Forum: Home Simulators - Hardware

I am newbie trying to build my simulator. Where do I start with trying to figure out what projector I need?

What length, quantity and strength of Bungee cords should I buy to attach a 12'x9' screen? I attached metal angle to the wall and ceiling. There is 5"of space between the straps/eyelets and the metal angle. I would like to buy these on Ebay. Thanks for your help!!!

I have read several review articles on business versus home theater projectors. Generally business projectors have higher lumens in order to project larger images in the present of ambient light at various throw distances. I would think these characteristics would be ideal for a golf simulator. ...

I am setting up a simulator in a room with vaulted ceilings. Plenty of room to swing if I stand off center but regarding the cage, I could do either 10 x 9 or 8.5 x 10. Assuming I have a 5’ depth, which dimension is preferred? This would be a right hand setup only. I assume the extra width...

Anyone have a recommendation for a camera that can be connected to my PC so I can film my golf swing. I have cameras that I use for family movies, but I need something that is more wide angle because when filming front on swings I only have a limited amount of space to back up the camera. I have V1...

I want to have at least 1 camera recording my swing when I use my gc2 set-up. Was at a golftec today and was amazed by what they had for this. Basically it is always recording and a microphone picks up the ball strike and it automatically pulls up that swing. The best part was big plastic buttons...

I looked at my Vector Pro microphone; it looks like it sits around 1” from the case opening. Can someone take a look at his/her Vector Pro and confirm that the microphone is really that far back? When I look into the opening for the microphone, I can see the circuit board with the microphone...

For those interested and possibly might be a good deal to get started with your golf sim, cowboom.com is selling these for $224.99 USD shipped. This is the XJ-A140 model. These seem to be refurbished as many of the projectors have 0 operating hours. For those who know projectors, how is...

What is the best way to clean ball marks from impact screen?

Hi, wondering where I can find some in Canada? located in Toronto, but dont mind shipping. What is the going price per sq/ft usually? Any help would be much appreciated.

There is no sim that does ball and club data under $10,000 as far as I can tell. But, under that admittedly high price point can a combo system work? If you're willing to drop the money on a launch monitor and really want club data can you do it for an extra $1000? Hit the ball off an Optishot ...

Hey guys! First post on the forum. We are in the process of getting loan approval for a commercial simulator facility. We are struggling with which projector to use. Each sim bay will be approximately 13' wide by 10' tall for screen and 20' deep. We are going with Foresight Kiosk for the FSX...

Finally I've decided to pull the trigger on a ProTee system, in the end the righty lefty issue for general play weighed heavily into the decision, plus I figure I can always add a launch monitor at a later date, when and if they ever become more affordable. Any hoo... does anyone have any...

Have vector pro with upgraded microlenses , e6 software may upgrade launch monitor in a few years. Looking at alienware x51r2 desktop computer processor i5- 3ghz- 8gb memory- 1tb hard disk- win 7 - dedicated graphics -graphics card nvidia gtx 645 factory refurbished 675 dollars. Will this work ???...

I'm not a computer expert...just wondering if this would work with DD... http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=719446&Sku=H25-3325100

I am looking at the p3 pro but I have to purchase a computer to use it since I have a Mac. Is it reasonable to think I can go to a big box store and spend under 400 on a computer that will only be used for this program. Any suggestions on exact computers would be appreciated.

I am now looking at buying some material for my screen and was wondering is there a real difference between NYLON CORDURA 600 and Nylon Cordura 1000....and which would be better?? the reason i am asking is I found the 1000 cheaper on ebay than the 600??/

Crenova is the popular brand for making a wide range of high quality video projectors at reasonable prices. If you are looking to buy a Crenova video projector, please check Crenova XPE680 video projector that comes with advanced features and great capabilities. It allows flexible connectivity...

I have looked again at Corys video of the AG curved screen and the info on their website; aG SimSurround Curve – A dramatic enhancement to the immersive experience available on aboutGolf simulators, the SimSurround Curve takes the aboutGolf-invented, triple-screen, wrap-around original version...

Does anyone have any experience with the Custom Design Golf DivotAction mat? It looks like it could be a nice mat that would eliminate some of the shock that occurs at impact, but I have no experience with CDG or the mat. Any thoughts? Thanks

Has anyone tried these tops. They have them at custom golf designs.

Hi all I have always been keen on having a home studio for the winter months here in Scoland. I live nowhere near a driving range and I'm sure having the ability to hit balls over the winter would help my game. Using half of my garage gives me a hitting space of 21 feet long x 9.5 feet wide...

I see a lot of people using BenQ or other DLP projectors for their sim. Do you guys not notice any rainbow effect from the DLP?

Anyone have suggestions for what to use to bond turf to those blocks you can u that fit together like a puzzle? I tried using spray adhesive with no luck. Could have been too cold outside for the glue to take effect? Next up is gorilla glue unless someone else has a better suggestion?

Curious if anyone uses the Foresight FSX software in 4k projection? I am going from 720P to at a minimum to 1080p. Not sure if you see a big different from 1080p to 4k in a non gaming mode - mostly on the range and club fitting mode.

I am looking into the Sping Tech duramat for my GC2 sims. I like the option of using my own wooden tee with the GC2, since i can hit from the same spot driver and irons with the GC2. Anybody has any experience with this particular model?? Thanks!

Does anyone have any experience with this projector? I got one as a hand me down when my brother upgraded to a 3D projector. It's a 1080p projector but only rated for 1800 lumens. It's a little dimmer than I'd like. Right now I have it set up in my den where there's decent ambient light. I'm...

Has anybody got any hands on experience with one of these? Just came across this while reading an article on "hot products" at the 2012 PGA Show. http://www.ernestsports.com/es12/

Hi there, just wondering which projector to go with , my screen is about 118 inches wide and about 101 inches high, I am able to mount the projector anywhere so that's not a problem , looking not to cheap out , I hear allot of talk about the Benq 1085 st but it seems the lumins are a bit shy , is...

I don't know what to do about screens. After a fraying issue with the PR20 from hitting hundreds of wedges into the same spot on the screen, I switched to the HQ Raw from Par 2 Pro. Now I've managed to put a hole through that screen with a 3 wood. :( (165mph ball speed) Spoke with Corey and...

I am thinking about getting -- Refurbished FlightScope Prime Kit Included: FlightScope Prime sensor upgraded with latest available microwave radar panel + Hard carry case with custom cut out foam + Portable Power Outlet + Lightweight Laptop stand with FlightScope branded cover/hood

Can anybody tell me if the camera for auto-focusing and the automatic leveller on the X2 complete model are absolutely necessary? The X2 basic model is about $2000 cheaper and does not have these two features. I live in Australia. A dealer over here is offering a new X2 basic model and new 16G...

Hi All, I'm in the process of setting up my first golf sim and need some ideas on flooring options. I'm building my sim on the 3rd floor(top floor) of a cement building and I'm a bit worried about the sound transmitting to the unit below. My first idea was 1" foam gym matting with astro turf...

Hi everyone. Just picked up a used X2 that will be here in a few days. I'm going to be putting something dedicated together (probably a new room off the basement) in the spring but wanted to get something setup to test it out and hit some balls over the winter. I'm in the process of finishing...

From reading the specs on Foresight's website, it looks like a GC2 without the LCD read-out...in other words, you need to use it with software. Anybody have more information on it other than the website? Curious to see what it will cost....