Forum: Home Simulators - Hardware

Just got my Optishot and I'm working on a garage based setup for the winter. Can anyone tell me if I should be concerned with operating a projector in an unheated garage during the winter in temperatatures at or below freezing? I'm trying to decide whether to get a short thow projector...

I know this has been addressed previously but I can not find it......has anyone tried an alternate turf for the DD/Optishot system? I am speaking with HQ about it but I would appreciate any feedback/suggestions/etc. FYI, I am on my third piece of turf and I even reinforce the edge with epoxy...

I was checking to see what impact screen is now the favorite? I started with vinyl and am now ready to upgrade.....I am using vga benq graphics so perhaps I don't need to go to crazy?? Also interested in 'wrappin' the sides with netting to avoid rebound chasing! About a year ago, Cory was...

Hey Everyone, First off - I have used this forum to build my new golf projector/home theatre room and am very happy so far. Have not entirely finished the project and have a few final things to do. My question is: What do you put around the frame of my screen to protect the users from a...

I used the Vector Pro at Golfsmith but never really asked or looked at the machine up close. What type sensors does it use to measure. I see cameras but what are the light bulb looking things. Dave

Anybody know the cost of the system.

If I hit a shot 100 yards , 200 yards, 300 yards at 2° off-line how many feet is it off-line. Really I'm just looking for the mathematical formula or a calculator thanks Dave

I'm in the preliminary stages of planning a sim room, and want to make sure my understanding about projectors is correct. I'm looking at the Optoma GT760 Projector (http://www.projectorcentral.com/Optoma-GT760.htm). I'm planning on a 12 foot wide screen, so my understanding is that with this...

Hi everybody. I'm hoping there's an owner of the original Accusport Vector (model SVS 150) who can help me out. I just bought one and unfortunately it didn't come with an AC adapter, so I need to buy a replacement. The problem I have is that the polarity info for the adapter is not printed on the...

I want to have at least 1 camera recording my swing when I use my gc2 set-up. Was at a golftec today and was amazed by what they had for this. Basically it is always recording and a microphone picks up the ball strike and it automatically pulls up that swing. The best part was big plastic buttons...

I am currently looking for a projector but having trouble getting the size of screen I want with the throw distance I have to work with. I am just wondering has anyone done a rear projection setup with a short throw projector? I think the golf channel uses a set up like that. What kind of...

Has anyone modified the p3proswing stance mat to put in a cutout to use it as hitting mat? I would appreciate any details measurements ,tools, etc. for cutting if you have done this modification or know how to do it. thanks Dave

I understand p3pro has a new grass top upgrade called the II which is supposed to be softer and give you the feel of hitting a divot. Has anyone here have the new grass top and can give their opinions? thanks dave

Hello, What webcams are people using for the video capture? Specifically, I'm looking to do a 2 cam setup. No Launch Monitor package (yet), but if/when I do I guess I would be using 3 cams. Is that possible? I know Bubba recommended the ps3 eye cam. Is that hard to get working on the PC...

My impact screen has black ball / scuff marks all over it. They look more like rubber scuffs. I tried washing with soap and mr clean magic eraser. Didn't do a thing. Now I am looking for ideas to solve my problem that don't include getting a new impact screen because it is built into the...

I just came across this idea of building a golf simulator, when I found the OptiShot. Now I'm trying to cost everything out. I'm realizing a projector could be a significant investment. I'm not looking for top of the line HD. I just really want a decent projector that will do the job. I can...

Hi guys, I am smack in the middle of building my protee sim.... pretty excited about it. After visiting a virtual golf center last night to talk to the owner for some more learning... I was super impressed with his setup.... he had a machine that electronically tees up your ball for you......

I have a gc2 with starter pack (driving range, one course and club fitting software). I wanted to purchase a video card that will help me maximize the potential of the software. What video card would your recommend?

I was looking at your old picture of the garage after the set up was complete. I see a black garage door opener not too far from the screen. How did you manage to mount projector behind it without casting shadow?

I am very pleased with my purchase. All I can say is that it is a perfect fit and holding up fine. It should outlast the life of my Versa stance mat. I have dealt with bad reviews before purchasing this product. But I trusted Cory's opinion and went with it. I couldnt afford any down time on my...

we all know that this option exists, but we know very little about it. i have been contemplating on purchasing a vector but I have a hundred questions that have not been answered. all i want is a more realistic ball flight that measures launch and assist in ball tracking. sometimes I feel that...

I have the Net Return (hopefully will get converted to the simulator version soon). I paired it with Country Club Elite golf mats sold by J McGrath and the experience is unbelievable. My mat dimension is 10 X 6 and only 1" high because I didn't want the 5/8 thick foam under layer due to having...

Hi All, I'm in the process of setting up my first golf sim and need some ideas on flooring options. I'm building my sim on the 3rd floor(top floor) of a cement building and I'm a bit worried about the sound transmitting to the unit below. My first idea was 1" foam gym matting with astro turf...

Hi all, I know there are many ways to attach a impact screen. My plan is to use bungee cords off of my enclosure frame. I can get the cord material in various diameters locally. What I'm un-sure of is how long to make the bungees and what would be the best diameter? I'm thinking 6 inches from...

Anyone buy the GC2 cradle from Foresight? If so how thick is the aluminum it's made of? I was thinking of making one myself as it looks kind of flimsy on their website. Any thoughts?

What kind of running time are other GC2 users getting out of your battery? My unit is new and I don't get more than 4 hours out of the battery on a full charge. I've let it run down completely then fully charged it a few times and it seems to still have a rather short battery life. ...

Just curious what others are doing for club storage in your simulators? I have 3 full sets of clubs, plus a set of misc clubs I've built over the years, plus 12 demo clubs for club fitting, plus any guest sets that friends bring over. I'm finding I don't have enough room in my simulator to store...

Hi Guys, I have a “new” old Vector Pro (with manual lens) in a very well light controlled indoor environment. The problem that I have with the unit is with its microphone. The software vector pro 2.11 strongly recommend using the default sensitivity (in advanced mode) setting. For me that...

I looked at my Vector Pro microphone; it looks like it sits around 1” from the case opening. Can someone take a look at his/her Vector Pro and confirm that the microphone is really that far back? When I look into the opening for the microphone, I can see the circuit board with the microphone...

Hi all, I have loved the info on this site as I begin the process of building a golf sim with optishot in our office...we have punched out a wall to build out from a storage room...reason being one of the 4 guys who will be using it mostly at work is left handed!!! made setup 100 times more...

Trying to identify the best option for an indoor impact screen that allows for a clear projection, can withstand the force of foam golf balls -- and can be 'whisked' away at the request of the wife. Does anyone use a pulldown/standard movie projector screen? Any/all creative recommendations...

Hello guys, I'm looking for ideas or alternatives. The only suitable space for my golf simulator would be my 2 car garage since it has a 11' ceiling. The only problem is the setup needs to be removable so I can park my cars. I was thinking a retractable impact screen hung from the ceiling. ...

For those of you who are not fully satisfied with the original turf the Optishot came with, what did you end up replacing it with? I know there's some pre-made options but I'm considering purchasing a thicker turf as a replacement and simply cut out the strip for the sensors. What's the thickest...

Hi everybody! Im new to the forum, and new to the golf game but Became addicted very quickly.. I played about 30 games in 3 months but now winter Is almost here and ill be stuck inside for a while.. So i am planning to build myself a garage golf simulator Setup in the next few weeks....

My 2 cents on my sim setup for under 1000$ built from scratch First of I have built myself a 22'x18' Detached garage sim room/workshop. The cost of that thing I will leave aside obviously. So for the simulator setup here is my cost break down : Simulator: DD optishot 2 bought on black...

Has anyone used construction scaffold mesh to hit real balls into? That stuff is quite strong and widely used in construction so can be found relatively cheap. I don't want to waste money on it if people have already tried and found it lacking.

I've been looking for a good short throw projector for my GC2 to fit an image onto a 12x9 screen, i'm afraid i'm way out of my element and would like suggestions. My screen is not as big as others since I am choosing portability over anything. I can have the projector mounted anywhere from 10 to 8...

Building a golf simulator in my basement and need some help with picking out a projector (one of the last pieces). Screen is 110" wide, 84" high, 138" diagonal. Would like a throw distance of about 14 - 15 feet so the projector is mounted behind the hitting mat area (11 - 12 feet). I've been...

Finally decided on the ProTee Base Pack 2, includes putting, both cameras ,ProTee2.o and TgC. question now is where to buy?? Swingsense? Golfsimguys? Par2Pro??Spectrum Golf Could use some help.....I am in Michigan

Hi guys, I hope all is well my name is Mark and I am new to this forum. Hopefully one day I will be able to contribute to the forum. I have a question. Hopefully some one on here can help me out. I'm looking for a golf simulator that is very accurate, I will be using this simulator for mostly...

I really like this setup. Are there other options that give easy setup and doesn't take up space like this net? I do like the 8X8 footprint. I also like the projector setup on top. For 2K a bit steep. Any other options out there?

I have been away for a bit. What is the current price for a HMT to connect to the GC2. I am hoping they are a bit cheaper so I can make the plunge! Thanks!