaft 10gs heavier would make a good wood shaft? I really don't want to go get fit again

Does anyone, still refinish old wood woods, and if so can you post a contact name & number. I have a lady that has a few and will not upgrade. Thanks

Can I put a .350 wood shaft into a .355 hybrid head? If so, do I follow the trim instructions for a 5W (or higher?) then cut the butt to length.

Anybody ever used them for greater feel and better shock absorption?? http://www.golfwrx.com/forums/index.php?showtopic=15326

ok so i have a Ping g10 driver and 4 wood with the ust v2 gold shaft in a stiff. now i just hate how my ball stays low trought out all the trajectory. now im still debating on if i need a regular or stiff shaft. i guess i would need my swing speed to know. but lets says i stay in a stiff shaft...

Hi all, If you are not using any extra weight, do you plug up the weight ports, or do you just let the epoxy fill the hole? And if you do plug up the port, how would you do it? Cotton ball?:confused

Must say that I am a believer in these clubs. I was @ the range in Barrhaven today with forum member downhillslider (Les) and he was kind enough to give me a session with all of his demo clubs. He is the new local sponsor of everything Wishon. These clubs are second to NONE. The feel of the...

O.k..i'm half way through Wishon's "Search for the perfect club" and i have to say i'm impressed with this guys aproach to club fitting:thumbsup What i cant understand is why some shafts cost 20 dollars and others cost 300? If im fitted lets say for a 60 gram shaft(for my perticular clubhead...

Wishon's new book is out. http://www.wishongolf.com/etechreport/2006/may/index.html#art1

Wishon's golf wrist to floor measurements http://groups.yahoo.com/group/shoptalk/message/71762

The new stuff is out and his website has been redesigned: http://wishongolf.com/downloads/TWGT_2007_Cat.pdf I like the looks of the new wedges he has.

Do Cx Wishon wedges really bite more?

Wishon videos about clubmaking http://www.wishongolf.com/etechreport/2009/march/index_std.html#art1

Do any of you clubmaker guys have the Wishon Trajectory Software?

I guess I can answer a lot of my questions by reading everything here: http://www.golfmechanix.com/twgt/MOI_FAQ/index.html Seems to be pretty thorough.

http://www.wishongolf.com/etechreport/2008/january/std-eTECH-january08.pdf

Does anyone here have one of these heads that they have actually hit? The premise is Tom designs everything now with GRT - which in reality is - he keeps the face of his woods flat for 2/3's of the height then puts a small amount of roll in the upper third. The goal is to give a more consistant...

Wishon Golf Explains the Difference in Bending Woods vs. Irons http://wishongolf.com/wishon-golf-explains-the-difference-in-bending-woods-vs-irons/

These are listed in the catologue but not on the website.. Does anyone know if they are out of stock or have they not been released yet?

For those who did not receive the email yesterday, Wishon is discontinuing the 550 line and has all remaining heads on for $19 a piece. If someone is placing an order, let me know as I may want to jump in and pick up a few spares. GarthM

I am interested in taking up club making and was wondering about the 4 day course offered by Golf Works. Is it worth the money and do you learn a lot. I am completely new to this but I am good with percision equipment, my hands, and manufacturing.

Whats the deal with these? Special shafts or can they be replaced? Anyone know the tip size?

I have a set of Nike Pro Combos that I have switched to Nippon 970 regular shafts. My problem is that they are too high. The flex is probably too soft. But stiff is too firm. I want to lower the spin rate and hopefully this will lower trajectory. Am I correct? Now if I am right what will...

Graphite Design Purple Ice 85-S SPECS --46" uncut --84 grams --.350 tip --.595 butt size --2.8* of torque --MID ballflight I'm asking because I know it's offered in .335 to .350 tip size and I don't want to buy this if it's no good for my club. Thanks

Can someone tell me why we have diffent shaft tip thicknesses? i.e. Why are some head bores .335 and some .350. What does that extra thickness do in terms of performance?

Who can do custom engraving in putters in the region? I'd like to get a sightline (or dots) for my Ping G2 Tess.

Guys, is there anyone in the city of Ottawa who could install 13 grips for me and if so, how much to do that? Rob

Hi there, I am looking to see if anyone or any club builder has a preference between the Grafalloy PROLITE 35 Wood Shafts and the Penley Tour Light Wood Shafts. Both shafts pretty much come out to the same specs based on information from the Golfworks website. I was wondering if anyone has...

Hi, I currently have a Grafalloy Pro-Lite 4.5, R flex (the head is a Golfsmith CM 350, 10*) and my launch angle has lowered since mid summer (swing modifications). Which shafts would be suitable replacements ? The lower angle hasn't affected total distance too much but I can't drive any hole which...

I often read a a lot of posts about one component company offering top of the line components but what I would like to know is what makes you believe that KZG is better than Golfworks or why Wishon is better than Golfsmith etc.. I am not asking about clones here. Keep in mind . Golwforks and...

Hi all I was wondering about learning how to make and fit clubs. Where should I start looking? Are there courses one can take? Thanks in advance

Where can I get one? I looked on GolfSmith and GolfWorks and neither of them carry Ozik. Thanks

I know many have suggested either Don or Les in the past, but neither of them are in business any more for various reasons. With that being said, is there another fitter that is recommended, or am I stuck with Golf Town/Kevin Haime/GolfTEC now? Edit: not to knock Kevin Haime's, I do get lessons...

Just wondering where the best and most convenient place to try different shafts. I currently have Titleist AP1 712 irons with the S300 shafts, which I think I need the R300 minimum. My shots are low flight and can't break the slice and with a club head speed of ~70mph. Any input would be...

I was just wondering if anyone knew where I could get this done. I talked to GolfWorks and they said they wouldn't do it, so I was just wondering if anyone here knew. Thanks!

Anyone know where I can buy a set of Tour Concept shafts localy.